基於感測器訊號的機械手臂振動抑制和預防性維護之研究 ，112/07/01~115/06/30，台達電子工業股份有限公司 

控制器核心與加值技術開發，111/11/01~114/10/31，新代科技股份有限公司

開發機器手臂CAM系統、動態建模與空間精度校正技術之研究，111/08/01~114/07/31，國科會

虛實整合加工紋路診斷，111/10/01~114/03/31，東台精機股份有限公司

CNC高速高精控制暨虛實加工系統整合，110/08/01~113/07/31，台達電子工業股份有限公司

整合嵌入式AI晶片與先進CNC控制器之系統設計與研發，111/06/01~113/05/31，國科會

結合邊緣運算與數位孿生之五軸工具機智能化技術研發，110/06/01~113/05/31，國科會

伺服沖床力量控制優化，111/12/01~112/11/30，金豐機器工業股份有限公司

應用持續學習技術於機台熱變形預測模型長效性提升，112/03/01~112/11/30，財團法人精密機械研究發展中心

製造業發展可預測技術前置基礎報告-以金屬製品製造及其設備相關技術領域為例，112/02/01~112/09/30，財團法人精密機械研究發展中心

五軸工具機精度量測與補償技術開發，111/10/01~112/09/30，公準精密工業股份有限公司

111年度智慧製造跨領域整合人才培育辦公室計畫，111/04/01~112/03/31，教育部

機械手臂CAM技術開發，109/03/01~112/02/28，上銀科技股份有限公司

工具機進給軸熱變位修模技術之開發與驗證，111/03/01~111/11/30，財團法人精密機械研究發展中心

基於邊緣計算之技術開發，108/11/01~111/10/31，新代科技股份有限公司

協助中小企業智慧應用升級計畫-學界智能化技術媒合座談活動，111/02/01~111/09/30，財團法人精密機械研究發展中心

定主軸負載下之適應性切削技術，110/01/01~111/09/30，友嘉實業股份有限公司

整合伺服系統服務，109/04/01~111/09/30，新代科技股份有限公司

BSG馬達與驅動器之設計與研發，108/08/01~111/07/31，嘉普科技股份有限公司

開發刀具磨耗與工件表面品質監控系統，108/08/01~111/07/31，科技部

機邊電腦管理與自動化建置，109/06/01~111/05/31，啟碁科技股份有限公司

110年度智慧製造跨域整合人才培育辦公室計畫，110/05/01~111/03/31，教育部

自動化學門研究發展及推動規劃小組計畫，108/01/01~110/12/31，科技部

應用適應性控制技術於工具機振動抑制之研究，110/03/01~110/11/30，財團法人工業技術研究院

結合機器學習演算法之工具機進給軸向熱變形推估研究，110/03/01~110/11/30，財團法人精密機械研究發展中心

以塑膠製品製造業暨其設備領域和製造業應用導入之人工智能技術為例，110/02/01~110/09/30，財團法人精密機械研究發展中心

虛實加工系統暨聯網智能化技術之研發，107/12/01~110/08/31，科技部

鍛造品質光學檢測模組設計製作與測試驗證，110/05/01~110/05/31，財團法人工業技術研究院

西門子通訊模組，110/02/24~110/05/31，財團法人工業技術研究院

自動化參數調校，110/01/01~110/05/31，高鋒工業股份有限公司

伺服沖床加工曲線優化設計，109/06/01~110/05/31，金豐機器工業股份有限公司

武器關鍵零件製造之智能化刀具診斷系統研究，109/06/01~110/05/27，國家中山科學研究院

109年度智慧製造產業創新提升人才培育辦公室計畫，109/04/01~110/04/30，教育部

工具機動態結構預測之技術於切削表面的影響與摩擦補償參數調整方法，109/02/01~110/02/01，大前科技股份有限公司

委託設計刀具磨耗檢測技術，109/09/03~109/11/30，財團法人工業技術研究院

智能化調機技術，109/09/01~109/11/30，精科智能股份有限公司

探討切削力對工具機伺服以及傳動精度之影響，109/03/01~109/11/30，財團法人工業技術研究院

人工智慧演算法於工具機熱變位，109/03/01~109/11/30，財團法人精密機械研究發展中心

反應押出智能模擬計算研究，109/04/01~109/11/30，財團法人工業技術研究院

機器手臂誤差補償，108/11/12~109/10/31，漢翔航空工業股份有限公司

學界智慧化升級技術能量盤點--以金屬製品製造業暨其設備領域為例，109/03/01~109/09/30，財團法人精密機械研究發展中心

工具機振動模態分析與加工動態特性研，108/07/01~109/06/30，永進機械工業股份有限公司

108年度智慧製造產業創新提升人才培育辦公室計畫，108/05/01~109/03/31，教育部

開發教導式機械手臂之法則，108/03/01~108/12/30，財團法人工業技術研究院

應用人工智慧技術於控制器參數最佳化之研究，108/03/01~108/11/30，財團法人工業技術研究院

結合振動訊號智能預測表面粗糙度之加工品質研究，108/03/01~108/11/30，財團法人精密機械研究發展中心

智能化插補與摩擦參數調校，107/11/01~108/10/31，程泰機械股份有限公司

工具機插補參數調校與加工動態分析，107/11/01~108/10/31，大前科技股份有限公司

開發具有EtherCAT介面之高效能工具機主軸馬達驅動器，106/08/01~108/07/31，科技部

Hong, M. Q. and M. S. Tsai*, 2024, Development of an adaptive Smith controller for cutting torque control in a milling process, Journal of Manufacturing Processes, Vol. 131, PP. 815-826. (SCI)

Li, H. M., C. K. Liu, Y. C. Yang and M. S. Tsai*, 2024, Simultaneous compensation of geometric and compliance errors for robotics with consideration of variable payload effects, Mechatronics, Vol. 102. (SCI) 

Jian, Z. W., C. C. Liu b, P. Y.Tang, M. S. Tsai*, 2023, Investigation of interaction between friction and elastic deformation by using a novel feed drive model, Mechatronics, Accepted. (SCI)

Li, H. M., M. S. Tsai*, T. H. Zhang, C. C. Cheng, 2023, Smooth Interpolation Design with Consideration of Corner Tolerance Constraints for Robotics. Applied Sciences, 13(15), 8789. (SCI)

Li, H.-M.,M. S. Tsai*, C. C. Cheng, 2023, Short line segment interpolation by using velocity blending technology with high overlapping time. Journal of Manufacturing Processes, 101,512–526 (SCI)

Liu* D. S, J. C. Lu, M. S. Tsai, C. T. Wu and Z. W. Zhuang, 2022, Development of a Novel Dynamic Modeling Approach for a Three-Axis Machine Tool in Mechatronic Integration, Machines, vol. 10, 1102, https://doi.org/10.3390/machines10111102.

Tang, P. Y., M. T. Lin*, and M. S. Tsai, 2022, Real-time master-based feedrate scheduling with kinematic constraints for five-axis machining, The International Journal of Advanced Manufacturing Technology, Vol. 123, pp. 493–510.

Tang, P. Y., M. T. Lin, M. S. Tsai*, C. C. Cheng, 2022, Toolpath Interpolation with Novel Corner Smoothing Technique, Robotics and Computer-Integrated Manufacturing, Vol. 78, 102388,

Tseng H. C., M. S. Tsai , C. C. Cheng, and Li, C. J., 2021 Optimization of Computer Numerical Control Interpolation Parameters Using a Backpropagation Neural Network and Genetic Algorithm with Consideration of Corner Vibrations, Applied Sciences, Vol. 11(4), 1665, https://doi.org/10.3390/app11041665. (SCI)

Liu, C. C., M. S. Tsai, M. Q. Hong and P. Y., Tang, 2020, Development of a Novel Tuning Approach of the Notch Filter of the Servo Feed Drive System, Journal of Manufacturing and Materials Processing, Vol. 4, no. 1, pp. 21. (SCI)

Li, C. J., H. C. Tseng, M. S. Tsai, C. C. Cheng, Novel servo-feed-drive model considering cutting force and structural effects in milling to predict servo dynamic behaviors, 2020, The International Journal of Advanced Manufacturing Technology, Vol. 107, 2037 (SCI).

Liu, C. C. Tsai, M. S. Lin, M. T. and Tang P. Y., 2020, Novel multi-square-pulse compensation algorithm for reducing quadrant protrusion by injecting signal with optimal waveform, Mechanism and Machine Theory, Vol. 150, pp. 103875-103890, 2020 (SCI)

Liu, C. C., Tsai, M. S., Cheng, C. C., 2019, Development of a novel transmission engaging model for characterizing the friction behavior of a feed drive system, Mechanism and Machine Theory, Vol. 134, April, pp. 425-439, (SCI).

Chang, Y. H., Liu, C. S., Chen, I. W., Tsai, M. S. and Tseng, H. C., 2019 Open-loop control of voice coil motor with magnetic restoring force using high-low frequency composite signals, IEEE Access, vol. 7, pp. 146258-146263 (SCI).

Huang, H. W., Tsai, M. S., Huang, Y. C., 2018, Modeling and Elastic Deformation Compensation of Flexural Feed Drive System, International Journal of Machine Tools and Manufacture, Vol. 132, pp. 96-112. (SCI)

Huang, T. Y., Tsai M. S., M. T. Lin, C. C. Cheng, 2018, Novel dynamic modeling of feed drive system using subspace method, Vol. 12, issue 5, pp. 385-400, Journal of the Chinese Institute of Engineers. (SCI)

Wu, S. K. Tsai, M. S., M. T. Lin and H. W. Huang, 2018, Development of Novel Tool Center Point Velocity Planning Algorithm for Five Axis Machine Tool, International Journal of Precision Engineering and Manufacturing, Vol. 19, Issue 8, pp 1187–1199.

Huang, H. W. and M. S. Tsai, 2018, Robust feedrate control for high-efficiency machining using quantitative feedback theory, Journal of the Chinese Institute of Engineers, Vol. 41, Issue 7, pp. 566-578. (SCI)

Lin, M. T., T. Y. Huang, M. S. Tsai, and S. K. Wu, 2017, Virtual simulation of 5 axis machine tool with consideration of CNC interpolation, servo dynamics, friction, and geometric errors, Journal of the Chinese Institute of Engineers, Vol. 40, issue 7-special issue on industry 4.0, pp. 626-637 (SCI).

Tsai, M. S., Y. C. Huang, M. T. Lin, S. K. Wu, 2017, Integration of input shaping technique with interpolation for vibration suppression of servo-feed drive system, Journal of the Chinese Institute of Engineers, Vol. 40, issue4.pp.285-295. http://dx.doi.org/10.1080/02533839.2017.1314197 (SCI).

Tsai, M. S. and Y. C. Huang, 2016, A novel integrated dynamic acceleration/deceleration interpolation algorithm for a CNC controller, International Journal of Advanced Manufacturing Technology, October, Vol. 87, Issue 1, pp 279–292. (SCI)

Tsai, M. S., and Y. S. Sun, 2015, "Robust control of pendulum-type micro-vibration isolation system", Journal of Vibroengineering, Vol. 17, Issue 5, pp. 2410-2421. (SCI)

Yuan, W. H. and M. S. Tsai, 2014, "A Novel Approach for Forward Dynamic Analysis of 3-PRS Parallel Manipulator with Consideration of Friction Effect", Robotics and Computer Integrated Manufacturing, Vol. 30, pp. 315-325. (EI, SCI)

Tsai, M. S., Y. S. Sun and Z. H. Wu, 2013, "Development and Control of Novel Vibration Isolation Platform", International Journal of Automation and Smart Technology, Vol. 3, No. 4, pp. 245-250.

Lin, M. T., C. L. Yen, M. S. Tsai, and H. T. Yau, 2013, “Application of Robust Iterative Learning Algorithm in Motion Control System,” Mechatronics, Vol. 23, No. 5, pp. 530-540. (EI, SCI)

Tsai, M. S, C. L. Yen and H. T. Yau, 2013, “Integration of Empirical Mode Decomposition Algorithm with Iterative Learning Control for High Precision Machining”, IEEE/ASME Transactions on Mechatronics, Vol. 18, No. 3, pp. 878-886. (EI, SCI)

Tsai, M. S, S. K. Chen, 2011, “Analysis of High-Speed Railway Vehicle Trucks with Worn and Eccentric Wheelset Moving on Curved Tracks”, Journal of the Chinese Society of Mechanical Engineers, Vol.32, Issue 4, pp. P331 - 340, (SCI Expanded)

Tsai, M. S., H. W. Nien, and H. T. Yau, 2011, “Development of integrated acceleration/deceleration look-ahead interpolation technique for multi-blocks NURBS curves”, International Journal of Advanced Manufacturing Technology, Vol. 56, Issue 5, pp. 601-618, (EI, SCI).

Tsai, M. S., and W. H. Yuan, 2011, “Dynamic modeling and Decentralized Control of a 3 PRS Parallel Mechanism Based on Constrained Robotic Analysis,” Journal of Intelligent and Robotic Systems, Vol. 63, No. 3-4, pp. 525-545, (EI, SCI).

Tsai, M. S., Y. S. Sun, and C. H. Liu, 2011, “Robust Control of Novel Pendulum-type Vibration Isolation System”, Journal of Sound and Vibration, Vol. 330, pp. 4384-4398. (EI, SCI).

Tsai, M. S., and J. T. Jeng, 2011, “Development of the Generalized Model to Analyze Time and Frequency Responses for SAW Sensors”, Smart Materials and Structures, Vol. 20, pp.1-14. (EI, SCI)

Tsai, M. S., S. H. You, and J. T. Jeng, 2011, “Robust Control of a high-precision positioning stage Using an integrated H∞ and QFT Controller”, Journal of Intelligent Material Systems and Structures, Vol. 22, March, pp. 421-433 (EI, SCI).

Tsai, M. S. C. L. Yen and H. T. Yau, 2011, “Development of a Hybrid Iterative Learning Control for Contouring NURBS Curves”, Asian Journal of Control., Vol. 13, No. 1, pp. 1-19. (EI, SCI)

Tsai, M. S. and W. H. Yuan, 2010, “Joint Space Formulation of a Novel Decoupled Dynamic Model for 3-PRS mechanism”, Journal of the Chinese Society of Mechanical Engineers, Vol.31, No.6, pp. 465~475. (EI, SCI Expanded)

Tsai, M. S., and W. H. Yuan, 2010, “Inverse dynamics analysis for a 3 PRS parallel mechanism based on a special decomposition of the reaction forces”, Mechanism and Machine Theory, Vol. 45, Issue 11, pp. 1491-1508. (EI, SCI)

Tsai, M. S., and Jie-Ting Jeng, 2010, “Development of a generalized model for analyzing phase characteristics of SAW devices under mass and fluid loading”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 57, No. 11, pp. 2550-2563. (EI, SCI)

Tsai, M. S., Nien, H. W., and Yau, H. T., 2010, “Development of a Real-time Look-ahead Interpolation Methodology with Spline Fitting Technique for High-speed Machining”, International Journal of Advanced Manufacturing Technology, Vol. 47, pp. 621-638. (EI, SCI)

Liu, C. K., H. M. Li, M. S. Tsai, 2024, Precision Compensation for Geometric and Compliance Errors of Robot Manipulator using a Novel Algorithm , The 21th International Conference on Automation Techology. 

Jhuang, J. P., M. S. Tsai, Y. S. Lin, T. H. Zheng, Z. W. Jian, J. H. Jian, 2024, A noval approach to CNC controller paramter optimization by intergrating deep learning model with particle swarm optimization, The 13th International Conference on Mechanics and Industrial Engineering (ICMIE'24). 

Liu, C. K., H. M. Li, M. S. Tsai, M. Q. Hong and J. H. Jian, 2024, Two Stage Identification of Robotic Dynamic Parameters with the LuGre Friction Model using Improved Grey Wolf Optimizer Method, The IEEE International Conference on Advanced Robotics and Mechatronics. 

Jhuang, J. P., M. S. Tsai, S. C. Chang, Y. S. Lin, 2023, Tool condition monitoring using sensor fusions with ensemble SVM and AlexNet, The 20th International Conference on Automation Techology. 

Cheng, K. H. Cheng, M. S. Tsai, H. M. Li, M. Q. Hong, 2023. Estimation of Natural Frequencies for robotics at different postures using particle swarm optimization and Rayleigh quotient. The 29th International Congress on Sound and Vibration.

Hung, C. H., M. S. Tsai, M. Q. Hong, Y. H. Wang, W. F. Chen, 2022, Thermal Error Prediction of Ball Screws Based on Partial Least Square Method with Consideration of Friction Works, 2022，25th International Conference on Mechatronics Technology (ICMT)

李鴻明、鄭凱䔗、蔡孟勳，麥朝創，2022，應用適應性命令整形技術於機器手臂振動抑制之研究，中國機械工程學會第三十八屆全國學術研討會

Y. S. Lin, M. S. Tsai*, 2021, Online Detection of Tool Wear Using U-Net Segmentation Network, The 18th International Conference on Automation Technology.

B. C. Yeh, M. S. Tsai, K. M. Li, H. C. Tseng, H. S. Yang, C. L. Chou, 2020, Analysis of tool runout and wear based on bending moment model induced by cutting force in milling, The 17th International Conference on Automation Technology.

吳政祐、 蔡孟勳、 曾翔駿、劉崇慶、麥朝創，2020，銑削加工之切削力係數鑑別，中國機械工程學會第三十七屆全國學術研討會

M. Q. Hong, M. S. Tsai, Y. S. Lu, 2019, Thermal Displacement Prediction of Machine Tool Spindle by Neural Network Model, The 8th International Conference of the Asian Society for Precision Engineering and Nanotechnology (Best paper award).

C. C. Cheng, Y. S. Chiu, M. S. Tsai, Y. T. Chen, and C. H. Liu, 2019, Natural Frequency Identifications of Spindle-Tool System of Machine Tools during Machining, The 2019 EMI International Conference.

黃垣淇、蔡孟勳、鄭志鈞、周家駿，2019，基於考量轉速和定子電流下之感應馬達最佳化效率研究，中國機械工程學會第三十六屆全國學術研討會論文集

Tseng H.C., Tsai M.S., Cheng C.C., Mai C.C., 2019, Optimization of CNC Interpolation Considering Vibrations based on Neural Networks, 中國機械工程學會第三十六屆全國學術研討會論文集。

Wu, Y. C., M. S. Tsai, P. Y. Tang, and C. K. Ho, 2018, Novel Interpolation Design using Corner Smoothing Technique for Five-Axis Tool Center Point Path Generation, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Auckland, New Zealand

Tsai M. S., H. C. Tseng, S. S. Yang S. S. and C. L. Chou, Optimization of CNC interpolation parameter using Artificial Intelligent Techniques, International conference on advanced manufacturing (Best paper award)

Hwang, Y. J. , M. S. Tsai, T. Y. Hwang, H. W. Hwang, 2017, Novel interpolation design using input shaping technique, 2017全國製造研討會

Huang Hong-Wei, Meng-Shiun Tsai*, Mao-Qi Hong, Teng-Yi Huang, Shin-Sheng Yang, 2017, Robust Feedrate Control for High Efficiency Milling Process, 2017 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Munich, Germany.

Tsai, M. S., Y. C. Huang, C. Y. Chen, and C. S. Liu, 2016, Vibration Suppression of Feed Drive system for Machine Tool using Shaping Technique, The 23rd International Congress on Sound & Vibration.

Hsiang-Chun Tseng, Yung-Chou Kao, Meng-Shiun Tsai, Yi-Hung, Lu, and Chi-Wei, Huang, 2016, Networking with CNC Machine Tools Based on Open Platform Communications Unified Architecture, The 5th International Conference on Virtual Machining Process Technology (VMPT 2016)

Tsai, M. S. and Hong-Wei Huang, 2016, Integrated Input Shaping with Interpolator for CNC Machine Tools, 2016 IEEE International Conference on Advanced Intelligent Mechatronics

Tsai, M. S. and Y. S. Sun, 2015, Robust Control of Pendulum-typed Micro-Vibration Isolation System, 2015 International Multi-Conference on Engineering and Technology Innovation

Tsai, M. S., P. Y. Tang, and C. Y. Lee, 2015, Application of Spline Fitting Techniqueon Interpolation Design for Corner Rounding, Proceedings of 2015 IFToMM World Congress

Tsai, M. S. and Shu-Jui Chiu, Chung-Ching Liu and Pu-Yang Tang, 2015, Analysis of Dynamic and Suppression of Vibrations for the Feed Drive System, IEEE International Conference on Automation Science and Engineering (IEEE CASE)

Tsai, M. S. and Y. C. Huang, 2015, Development of Advanced CNC Interpolation algorithm with consideration of command and dynamic errors, ASME 2015 International Design Engineering Technical Conferences

Tsai, M. S. S. K. Wu, and H. W. Huang, 2014, Study on Acceleration/Deceleration Feedrate Planning for Multi-block Line Segments using Estimated Contour Error Formulation, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

Tsai, M. S., Y. C. Huang, C. Y. Lee, 2014, An integrated acceleration/deceleration interpolation algorithm for high speed machining, International Conference on Advanced Manufacturing.

Tsai, M. S., W. H. Yuan, H. W. Huang, and C. C. Liu, 2013, Monitoring of Friction Condition Using a Novel System Identification Technique, International Workshop on Structural Health Monitoring.

Tsai, M. S., C. L. Yen and H. T. Yau, 2012, Development of Robust Iterative Control and Application to Motion Control, ICINCO, Ninth International Conference on Informatics in Control, Automation, and Robotics.

Tsai, M. S. and H. W. Huang, Robust Control of Adaptive Cutting for High Efficiency Machinery, International Conference on Advanced Manufacturing, 2012

Tsai, Meng-Shiun, Chung-Liang Yen and Hong-Tzong, 2011, Development of a Novel Iterative Learning Control Algorithm using Empirical Mode Decomposition Technique, IEEE International Confernce on Mechatronics and Automation

Tsai, Meng-Shiun, Wei-Hsiung Yuan, 2011, Robust Decentralized Joint Control of a 3-PRS Parallel Mechanism Based on a Simplified Model, The 23rd Chinese Control and Decision Conference

Tsai, Meng-Shiun, Jie-Ting Jeng, 2010, “Investigation of Dynamic Characteristics for SAW Pressure Sensor, 中國機械工程學會第廿七屆學術研討會。

Tsai, Meng-Shiun, Wei-Hsiung Yuan, 2010, “Dynamic modeling and analysis of a 3 PRS Parallel Mechanism using constrained robotic Approach”, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010.

蔡孟勳, 顏仲良，2010, 發展強健式反覆學習法則於運動控制之研究，第八屆海峽兩岸製造技術研討會

蔡孟勳、洪健翔、洪茂棋、李玟昀、陳威任， 2023, 工具機進給軸熱變位預測與修模技術開發。機械新刊(切削加工與刀具專欄)，Vol. 8。 

蔡孟勳，2021，CNC控制器與數位孿位孿生。機械工業雜誌(領袖觀點)，Vol. 456, pp. 2-4。

蔡孟勳，莊健平，麥朝創，2020，應用 AI 影像技術於刀具紋路之分類，Vol. 444, pp. 13-16.

蔡孟勳，林俊佑，連震杰，麥朝創，2019，應用影像疊圖技術之刀具磨耗檢測，機械工業雜誌，Vol. 432, pp. 54-58.

盧亦軒，劉德葳，洪茂棋，蔡孟勳，2019，工具機主軸熱變位預測技術，科儀新知, Vol. 221, pp 56-70

劉德葳，蔡孟勳，張宜彬，王仁傑，2018，建構智慧機械聯網平台技術，機械工業雜誌，Vol. 428, pp. 18-26.

蔡孟勳，黃泓緯，麥朝創,，2017，應用強健性進給率控制於高效率加工, 機械工業雜誌，vol. 416, pp. 7-13。

蔡孟勳，曾翔駿，洪茂棋，2016，CNC智能化人機介面開發, 機械工業雜誌，Vol. 404, pp. 49-58 。

蔡孟勳，2016，控制器在工業4.0扮演的角色，機械月刊，Vol. 42, no. 7, pp. 89-97。

蔡孟勳，周家駿，吳明政，黃仁樹，莊易霖，陳文瑞，2015，感應馬達最大化加速度與最佳化效率之研究，機械工業雜誌，Vol. 392, p2-22。

唐溥陽，蔡孟勳，李建毅，2014，應用曲線擬合技術於轉角線段之插補器設計，機械工業雜誌，Vol. 380, 頁27-47。

蔡孟勳等人，2013，工具機控制器原理與實務，五南圖書出版公司。

蔡孟勳，羅任添，粘濠偉，李建毅，2013，工業用串列通訊介紹-以EtherCAT協定為例，機械工業雜誌，Vol. 368, 頁1-14。

蔡孟勳，吳明政，涂堂釗，2013, 智慧感應馬達驅動與控制技術研究, 機械零組件通報，卷 31，頁3-9。

蔡孟勳，陳慶儒，2013，泛用運動控制平台開發與應用, 機械工業雜誌，卷期:360，頁111-129。

蔡孟勳，林明宗，吳仕凱, 2012, 五軸工具機靜動態誤差分析與路徑規劃演算法之實現，機械工業卷期: 349，頁109-123。

蔡孟勳，袁偉翔，顏仲良，2012，傳動系統動態模型之建立與分析，機械月刊2012年9月號。

吳翔有，蔡孟勳，2011結合 EtherCAT 工業網路界面與DSP 控制器之系統研發，機械零組件通報，卷21。

潘文珏，蔡孟勳，陳贊宇，2011，TFT-LCD真空壓合精密對位系統，電子月刊卷期:17:5=190，頁82-92。

蔡孟勳，2010，應用滑動模式估測器於永磁同步馬達之無感測器向量控制, 機械零組件通報，卷13，頁12-13。

適應性凹陷濾波器減振控制裝置，發明第I561957號，自2016年12月11日至2034年11月11日

進給系統的撓性變形補償方法，發明第I551966號，自2016年10月01日至2035年12月17日

混合型軸向運動控制器及其控制方法，發明第I403870號，自2013年8月1日至2029年9月23日止

低應力拋光裝置「Low-stress polishing device」，US7,695,351B2，自2010年4月13日至2028年2月21日

低應力拋光裝置，發明第I322745號，自2010年4月1日至2027年5月16日