與keyestudio Multi-purpose Shield V1 相同
1. Introduction
Multi-purpose Shield V1 is a learning board based on Arduino.
No need for soldering and connection.
Download directly the program to complete experiment.
It is multi-purpose and we offer code libraries of all modules that have been tested.
You can use them directly.
There are extended ports on the shield to help you to complete other experiment.
2. Features
1.Compatible with main controller on the market,such as UNO R3 and MEGA2560
2.Using two-channel LED indicator to show the working condition of program for modulating program conveniently
3.Completing external interrupt experiment by two-channel keyswitch
4.One reset button
5.Measuring temperature and humidity with DHT11 temperature and humidity sensor module
6.Using revolving potentiometer to do analog input
7.Alarming and making sound by passive buzzer module
8.Full-color LED
9.Utilizing photovaristor to detect the brightness of light
10.Do temperature measuring experiment with LM35D temperature sensor
11.Detecting infrared receiving by infrared receiver
12.2-channel digital port(D7.D8)
13.1-channel analog port(A3)
14.One IIC interface
15.One TTL serial port
3. Connection Diagram
Upload program to keyestudio UNO R3 BOARD, and plug this shield into UNO R3 BOARD(as the below picture).
元件腳位規劃如下:
D0:預留RX使用(可外接藍芽)
D1:預留TX使用(可外接藍芽)
D2:按键模組 SW1
D3:按键模組 SW2
D4:DHT11温濕度傳感器模組
D5:蜂鳴器模組
D6:紅外線接收器模組
D7:預留腳位(已接出杜邦接頭)
D8:預留腳位(已接出杜邦接頭)
D9:RGB三色LED模組
D10:RGB三色LED模組
D11:RGB三色LED模組
D12:紅色LED模組
D13:藍色LED模組
A0:旋轉電位器模組
A1:光敏電阻模組
A2:LM35温度傳感器模組
A3:預留腳位(已接出杜邦接頭)
A4:預留I2C模組腳位(SDA已接出杜邦接頭) 在 SW1上面
A5:預留I2C模組腳位(SCL已接出杜邦接頭) 在 SW1上面
Compatible with main controllers such as UNO R3 and MEGA2560.
Comes with 2 LED indicators to show the program status.
Comes with 2 switches for external interrupt experiment.
Comes with a reset button
Comes with DHT11 sensor for measuring temperature and humidity.
Comes with a potentiometer for analog input
Comes with a passive buzzer for alarm.
Comes with a full-color RGB LED
Comes with a photocell to detect the brightness of light
Comes with LM35D temperature sensor
Comes with an infrared receiver
2digital pins(D7 and D8)
1 analog pin(A3)
One IIC interface(A4 SDA, A5 SCL)
One TTL serial pin