Ahmadi, M., Dutta, T., & Mukherjee, M. (2024). Scalable narrow linewidth high power laser for barium ion optical qubits. Optics Express, 32(10), 17879-17892. Link
Ahmadi, M., Abrari, M., Ghanaatshoar, M., & Khalafi, A. (2024). A novel algorithm for maximum power point tracking using computer vision (CVMPPT). Plos one, 19(4), e0301363. Link
Ahmadi, M., Abrari, M. & Ghanaatshoar, M. (2021) An all-sputtered photovoltaic ultraviolet photodetector based on co-doped CuCrO2 and Al-doped ZnO heterojunction. Nature Scientific Reports 11, 18694. Link
Ahmadi, M., Anaghizi, S. J., Asemi, M., & Ghanaatshoar, M. (2021). Plasma-treated room temperature synthesized CuCrO2/Au/CuCrO2 on Polyethylene terephthalate: Towards a high-performance flexible p-type transparent conductor. Thin Solid Films, 723, 138582. Link
Ahmadi, M., Asemi, M., & Ghanaatshoar, M. (2018). Mg and N co-doped CuCrO2: A record-breaking p-type TCO. Applied Physics Letters, 113(24), 242101. Link
Ahmadi, M., Asemi, M., & Ghanaatshoar, M. (2018). Improving the electrical and optical properties of CuCrO2 thin film deposited by reactive RF magnetron sputtering in controlled N2/Ar atmosphere. Applied Physics A, 124(8), 1-8. Link
Sharifi Malvajerdi et al. (2021). High-Voltage, High-Current Electrical Switching Discharge Synthesis of ZnO Nanorods: A New Method toward Rapid and Highly Tunable Synthesis of Oxide Semiconductors in Open Air and Water for Optoelectronic Applications. ACS Applied Materials & Interfaces, 13(39), 46951-46966. Link
Abrari, M., Ahmadi, M., Chenari, H. M., & Ghanaatshoar, M. (2024). Investigating the effect of ZrO2 nanofibers in ZnO-based photoanodes to increase dye-sensitized solar cells (DSSC) efficiency: Inspecting the porosity and charge transfer properties in ZnO/ZrO2 nanocomposite photoanode. Optical Materials, 147, 114690. Link
Arkani, R., Habibi, H., Ahmadi, M., Ghanaatshoar, M., & Pouya, R. (2022). Performance improvement of thin-film solar cells using 1D photonic structures optimized by genetic algorithm. Applied Solar Energy, 58(5), 601-608. Link
Najafabadi, H. A., Ahmadi, M., & Ghanaatshoar, M. (2021). The influence of radio-frequency sputtered blocking layer on boosting the performance of BaSnO3-based dye-sensitized solar cell. Thin Solid Films, 717, 138346. Link
Abrari, M., Ahmadi, M., Ghanaatshoar, M., Moazami, H. R., & Davarani, S. S. H. (2019). Fabrication of dye-sensitized solar cells based on SnO2/ZnO composite nanostructures: A new facile method using dual anodic dissolution. Journal of Alloys and Compounds, 784, 1036-1046. Link
Asemi, M., Ahmadi, M., & Ghanaatshoar, M. (2018). Preparation of highly conducting Al-doped ZnO target by vacuum heat-treatment for thin film solar cell applications. Ceramics International, 44(11), 12862-12868. Link
Soltanmohammadi, M., Karimi, V., Alee, S., Abrari, M., Ahmadi, M., & Ghanaatshoar, M. (2021). Cu2ZnSnS4 thin film as a counter electrode in zinc stannate-based dye-sensitized solar cells. Semiconductor Science and Technology, 36(10), 105008. Link
Ataie, S. A., Soltanieh, M., Naghizadeh, R., Ahmadi, M., & Ghanaatshoar, M. (2020). Effects of substrate temperature and reactive gas flow rate on the crystalline ceramic phases formation and tribological properties of W–Ti–Co–C–N thin films produced by co-sputtering. Ceramics International, 46(18), 29137-29149. Link
Moradi, A., Abrari, M., & Ahmadi, M. (2020). Efficiency enhancement in dye-sensitized solar cells through the decoration of electro-spun TiO2 nanofibers with Ag nanoparticles. Journal of Materials Science: Materials in Electronics, 31(19), 16759-16768. Link
Saeidi, M., Abrari, M., & Ahmadi, M. (2019). Fabrication of dye-sensitized solar cell based on mixed tin and zinc oxide nanoparticles. Applied Physics A, 125(6), 1-9. Link
Mohammadnejad, S., Khalafi, A., & Ahmadi, S. M. (2016). Mathematical analysis of total-cross-tied photovoltaic array under partial shading condition and its comparison with other configurations. Solar energy, 133, 501-511. Link
Improved waveguide surface roughness by foundry-processing techniques for enhanced light delivery to integrated ion trap for quantum computing platforms, Optical Interconnects XXIV, SPIE Photonics West 2024, San Fransisco, United States. Link
Q-factor improvement of surface ion trap fabrication, Quantum Computing, Communication, and Simulation IV, SPIE Photonics West 2024, San Fransisco, United States. Link
Process Development and Integration on Si Substrate for Ion trap-based Quantum Processors, 2023 IEEE 25th Electronics Packaging Technology Conference (EPTC), Singapore, Singapore. Link
Fabrication of ZnO-based UV photodetector by arc discharge deposition of ZnO nanorods, The 9th Asia-Pacific Workshop on Widegap Semiconductors, Okinawa, Japan. Link
Preparation of quaternary Cu2ZnSnS4 (CZTS) absorber layer through DC sputtering of Cu, Zn, and Sn metallic targets and post-deposition sulfurization, The 26th Iranian Conference on Optics and Photonics (ICOP 2020), Kharazmi University, Karaj, Iran. Link
Improving the properties of Zn2SnO4:Mn using vacuum annealing, The 9th Iran national vacuum conference, Isfahan University of Technology, Isfahan, Iran. Link
Fabrication of p-type transparent conducting oxide with high hardness for application as the protective anode in flat panel displays, Iranian Conference on Optics and Photonics, Shiraz University, Shiraz, Iran. Link
Performance of photovoltaic arrays with different configurations under partially shaded conditions, The 4th international Conference of IEA (Technology and Energy Management), Shahid Beheshti University, Tehran, Iran. Link
A New Ultra-Low Power High-Speed Dynamic Comparator, The 23rd Iranian Conference on Electrical Engineering, Sharif University of Technology, Link
Solar Energy, Engineering and Physics of Photovoltaics, Shahid Beheshti University Publications