Accessory Shield

引導：

這個模組有LCD顯示器，溫溼度感應器；輸入裝置還有可變電阻與按鈕，另外有一個彩色LED、蜂鳴器及繼電器作為輸出。

想想可以做甚麼?

一、讓LED閃爍不同的顏色。

二、用多向按鈕調整改變LED顏色。

三、用可變電阻改變蜂鳴器音階。

四、用LCD顯示短句。

五、用LCD顯示溫溼度。

六、用LCD顯示時間。

七、還可以做那些創新?

Accessory Shield V1.0 https://wiki.dfrobot.com/Accessory_Shield_for_Arduino_SKU_DFR0270

========================================================================================

BLUNO Accessory shield Demo

TUTORIALS

In this Article, you can use the BLUNO to connect with the mobile device and Accessory shield to show the demo.

Tools needed

• BLUNO ×1

• Android 4.3+ Devices with BLE or IOS 7.0+ Devices

• Accessory Shield with Arduino ×1

• Micro USB cable x1

Software Package On Github

• Bluno Accessory Shield Demo all in one

Step by Step

1. If you stuck in any of the following process, Go Trouble Shooting section below

2. Install the Arduino IDE. (Arduino 1.0.x or Arduino 1.5.x)

3. Download and open the INO file with Arduino

4. Install the PlainProtocol (PlainProtocol Ver1.1 reference) , U8glib (U8glib reference) and BlunoAccessory Library. (Tutorial for installing library).

5. Select the "Arduino Uno" as the target board in menu->Tools->Board. 6. Upload the Sketch.

電路圖https://image.dfrobot.com/image/data/DFR0270/Accessory%20shield%20sch.pdf