Default password <admin> senha <sem senha>

Por Default a port 1 fica em dhcp. 

Comandos básicos 

[admin@MikroTik] > ip route print

Flags: X - disabled, A - active, D - dynamic,

C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,

B - blackhole, U - unreachable, P - prohibit

 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE

 0 ADS  0.0.0.0/0                          192.168.1.254             1

 1 ADC  192.168.1.0/24     192.168.1.88    ether1                    0

 2 ADC  192.168.100.0/24   192.168.100.1   ether2                    0

 3 ADC  255.255.255.0/32   192.168.100.1   ether2                    0

[admin@MikroTik] > ip address add interface=ether2 address=192.168.100.1 netmask=255.255.255.0 network=192.168.100.0

[admin@MikroTik] > ip address print

Flags: X - disabled, I - invalid, D - dynamic

 #   ADDRESS            NETWORK         INTERFACE

 0 D 192.168.1.88/24    192.168.1.0     ether1

 1   192.168.100.1/32   255.255.255.0   ether2

 2   192.168.100.1/24   192.168.100.0   ether2

[admin@MikroTik] >

[admin@MikroTik] > ip arp print

Flags: X - disabled, I - invalid, H - DHCP, D - dynamic, P - published,

C - complete

 #    ADDRESS         MAC-ADDRESS       INTERFACE

 0 DC 192.168.1.254   E0:1F:ED:BD:76:48 ether1

 1 DC 192.168.1.66    34:97:F6:94:AA:2F ether1

[admin@MikroTik] >

checando server dhcp 

[admin@MikroTik] > ip dhcp-server print

Flags: X - disabled, I - invalid

 #   NAME     INTERFACE     RELAY           ADDRESS-POOL     LEASE-TIME ADD-ARP

 0   lan      ether2                        static-only      10m