Guo-Ming Sung, Chong-Cheng Huang, Xiong Xiao, and Shih-Ying Hsu, “10-Bit 5 MS/s Successive Approximation Register Analog-To-Digital Converter with a Phase-Locked Loop and Modified Bootstrapped Switch for a BLDC Motor Drive,” Electronics, 2022, 11, 624, pp. 1-23, February 2022.
Guo-Ming Sung and Naga Raju Naik.R, “A Low Power and High-Speed Conditional-Precharge Sense Amplifier Based Flip-Flop Using Single Ended Latch,” International Journal of Electrical and Computer Engineering, 16, 1, pp. 1-5, January 2022.
Chong-Cheng Huang, Guo-Ming Sung, Xiong Xiao, Shan-Hao Sung, and Chao-Hung Huang, “Ten-bit 0.909-MHz 8-channel dual-mode successive approximation ADC for a BLDC motor drive,” Electronics, 10, 830, pp. 1-18, October 2021.
Guo-Ming Sung, Chun-Ting Lee, Xiong Xiao, and Leenendras-Chowdary Gunnam, “4th-order switched-current multistage-noise-shaping delta-sigma modulator with a simplified digital noise-cancellation circuit,” IEEE Access, 8, pp. 168589-168600, September 2020. (MOST 108-2221-E-027-092, NTUT-USTB-109-02)
Guo-Ming Sung, Chun-Ting Lee, and Zhao-Long Chen, “Buck converter IC for brushless DC motor drive using voltage-mode PWM controller,” IET Power Electronics, 13(12), pp. 2555-2561, July 2020.
Guo-Ming Sung, Li-Fen Tung, Hsin-Kwang Wang, and Jhih-Hao Lin, “ USB transceiver with a serial interface engine and FIFO queue for efficient FPGA-to-FPGA communication,” IEEE Access, 8 , pp. 69788-69799, April 2020.
Guo-Ming Sung, Yen-Shih Shen, Chih-Ping Yu, and Zhi-Lun You, “A Two-Port–Two-Port Serial Interface Between RS485 and Ethernet with FIFO Queue for Efficient PC-to-PC Communication,” IET Networks, 9 (3), pp. 102-109, April 2020. (MOST 106-2221-E-027-075)
Guo-Ming Sung, Chao-Kong Chung, Yu-Jen Lai, and Jin-Yu Syu, “Small-area radiofrequency energy harvesting integrated circuits for powering wireless sensor networks,” Sensors, vol. 19, no. 1754, pp. 1-22, 2019.
Guo-Ming Sung, Yen-Shin Shen, Jia-Hong Hsieh, and Yu-Kai Chiu, “Internet of Things–based smart home system using a virtualized cloud server and mobile phone app,” International Journal of Distributed Sensor Networks, vol. 15, no. 9, pp. 1-13, 2019. (MOST 106-2221-E-027-075)
Leenendra Chowdary Gunnam, Guo-Ming Sung, Lei-Wen Weng, and Te-Chia Fan, “2-1 switched-current multi-stage noise-shaping delta-sigma modulator with a digital noise-cancellation circuit,” IET Circuits, Devices and Systems, vol. 13, no. 3, pp. 327-336, 2019. (MOST 106-2221-E-027-075)
Guo-Ming Sung*, Leenendra Chowdary Gunnam, and Shan-Hao Sung, “Switched-Current Sampled and Hold Circuit with Digital Noise Cancellation Circuit for 2+2 MASH ƩΔ Modulator,” Advances in Intelligent Systems and Computing, ASIC 998, pp. 396-405, 2019.
Guo-Ming Sung, Hsin-Kwang Wang, and Leenendra Chowdary Gunnam, ”A one-dimensional magnetic chip with a hybrid magnetosensor and a readout circuit,” Journal of Sensors, vol. 2018, ID 6436481, pp. 1-10, March 2018. (MOST 103-2221-E-027-014-CC3)
Guo-Ming Sung, Leenendra Chowdary Gunnam, and Wen-Sheng Lin, “Three-dimensional CMOS differential folded Hall sensor with bandgap reference and readout circuit,” IEEE Sensors Journal, vol. 18, no. 2, pp. 517-527, January 15, 2018. (MOST 103-2622-E-027-014-CC3)
Guo-Ming Sung, Wei-Yu Wang, and Chih-Ping Yu, “Analysis and modeling of one-dimensional folded vertical Hall sensor with readout circuit,” IEEE Sensors Journal, vol. 17, no. 21, pp. 6880-6887, November 1, 2017. (MOST 103-2221-E-027-014-CC3)
Guo-Ming Sung, Leenendra Chowdary Gunnam, Wen-Sheng Lin and Ying-Tzu Lai, “A third-order multibit switched-current delta-sigma modulator with switched-capacitor flash ADC and IDWA,” IEICE Trans. Electron., vol. E100-C, no. 8, pp. 1-10, Aug. 2017. (MOST 103-2221-E-027-048)
Guo-Ming Sung, Wei-Yu Wang, Wen-Sheng Lin and Chin-Ping Yu, “Predictive direct torque control Application-specific integrated circuit of an induction motor drive with a fuzzy controller,” J. Low Power Electro. Appl., vol. 7, no. 15, pp. 1-16, June 2017. (MOST 103-2221-E-027-048) (doi: 10.3390/jlpea7020015)
Guo-Ming Sung, Wen-Sheng Lin and Hsing-Kuang Wang, “A distance detector with a strip magnetic MOSFET and readout circuit,” Sensors, vol. 17, no. 126, pp. 1-15, January 2017. (doi: 10.3390/s17010126 ). (MOST 103-2221-E-027-014-CC3)
Wen-Sheng Lin, Guo-Ming Sung* and Jyun-Long Lin, “High performance CMOS light detector with dark current suppression in variable-temperature systems,” Sensors, vol. 17, no. 15, pp.1-12, January 2017. (doi: 10.3390/s17010015)
Guo-Ming Sung, Wen-Duen Chou, and Chih-Ping Yu, “A 10-bit 1.8 V 45 mW 100 MHz CMOS transmitter chip for use in an XDSL modem in a home network,” Analog Integr Circ Sig Process, Vol. 81, pp. 515-527, Sep. 2014.
宋國明、梁凱翔,“預測型直接轉矩控制系統晶片”,電機能源論壇,第二期,pp.64-71,March 2013。
Guo-Ming Sung, Ying-Tzu Lai, and Yueh-Hung Hou, “A third-order switched-current delta-sigma modulator with analog error cancellation logic and digital comb filter,” IEICE Trans. Electron., Vol. E96-C, No. 4, pp. 595-603, April 2013.
Guo-Ming Sung and Chih-Ping Yu, “Two-dimensional differential folded vertical Hall device fabricated on p-type substrate using CMOS technology,” IEEE Sensors Journal, Vol. 13, No. 6, pp. 2253-2262, June 2013.
Wen-Tzeng Huang, Ching-Kuo Wang, Guo-Ming Sung*, and Chiu-Ching Tuan, “Design and implementation of a low-cost scalar multiplier-on-chip for elliptic curve cryptosystem,” Applied Mechanics and Materials, Vol. 284-287, pp. 3395-3400, 2013.
Guo-Ming Sung, Ying-Tzu Lai, and Chien-Lin Lu, “CMOS bandgap reference and current reference with simplified start-up circuit,” International Journal of Energy Science. Vol. 2, Issue 6, pp. 247-254, Dec. 2012.
Guo-Ming Sung, Hsiao-Yuan Hsieh, and Chih-Ping Yu, “Mixed-signal transmitter chip with digital bridge and analogue front-end for XDSL in home networks,” IET Networks, pp. 1-8, Jan. 2012.
Chih-Ping Yu and Guo-Ming Sung, “Two-dimensional folded CMOS Hall device with interacting lateral magnetotransistor and magnetoresistor,” Sensors and Actuators, A, 182, pp. 6-15, May 2012.
Guo-Ming Sung, Chih-Ping Yu, Tsai-Wang Hung, and Hsiang-Yuan Hsieh, “Mixed-mode chip implementation of digital space SVPWM with simplified-CPU and 12-bit 2.56 Ms/s switched-current delta-sigma ADC in motor drive,” IEEE Trans. on Power Electronics, Vol. 27, Issue 99, pp. 1-15, Feb. 2012.
Guo-Ming Sung, Wei-Yu Wang, and Hsiang-Yuan Hsieh, “Chip implementation of digital scalar space-vector pulse width modulation for induction motor drive,” Electric Power Components and Systems, Vol. 39, pp. 1733-1747, Dec. 2011.
Guo-Ming Sung, Ying-Tsu Lai, and Chien-Lin Lu, “A resistor-compensation technique for CMOS bandgap and current reference with simplified start-up circuit,” IEICE Trans. Electron., Vol. E94-C, No. 4, pp. 670-673, April 2011.
Guo-Ming Sung and Hsiang-Yuan Hsieh, “A Novel Bridge Chip between an ATM and Ethernet,” IEEE Trans. on Consumer Electronics, Vol. 55, No. 3, pp. 1200-1207, August 2009.
宋國明、姚東安、陳克芳、方建翔,“交流馬達驅動器PWM控制晶片研製(III)”,Engineering Science & Technology Bulletin (工程科技),Vol. 90,pp.16-22,Feb. 2007。
方建翔、洪財旺、蔡孟伸、宋國明,“馬達空間向量脈波調變技術與類比數位轉換器之混波晶片設計”,電機月刊,Vol. 188,pp.154-169,August 2006。
林長緯、洪財旺、宋國明、譚旦旭,“馬達控制用之類比與數位混合積體電路設計”,電機月刊,Vol. 176,pp.192-207,August 2005。
G. M. Sung, “Error correction for transformed concave and convex MAGFETs with dc supply voltage,” Sens. Actuators A, 117, pp. 41-49., 2005.
G. M. Sung and S. I. Liu, “Error correction of transformed rectangular model of concave and convex MAGFETs with AC bias,” IEEE proc.-Circuits Devices Syst., Vol. 151, No. 6, pp.593-600, Dec. 2004.
G. M. Sung, “Interaction between magnetoresistor and magnetotransistor in the longitudinal and folded vertical Hall devices,” IEEE Sensors Journal, Vol. 4, No. 6, pp.749-758, Dec. 2004.
宋國明、楊偉昌、洪財旺、王勝雯,“直接轉矩控制專用晶片(ASIC)之設計與製作”,電機月刊,Vol. 164,pp.142-153,August 2004。
洪財旺、曾威倫、宋國明,“以標準單元式數位IC設計流程之空間向量調變IC設計”,機械月刊,vol. 339,pp.23-31,Oct. 2003。
G. M. Sung, J. F. Wei and S. I. Liu, “Three types of 2-D lateral magneto-resistive sensors with P+-implant confinement,” IEE Proceeding.-Circuits, Devices and System, Vol. 147, No. 3, pp. 158-164, June 2000.
S. I. Liu, J. F. Wei and G. M. Sung, ”SPICE macro model of MAGFET and its applications,” IEEE Trans. Circuits Syst. II, Vol. 46, No. 4, pp. 370-375, 1999.
宋國明,“身心障礙者職業重建輔具展覽暨研討會紀要”,National Science Council Monthly, Vol. 27,No. 6,pp. 653-660,June 1999。
宋國明、鄭誠功,“科技幫助人類獲得新生-身心障礙者科技輔具推動概況”,National Science Council Monthly,Vol. 27,No. 6,pp. 647-652,June 1999。
宋國明,“國科會電機技術推動概況”,Power Electronics Technology,No. 46,pp. 108-126,August 1998。
宋國明,“醫療儀器技術發展規劃”,National Science Council Monthly,Vol. 25,No. 7,pp. 451-459,July 1997。
宋國明,“國科會電力技術推動概況”,Power Electronics Technology,No. 39,pp. 1-15,June 1998。
宋國明,“電力電子推動小組推動概況”,National Science Council Monthly,Vol. 24,No. 6,pp. 493-501,June 1996。
C. L. Tsai, W. H. Chang, T. K. Liu and G. M. Sung, “Ultrasonic effect on fracture repair and prostaglandin E2 production,” Chinese Journal of Physiology, 35(1), pp. 27-34, 1992.
C. L. Tsai, W. H. Chang, T. K. Liu and G. M. Sung, “Ultrasound can affect bone healing both locally and systemically,” Chinese Journal of Physiology, 34(2), pp. 213-222, 1991.