J. Noh, P. Kim*, Y.-J. Yoon*, Near-critical bistable shock isolator designed with symmetry-breaking extension springs, Journal of Sound and Vibration 633 (2026) 119691. 🔗

J. Noh, A. Andreu, P. Kim*, Y.-J. Yoon*, Torsional stiffness-softening effect of torque-dependent variation in moment arm length for torsional vibration isolation, Nonlinear Dynamics 113 (2025) 21073–21093. 🔗

J. Noh, P. Kim*, Y.-J. Yoon*, Asymmetric bistable shock isolators for repeated force-transfer nullification using optimal payload return, Mechanical Systems and Signal Processing 225 (2025) 112265. 🔗

J. Noh, P. Kim*, Y.-J. Yoon*, Nonlinear shock isolation using the bottleneck phenomenon near a saddle–node ghost, Mechanical Systems and Signal Processing 223 (2025) 111889. 🔗

J. Noh, P. Kim*, Y.-J. Yoon*, Bistable shock isolator tuned to zero-frequency singularity for platform protection, Mechanical Systems and Signal Processing 210 (2024) 111158. 🔗

J. Noh, P. Kim, Y.-J. Yoon*, Competitive advantages of a bistable vibration isolator: Cut-off frequency and operational safety near harmful resonance, Journal of Sound and Vibration 570 (2024) 118004. 🔗

J. Noh, Y.-J. Yoon*, P. Kim*, Anhysteretic high-static–low-dynamic stiffness vibration isolators with tunable inertial nonlinearity, Nonlinear Dynamics 112 (2024) 2569–2588.  🔗

J. Noh, S. Bae, Y.-J. Yoon*, P. Kim*, Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism, Sensors 23 (2023) 5978. 🔗

J. Noh, M. S. Nguyen, P. Kim*, Y.-J. Yoon*, Harmonic balance analysis of magnetically coupled two‑degree‑of‑freedom bistable energy harvesters, Scientific Reports 12 (2022) 6221. 🔗

J. Noh, P. Kim*, Y.‑J. Yoon*, Load Resistance Optimization of a Magnetically Coupled Two-Degree-of-Freedom Bistable Energy Harvester Considering Third-Harmonic Distortion in Forced Oscillation, Sensors 21 (2021) 2668. 🔗

S. Bae, P. Kim*, Load Resistance Optimization of Bi-Stable Electromagnetic Energy Harvester Based on Harmonic Balance, Sensors 21 (2021) 1505. 🔗

M. S. Nguyen, Y.‑J. Yoon, P. Kim*, Enhanced broadband performance of magnetically coupled 2‑DOF bistable energy harvester with secondary intrawell resonances, International Journal of Precision Engineering and Manufacturing-Green Technology 6 (2019) 521–530. 🔗

M. S. Nguyen, Y.‑J. Yoon, O. Kwon, P. Kim*, Lowering the potential barrier of a bistable energy harvester with mechanically rectified motion of an auxiliary magnet oscillator, Applied Physics Letters 111 (2017) 253905. 🔗

O. Kwon, P. Kim, Y.‑J. Yoon*, Reduction of control signal overhead for electric vehicle charging operation in smart grid system, International Journal of Precision Engineering and Manufacturing-Green Technology 4 (2017) 191–197. 🔗

O. Kwon, P. Kim, Y.‑J. Yoon*, Threshold-based random charging scheme for decentralized PEV charging operation in a smart grid, Sensors 17 (2017) 39. 🔗

P. Kim, M. S. Nguyen, O. Kwon, Y.-J. Kim, Y.-J. Yoon*, Phase-dependent dynamic potential of magnetically coupled two-degree-of-freedom bistable energy harvester, Scientific Reports 6 (2016) 34411. 🔗

 P. Kim, D. Son, J. Seok*, Triple-well potential with a uniform depth: advantageous aspects in designing a multi-stable energy harvester, Applied Physics Letters 108 (2016) 243902. 🔗

 P. Kim, Y.-J. Yoon, J. Seok*, Nonlinear dynamic analyses on a magneto-piezo-elastic energy harvester with reversible hysteresis, Nonlinear Dynamics 83 (2016) 1823–1854. 🔗

P. Kim, E.H. Ong, Y.-J. Yoon*, H.K.H. Li*, N.S.H. Gary and P. Khuntontong, Low-cost, disposable microfluidics device for blood plasma extraction using continuously alternating paramagnetic and diamagnetic capture modes, Biomicrofluidics 10 (2016) 024110. 🔗

P. Kim, J. Seok*, Dynamic and energetic characteristics of a tri-stable magnetopiezoelastic energy harvester, Mechanism and Machine Theory 94 (2015) 41–63. 🔗

X.Y. Wang, S. Lee, P. Kim, J. Seok*, Aerodynamic effect of 3D pattern on airfoil, Transactions of the Canadian Society for Mechanical Engineering 39 (2015) 537–545. 🔗

J. Jung, P. Kim, H. Kim, J. Seok*, Dynamic modeling and simulation of a nonlinear, non-autonomous grinding system considering spatially periodic waviness on workpiece surface, Simulation Modelling Practice and Theory 57 (2015) 88–99. 🔗

J. Jung, P. Kim, J.-I. Lee, J. Seok*, Nonlinear dynamic and energetic characteristics of piezoelectric energy harvester with two rotatable external magnets, International Journal of Mechanical Sciences 92 (2015) 206–222. 🔗

S. Lee, D.-Y. Jang, X.Y. Wang, P. Kim, W. Sun, J. Seok*, Lubrication characteristics of a textured porous sliding bearing, Advances in Mechanical Engineering 7 (2015) doi: 10.1177/ 1687814015573618. 🔗

W. Sun, J. Jung, X.Y. Wang, P. Kim, J. Seok*, D.-Y. Jang, Design, simulation, and optimization of a frequency-tunable vibration energy harvester that uses a magnetorheological elastomer, Advances in Mechanical Engineering 7 (2015) 147421. 🔗

P. Kim, J. Seok*, A multi-stable energy harvester: Dynamic modeling and bifurcation analysis, Journal of Sound and Vibration 333 (2014) 5525–5547. 🔗

P. Kim, J.-I. Lee, J. Seok*, Analysis of a viscoplastic flow with field-dependent yield stress and wall slip boundary conditions for a magnetorheological (MR) fluid, Journal of Non-Newtonian Fluid Mechanics 204 (2014) 72–86. 🔗

P. Kim, J. Jung, S. Lee, J. Seok*, Stability and bifurcation analyses of chatter vibrations in a nonlinear cylindrical traverse grinding process, Journal of Sound and Vibration 332 (2013) 3879–3896. 🔗

P. Kim, S. Bae, J. Seok*, Bifurcation analysis on a turning system with large and state-dependent time delay, Journal of Sound and Vibration 331 (2012) 5562–5580. 🔗

P. Kim, S. Bae, J. Seok*, Resonant behaviors of a nonlinear cantilever beam with tip mass subject to an axial force and electrostatic excitation, International Journal of Mechanical Sciences 64 (2012) 232–257. 🔗

P. Kim, J. Jung, J. Seok*, Free flexural vibrations of a piezoelectric bimorph plate with periodic edge conditions, Journal of Vibroengineering 14 (3) (2012) 951–960. 

P. Kim, J. Seok*, Bifurcation analyses on the chatter vibrations of a turning process with state-dependent delay, Nonlinear Dynamics 69(3) (2012) 891–912. 🔗

P. Kim, J. Seok*, Viscoplastic flow in slightly varying channels with wall slip pertaining to a magnetorheological (MR) polishing process, Journal of Non-Newtonian Fluid Mechanics 166 (2011) 972–992. 🔗

P. Kim, J. Jung, J. Seok*, A parametric dynamic study on hunting stability of full dual-bogie railway vehicle, International Journal of Precision Engineering and Manufacturing 12(3) (2011) 505–519. 🔗

P. Kim, J. Seok*, Dynamic modelling and simulation of a cryogenic carbon dioxide cleaning process, Proc. IMechE–Part E: Journal of Process Mechanical Engineering 224 (2010) 213–221. 🔗

P. Kim, J. Seok*, Bifurcation analysis on the hunting behavior of a dual-bogie railway vehicle using the method of multiple scales, Journal of Sound and Vibration 329 (2010) 4017–4039. 🔗

Y. Kim, P. Kim, J. Lee, J. Seok*, Characterization and parameter optimization of a microcellular polypropylene electret under an external inertial load, International Journal of Precision Engineering and Manufacturing 10(5) (2009) 97–106. 🔗

Y. Kim, P. Kim, J. Seok*, Piezoelectricity of a microcellular polypropylene electret under an external inertial load, Japanese Journal of Applied Physics 48(2009) 031402 (10pp). 🔗

P. Kim, W. Sun, J. Seok*, High-dimensional harmonic balance analysis for a turning process with state-dependent delay, The 3rd International Conference on Advances in Materials and Manufacturing Processes, Dec. 2012, Beihai, China, MP5002.

P. Kim, J. Jung, J. Seok*, Free flexural vibrations of a piezoelectric bimorph plate with periodic edge conditions, The 2nd International Conference on Engineering and Technology Innovation, Nov. 2012, Kaohsiung, Taiwan, J1175 .

S. Lee, P. Kim, J. Park, J. Seok*, Investigation of the lubrication characteristics of an artificial hip joint using a CFD, Proceedings of the International Conference of Manufacturing Technology Engineers 2012, Oct. 2012, Seoul, Korea, p. 81.

S. Lee, P. Kim, J. Seok*, A dynamic analysis on the contaminant particles’ removal mechanism in cryogenic carbon dioxide (CO2) cleaning process, e-Science: All Hands Meeting 2008, Sep. 2008, Daejeon, Korea, pp. 104–106.

P. Kim, J. Seok*, A dynamic analysis on the collision between particles for CO2 snow cleaning, McMat 2007 ASME—Applied Mechanics and Materials Conference, Jun. 2007, Austin, Texas, USA, 30611.