BTT TFT35 E3 Housing
The display stand is based on this project by 3Deddy on Thingiverse.
In my integration the display is fixed to the roof of the enclosure and it is possible to rotate it in 3 positions: closed, normal, with view from above
Closed display
Normal Position
View from TOP
Instructions e materials needed :
You need :
1x DIN 912 M6x30 screw
1x M6 nut
3x self taping screw
Download the 3Deddy project and print only the following files:
1x : Front_V1.stl
1x : Stand_off_top_right_V1.stl
1x : Stand_off_top_left_V1.stl
2x : Stand_off_bottom_LR_V1.stl
Print my pieces that you find here on Thangs
Print Tips:
Print with this orientation
Nozzle: 0.4
Layer: 0.2
perimeter: At least 3 walls
Supports: no
top/bottom: 5 layers
Infill : 10~15%
You need to modify the head of the M6 screw by removing about a millimeter from one side in order to make the head from round to a D-shaped profile. This can be done simply by using sandpaper.
The modified screw
The diameter should go from 10mm to just under 9
A perfect tight fit