(Click on the pictures to enlarge)

Telescope Adapter:

A friend of mine bought a telescope and wanted to use it on a tripod with different mount type. We developed an adapter to allow the telescope (Dovetail Vixen) be attached to the tripod (EQ1).

TelescopeAdapter.stl

Sharpener Base:

The sharpener below is supposed to be used by rolling the knife over it on a flat surface, like a table. Just did a base to it.

axis.stl (print 2 units and glue to the sharpner with epoxy glue (araldite).

sharpenerBase.stl

3D Printer Cable Holders:

I had a bad surprise when some wires from the 3D printer head touched the noozle and melted due to the heat. So I decided develop some holders to organize the cables and hold them tight on both bed and print head.

CableHolder1.stl

CableHolder2.stl

Shower Holder:

A shower holder to replace the original (the first pic below) that broke.

ShowerHolder.stl

Pin.stl

Automatic pencil cap:

Just another repair, like in Automatic Pencil Clip ...