Networks - MIKROTIK EOIP

Apos a criação da conectividade entre os mikrokis foi criado o tunnel eoip via winbox

1 adicionar o tunnel eoip

2 mtu 1500

3 ip local e remote

4 id do tunnel igual dos dois lados

5 - criar a conexão bridge entre a lan e o tunnel para ficar no mesmo dominio de broadcast

Criação EoIP

[admin@MikroTik] > interface eoip print

Flags: X - disabled, R - running

0 R name="TUNNELTESTE" mtu=1500 actual-mtu=1500 l2mtu=65535

mac-address=02:3A:B9:32:64:EF arp=enabled arp-timeout=auto

loop-protect=default loop-protect-status=off

loop-protect-send-interval=5s loop-protect-disable-time=5m

local-address=192.168.2.2 remote-address=192.168.50.2 tunnel-id=10

dscp=inherit clamp-tcp-mss=yes dont-fragment=no allow-fast-path=yes

[admin@MikroTik] >

[admin@MikroTik] > interface bridge print

Flags: X - disabled, R - running

0 R name="bridge1" mtu=auto actual-mtu=1500 l2mtu=65535 arp=enabled

arp-timeout=auto mac-address=02:3A:B9:32:64:EF protocol-mode=rstp

fast-forward=yes priority=0x8000 auto-mac=yes

admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s

transmit-hold-count=6 ageing-time=5m

[admin@MikroTik] >

Referencia