Conference (Domestic & International)
Conference (Domestic & International)
Embedded Files
2025
2025
- Shahzaib Ali, 조대현, 변도영
"From Flakes to Patterns: MXene Inks for Printed Microelectronic Systems"
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- 최찬혁, Shahzaib Ali, 조대현, 변도영
"Al-rich MXene 합성과 공기 보조 전기 분무 공정을 이용한 코팅"
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- Brian Godwin, 조대현, 변도영
"Machine learning mapping of electrohydrodynamic parameters to enable printing of micro-dome structures using a single UV polymer ink."
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- Hamza Hussain, 조대현, 변도영
"Additive, Maskless Deposition of High-Viscosity Photoresists via Electrohydrodynamic Printing for Micronano Fabrication"
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- Kresna Budiman, 조대현, 변도영
"Hydrophobicity of Lubricant-Infused Sprayable Porous PDMS Structure Manufactured with Porogen Leaching Method"
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- Muhammad Abbas, Shahzaib Ali, 조대현, 변도영
"Synthesis and Characterization of Flexible Polymer-MXene (Ti3C2Tx) composite for electronics applications"
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- 이동윤, 조대현, 변도영
"스트레인 유도 전기 나노발전기(SIE-NG) 기반 자가발전 습도 센서"
Korean Society of Mechanical Engineering (KSME 2025), November, 2025
- 이승규, Shahzaib Ali, 조대현, 변도영
"Solvothermal Synthesis of Near-UV/Violet Emitting Ti3C2 MXene Quantum Dots"
The Korean Information Display Society(KIDS) / Society for Information Display(SID), October, 2025
- Shahzaib Ali, 변도영, 조대현
"Drop-on-Demand Printing on Nonplanar Surfaces via Machine Learning "
The Korean Society of Flexible Printed Electronics (KFPE), July, 2025
- Hamza Hussain, 조대현, 변도영
"Void-less full deposition of high aspect ratio through glass via electrohydrodynamic jet printing "
The Korean Society of Flexible Printed Electronics (KFPE), July, 2025
- Hamza Hussain, 조대현, 변도영
"Selective coating of high viscosity photoresist using electrohydrodynamic jet printing"
The Korean Society of Flexible Printed Electronics (KFPE), July, 2025
- Kresna Budiman, 변도영, 조대현
"Hydrophobicity of Porous PDMS Structure Manufactured with Solid Porogen Template Method"
KSME Micro-Nano Division, April, 2025
- 이동호, 손동기, 변도영, 조대현
"The analysis of jetting frequency of EHD jet printing depending on the ink properties"
KSME Micro-Nano Division, April, 2025
- 최찬혁, 변도영, 조대현
"Al-rich MXene synthesis and coating by electrospray deposition technique"
KSME Micro-Nano Division, April, 2025
- Hamza Hussain, 변도영, 조대현
"Electrohydrodynamic Jet Printing of High-Viscosity Photoresist for Semiconductor Applications"
KSME Micro-Nano Division , April, 2025
2024
2024
- Doyoung Byun
"High Precision Electrohydrodynamic Printing and Application to 2D Materials"
Innovative & Industrial 2D/Advanced Materials Summit & Expo (I2DM 2024), November, 2024
- Shahzaib Ali, Faisal Shahzad, Hassan A. Arafat*, Dae-Hyun Cho*, Doyoung Byun*
"Environmentally Stable Mxene Inks for Electrohydrodynamic Jet Printing of Micro-Electronics"
Innovative & Industrial 2D/Advanced Materials Summit & Expo (I2DM 2024), November, 2024
- 최찬혁, 강기호, 조대현, 변도영
"코어-쉘 구조 페로브스카이트 섬유의 습도 안정성 및 신축성 향상"
Korean Society of Mechanical Engineering (KSME 2024), November, 2024
- 이동호, 손동기, 조대현, 변도영
"작동조건 및 잉크 점도에 따른 테일러 콘 각도에 대한 실험적 연구"
Korean Society of Mechanical Engineering (KSME 2024), November, 2024
- Hamza Hussain, 조대현, 변도영
"Evaluation of Defect in Ag Through Glass via Formed by Electrohydrodynamic Printing Process"
Korean Society of Mechanical Engineering (KSME 2024), November, 2024
- 조대현, 문준경, 변도영, 이승기
"접촉계면에서의 변형에 의한 무마찰 대전 및 이를 이용한 나노발전기"
2024 Korean Tribology Society (KTS), October, 2024
- Shahzaib Ali, 변도영, 조대현
"전기수력학적 젯 프린팅을 이용한 MXene 기반 전극 소재 제조"
2024 Korean Tribology Society (KTS), October, 2024
- 이동호, 손동기, 조대현, 변도영
"잉크 물성에 따른 테일러 콘 발달과정에 대한 실험적 연구"
Korean Society of Visualization (KSV 2024), October, 2024
- 최찬혁, 강기호, 조대현, 변도영
"전기방사 공정을 활용한 신축성이 있는 페로브스카이트 양자점 색변환 필름 제작"
Korea Flexible & Printed Electronics Society (KFPE 2024), October, 2024
- Hamza Hussain, 조대현, 변도영
"Effect of Electrohydrodynamic Printing Conditions on Formation of Defects in Ag Through Glass Via"
Korea Flexible & Printed Electronics Society (KFPE 2024), October, 2024
- 최찬혁, 강기호, 조대현, 변도영
"Fabrication of core-shell structured MAPbBr3 nanofibers with enhanced water stability"
Interntional Meeting on Inforamtion Display 2024 (iMiD 2024), August, 2024
- 노재현, 이윤제, 서동주, 조정대, 변도영, 이창우
"Tension Control Schemes considering Thermal Behavior of Web in Roll-to-roll Continuous Processes"
Korean Society for Precision Engineering (KSPE 2024), May, 2024
- Hamza Hussain, 조대현, 변도영
Korean Microelectronic and Packaging Society (KMEPS 2024), April, 2024
2023
2023
- Hamza Hussain, 조대현, 변도영
"Void-Less Metallization of Through Glass Via (TGV) Using Inkjet Printing Process"
Korean Society of Mechanical Engineering (KSME 2023), November, 2023
- 이동호, 조대현, 변도영
"전반사 기반 구조색의 광학적 특성 해석"
Korean Society of Mechanical Engineering (KSME 2023), November, 2023
- Shahzaib Ali, Shaheer Mohiuddin Khalil, 조대현, 변도영
"Deflection of charged droplets for inkjet printing on vertical surfaces"
Korean Society of Mechanical Engineering (KSME 2023), November, 2023
- 임부시, Fariza Dian Prasetyo, Hadi Teguh Yudistira, Shaheer Mohiuddin Khalil, 조대현, 변도영
"Microlens fabrication using drop-on-demand electrohydrodynamic jet printing"
Korean Society of Mechanical Engineering (KSME) - Nano/Micro Division, May, 2023
- 문준경, 강기호, 임부시, 김지훈, 조대현, 변도영
"Direct writing of piezoelectric nanofiber for ocean current energy harvesting via electrohydrodynamic jet printing"
Korean Society of Mechanical Engineering (KSME) - Fluid Division, May, 2023
- 이동호, 조대현, 변도영
"전기수력학적 젯 프린팅을 활용한 마이크로 돔 제작 및 광학적 특성 분석"
Korean Society of Visualization (KSV) - Spring, April, 2023
- 임부시, 강기호, 문준경, 조대현, 변도영
"Transparent electrode fabrication by electrohydrodynamic jet printing and application to triboelectric nanogenerator"
LOPEC (Large-area, Organic & Printed Electronics Convention), March, 2023
- 문준경, 강기호, 임부시, 김지훈, 조대현, 변도영
"Direct writing of PVDF piezoelectric micromesh via electrohydrodynamic jet printing for piezoelectric energy harvesting"
LOPEC (Large-area, Organic & Printed Electronics Convention), March, 2023
2022
2022
- Hamza Hussain, 조대현, 변도영†
"Through Glass Via (TGV) Seed Layer Deposition Using Electrohydrodynamic Printing Process"
Korean Society of Visualization (KSV) - fall, December, 2022
- 이동호, 조대현, 변도영†
"Structural color fabrication using EHD printing and visualization"
Korean Society of Visualization (KSV) - fall, December, 2022
- 문준경, 강기호, 임부시, 김지훈, 조대현, 변도영†
"Experimental study of piezoelectric ocean current energy harvesting based on fluid-structure interaction"
Korean Society of Mechanical Engineering (KSME 2022), November, 2022
- 임부시, 조대현, 변도영†
"온도감응성을 보이는 액정 탄성중합체의 4차원 인쇄"
Korean Society of Mechanical Engineering (KSME 2022), November, 2022
- Shahzaib Ali, 임부시, Saeed Ahmed Khan, 조대현, 변도영†
"Fabrication and characterization of Ti3C2Tx and PAN-based porous conductive thin films"
Korean Society of Mechanical Engineering (KSME 2022), November, 2022
- Hamza Hussain, 조대현, 변도영†
"Metallization of Through Glass Via (TGV) Using Drop-on-Demand Electrohydrodynamic (EHD) printing"
Korean Society of Mechanical Engineering (KSME 2022), November, 2022
- Rizwan Ul Hassan, Saeed Ahmed Khan, 변도영†
"Parametric study of flexible solder bumps effect on underfill fluid flow in flip-chip packaging applications"
12th International Conference on Flexible and Printed Electronics 2022 (ICFPE), October, 2022
- 임부시, 강기호, 문준경, 조대현, 변도영†
"Evaluation of electrohydrodynamic jet printed Ag nanoparticle-based electrode for water droplet-driven triboelectric nanogenerator/solar cell hybrid system"
12th International Conference on Flexible and Printed Electronics 2022 (ICFPE), October, 2022
- 이강희, Shaheer Mohiuddin Khalil, 정재우, 변도영†
"The study of to optimize polymer-based membrane device's piezoelectric properties and performance"
12th International Conference on Flexible and Printed Electronics 2022 (ICFPE), October, 2022
- 임부시, 강기호, 문준경, 조대현, 변도영†
"Fabrication of triboelectric nanogenerator by silver nanoparticle-based ink for solar cell hybrid harvesting"
The 20th International Nanotech Symposium & Exhibition (NANO KOREA 2022) , July, 2022
- 이강희, Shaheer Mohiuddin Khalil, 정재우, 조대현, 변도영†
"The study of polymer-based piezoelectric materials to optimize piezoelectric properties of membrane devices"
The 20th International Nanotech Symposium & Exhibition (NANO KOREA 2022) , July, 2022
- 문준경, 강기호, 조대현, 변도영†
"Micro-pattern surface morphology changes with controlling polymer porous evaporation"
National Congress on Fluids Engineering (12NCFE), June, 2022
- 문준경, 강기호, 조대현, 변도영†
"Optimizing evaporation conditions for high-resolution perovskite pattern printing"
Korean Society of Visualization (KSV) - spring, May, 2022
- 임부시, 강기호, 문준경, 조대현, 변도영†
"빗방울을 이용한 발전을 위한 투명 마찰 전기 소자 개발"
Korean Society of Mechanical Engineering (KSME) - Nano/Micro Division, May, 2022
- 이강희, Shaheer Mohiuddin Khalil, 정재우, 조대현, 변도영†
"The study for increase the performance of Polymer-based piezoelectric membrane device"
Korean Society of Mechanical Engineering (KSME) - Nano/Micro Division, May, 2022
2021
2021
- Rizwan Ul Hassan, Shaheer Mohiuddin Khalil, 변도영†
"High-resolution electrohydrodynamic jet printing for transparent and flexible electronics"
Korea Flexible & Printed Electronics Society (KFPE 2021), December, 2021
- 강기호, 이형동, 황상연, 변도영†
"전기수력학적 젯 프린팅을 이용한 고유연성, 고 투과성 페로브스카이트-폴리머 패턴 제작"
Korea Flexible & Printed Electronics Society (KFPE 2021), December, 2021
- 임부시, 강기호, 조대현, 변도영†
"고투과성 마찰전기 발전소자 제작을 위한 미세 프린팅"
Korea Flexible & Printed Electronics Society (KFPE 2021), December, 2021
- 문준경, 강기호, 변도영†
"고해상도 페로브스카이트 프린팅 패턴을 위한 미세 구조 최적화"
Korean Society of Visualization (KSV) - fall, November, 2021
- 임부시, 강기호, 조대현, 변도영†
"액적의 충돌 면적과 마찰전기 발전소자 발젼량 관계 연구"
Korean Society of Visualization (KSV) - fall, November, 2021
- 강기호, 성백훈, 이형동, 변도영†
"공기/유체 계면의 바이오 템플릿을 이용한 실버 나노시트 제작에 관한 연구"
Korean Society of Mechanical Engineering (KSME 2021), November, 2021
- 임부시, 강기호, 조대현, 변도영†
"물방울 접촉 면적이 마찰전기 발전소자 성능에 미치는 영향"
Korean Society of Mechanical Engineering (KSME 2021), November, 2021
- 문준경, 강기호, 조대현, 변도영†
"수중 유연 압전소자 에너지 수확 장치 설계 연구"
Korean Society of Mechanical Engineering (KSME 2021), November, 2021
- Rizwan Ul Hassan, Shaheer Mohiuddin Khalil, 변도영†
"Electric field effect on the dynamics of viscous fluids flow between capillary slits"
Korean Society of Mechanical Engineering (KSME 2021), November, 2021
- 이강희, Shaheer Mohiuddin Khalil, 변도영†
"The basic study for optimization of PVDF membrane piezoelectric performance"
Korean Society of Mechanical Engineering (KSME 2021), November, 2021
- Shaheer Mohiuddin Khalil, Rizwan Ul Hassan, 변도영†
"Simulation study of meniscus interfacial charge by electrode positioning in a flat EHD nozzle system"
Korean Society of Mechanical Engineering (KSME 2021), November, 2021
- 강기호, 이형동, 문준경, 조대현, 변도영†
"Transparent and flexible perovskite-polymer composite patterning using electrohydrodynamic (EHD) jet printing"
The 19th International Nanotech Symposium & Exhibition (NANO KOREA 2021) , July, 2021
- 임부시, 강기호, 조대현, 변도영†
"Fabrication of a transparent and conductive Ag nanoparticle based electrode by electrohydrodynamic jet printing"
The 19th International Nanotech Symposium & Exhibition (NANO KOREA 2021) , July, 2021
- 문준경, 강기호. 조대현, 변도영†
"유연 압전 에너지 하베스팅 장치 유체-구조 상호작용 모델링"
Korean Society of Mechanical Engineering (KSME) - Fluid Division, May, 2021
- 임부시, 강기호, 조대현, 변도영†
"전기수력학적 젯 프린팅을 이용한 마찰 전기 소자의 투과도 향상"
Korean Society of Mechanical Engineering (KSME) - Nano/Micro Division, May, 2021
- 강기호, 이형동, 조대현, 변도영†
"전기수력학적 젯 프린팅을 이용한 페로브스카이트-폴리머 혼합 패터닝"
Korean Society of Mechanical Engineering (KSME) - Nano/Micro Division, May, 2021
2020
2020
- Shaheer Mohiuddin Khalil, Rizwan Ul Hassan, 이재현, 강기호, 변도영†
"Simulation study of electric field effect on under-fill velocity in a rectangular microchannel"
Korean Society of Mechanical Engineering (KSME 2020), December, 2020
- Rizwan Ul Hassan, 이재현, Shaheer Mohiuddin Khalil, 강기호, 조대현, 변도영†
"Experimental study of electric field effect on underfill viscous fluids between capillary slits"
Korean Society of Mechanical Engineering (KSME 2020), December, 2020
- 박선영, 강기호, 이재현, 조대현, 변도영†
"MoS2 나노플레이크/폴리이미드 복합체 기반의 마찰전기 나노발전기 성능 평가"
Korean Society of Mechanical Engineering (KSME 2020), December, 2020
- 임부시, 강기호, 조대현, 변도영†
"태양광 하이브리드 발전을 위한 마찰전기소자 연구"
Korean Society of Mechanical Engineering (KSME 2020), December, 2020
- 문준경, 강기호, 황상연, 조대현, 변도영†
"해조류 거동 모사 유연구조체 압전 에너지 수확장치 연구"
Korean Society of Mechanical Engineering (KSME 2020), December, 2020
- 강기호, 변도영†
"폴리머 다공성 구조 조절을 통한 미세 패턴의 표면 개질 연구"
Korean Society of Mechanical Engineering (KSME 2020), December, 2020
- 박선영, 변도영, 조대현†
"Application of MoS2 Nanoflakes Produced in Pure Water for a High-Performance Triboelectric Nanogenerator"
Beppu tribology conference, November, 2020
- Shaheer Mohiuddin Khalil, 이재현, 강기호, Rizwan Ul Hassan, 변도영†
"Simulation study of Maxwell stress effect on flow front in a micro-channel"
Korean Society of Visualization (KSV) - fall, November, 2020
- Rizwan Ul Hassan, 이재현, 변도영†
"Experimental study of surface wettability and electric field effect on liquid flow"
Korean Society of Visualization (KSV) - fall, November, 2020
- 문준경, 강기호, 우장미, 고한서, 변도영†
"Visualization of algae motion mimicking induced by fluid-structure interaction"
Korean Society of Visualization (KSV) - fall, November, 2020
- 박선영, 이재현, 강기호, 조대현, 변도영†
"Observation of changing work function of MoS2 and h-BN nanoflakes dispersed in pure water"
2020 Fall Meeting of The Korean Ceramic Society, November, 2020
- 임부시, 강기호, 조대현, 변도영†
"전기수력학적 젯 프린팅을 이용한 마찰 전기 소자의 투과도 향상"
2020 Korea Tribology society(KTS), September, 2020
- Shaheer Mohiuddin Khalil, 이재현, 강기호, Rizwan Ul Hassan, 변도영†
"Simulation study of droplet behavior and Maxwell stress in Electrohydrodynamic (EHD) jet printing"
National Congress on Fluids Engineering (11NCFE), August, 2020
- Rizwan Ul Hassan, 이재현, 강기호, 변도영†
"Electric field effect on spreading behavior of fluid in the microchannel"
National Congress on Fluids Engineering (11NCFE), August, 2020
- 문준경, 강기호, 우장미, 고한서, 변도영†
"PIV 기법을 이용한 해조류 거동 모사 유체-구조 상호작용 분석 연구"
National Congress on Fluids Engineering (11NCFE), August, 2020
- 강기호, 이형동, 변도영†
"Electrohydrodynamic (EHD) printing based flexible and transparent patterns with perovskite nanoparticles"
Interntional Meeting on Inforamtion Display 2020 (iMiD 2020), August, 2020
- 이재현, 이형동, 장형석, 조대현, 성백훈, 강기호, 변도영†
"Novel synthesis method for large-single-crystalline 2-dimensional silver nanosheet based on redoxactive tyrosine-rich peptide template"
The 18th International Nanotech Symposium & Exhibition (NANO KOREA 2020) , July, 2020
- 강기호, 황상연, 변도영†
"Fabrication of piezoelectric nanogenerator using nanofiber aligning"
The 18th International Nanotech Symposium & Exhibition (NANO KOREA 2020) , July, 2020
- 변도영†, 강기호, Zhang Bin, 장용희, 전광선, 성백훈, 손원일, Vu Dat Nguyen
"Direct Fabrication of Metallic Micro-Gear via Electrohydrodynamic Inkjet Three-Dimensional Printing"
Society for information Display: Display Week 2020, June, 2020
2019
2019
- Rizwan Ul Hassan, 이형동, 변도영†
"Electrohydrodynamic Jet Printing for High Resolution, Transparent and Flexible Conductive Electronic Devices"
Korean Society of Mechanical Engineering (KSME 2019), November, 2019
- 임부시, 조대현, 변도영†
"전기수력학적 젯 프린팅을 이용한 마찰 전기 소자 제작 연구"
Korean Society of Mechanical Engineering (KSME 2019), November, 2019
- 문준경, 강기호, 우장미, 고한서, 변도영†
"PIV 를 이용한 해조류 모방 유체-구조 상호작용에 대한 실험적 연구"
Korean Society of Mechanical Engineering (KSME 2019), November, 2019
- 강기호, 이형동, 황상연, 문준경, 변도영†
"전기수력학적 젯 프린팅을 이용한 페로브스카이트-폴리머 복합 패턴"
Korean Society of Mechanical Engineering (KSME 2019), November, 2019
- 이재현, 황상연, 이형동, 변도영†
"Stretchable Gel Polymer Electrolyte for Lithium-ion Batteries based on SEBS(Styrene-Ethylene-Butylene-Styrene) Block Copolymer"
Korean Society of Mechanical Engineering (KSME 2019), November, 2019
- Zhang Bin, 변도영†
"Electrohydrodynamic Jet Printed 3D Metallic Grid for Transparent Electrode"
Korean Society of Mechanical Engineering (KSME 2019), November, 2019
- 문준경, 강기호, 우장미, 고한서, 변도영†
"Visualization of algae-mimicking fluid-structure interaction with PIV method"
The 15th Asian Symposium on Visualization (ASV15), September, 2019
- 강기호, 이형동, 장형석, 변도영†
"Pattening of perovskite nanoparticle and polymer composite using electrohydrodynamic (EHD) printing"
2019 International Meeting on Information Display(IMID), August, 2019
- 황상연, Velu Arasu, Bin Zhang, 박성하, 변도영†
"Quantum dot-embedded DNA fibers and patterns via electrospinning and electrohydrodynamic jet printing"
2019 International Meeting on Information Display(IMID), August, 2019
- 강기호, 성백훈, 장형석, 이형동, 변도영†
"2D Silver nanosheets fabrication using hydrogel bio-template air/gel interface"
The 17th International Nanotech Symposium & Nano-Convergence Expo (Nano Korea 2019), July 2019
- 황상연, 이종서, 장형석, 이원영, 변도영†
"Gelatin assisted chemical diffusion barrier for solid oxide fuel cells"
The 17th International Nanotech Symposium & Nano-Convergence Expo (Nano Korea 2019), July, 2019
- 문준경, 강기호, 변도영†
"Marine algae-mimicking fluid-structure interaction in the water flow channel"
Korean Society of Visualization (KSVI) - Summer, June, 2019
- 황상연, 권익준, 변도영†
"전기수력학 젯 프린팅에서 유체 물성에 따른 젯팅 온 디맨드 현상"
Korean Society of Mechanical Engineering (KSME) - Spring (Fluid dynamics) Division, April, 2019
- 강기호, 문준경, 변도영†
"수로장치를 이용한 유동 내 해조류 모사 구조체 거동 연구"
Korean Society of Mechanical Engineering (KSME) - Spring (Fluid dynamics) Division, April, 2019
- Zhang Bin, 변도영 †
"Direct Fabrication of Metallic Micro-Gear via Electrohydrodynamic Inkjet Three-Dimensional Printing"
Korean Society of Mechanical Engineering (KSME) - Spring (Fluid dynamics) Division, April, 2019
2018
2018
- 박선영, 변도영, 황상연, 강현규, 조대현†
"공압-정전기력 분무를 이용한 h-BN을 포함하는 초소수성 표면제작과 마찰 소자의 적용에 관한 연구"
Korean Society of Visualization (KSVI) - Fall, November,2018
- 황상연, 강현규, 변도영†
"공압-정전기력 분무를 이용한 초소수성 표면처리와 마찰전기 소자 제작의 적용에 관한 연구"
Korean Society of Mechanical Engineering (KSME) - Fall, November 2018
- Zhang Bin, 변도영†
"Electrohydrodynamic Jet Printing Assited Self-assembly of Layer-by-layer Graphene Oxide"
Korean Society of Mechanical Engineering (KSME) - Fall, November 2018
- 강기호, 성백훈, 변도영†
"온도에 따른 하이드로겔 필름 생성에 대한 실험적 연구"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2018
- 황상연, 최민기, 장형석, 이원영, 변도영†
"Tailoring the Fabrication of Hetro-Interfacial Structure with Novel Coating Technique for Highly Durable SOFCs"
2018 Materials Research Society, Spring Meeting, April, 2018
- 이재현, 강기호, 변도영†
"전기장 해석 기반의 전기장 내 대전된 액적의 공기층 억제 현상 연구"
Korean Society of Visualization (KSVI) - Spring, April, 2018
- 이종서, 안민우, 황상연, 변도영, 이원영†
"중온 고체산화물 연료전지를 위한 나노-주름 구조 기능층을 통해 향상된 계면 반응성"
Korean Society of Mechanical Engineering (KSME) - Spring (Thermal Engineering) Division, April, 2018
- Ali Turab Jafr, 이형동, Ayodya Pradhipta Tenggara, 임호섭, 문영광, 이영우, 변도영, 이진기†
"Multilayered Electrohydrodynamic Jet Printing of Two-Dimensional Electrode Array in Paper-Based Digital Microfluidics "
Korean Society of Mechanical Engineering (KSME) - Spring (Bio-Engineering) Division, April, 2018
2017
2017
- 강기호, Xiaofeng Wang, 성백훈, 변도영†
"은 나노와이어 액적의 커피링 현상을 이용한 투명 전극 제작"
Korean Society of Visualization (KSVI) - Fall, December 2017
- 강기호, 성백훈, 김영현, 고한서, 변도영†
"하이드로겔 액적 계면 필름 생성에 대한 실험적 연구"
Korean Society of Visualization (KSVI) - Fall, December, 2017
- 강기호, 성백훈, 김영현, 고한서, 변도영 †
"Effect of internal flow and evaporation on hydrogel assembly process at droplet interface"
70th Annual Meeting of the American Physical Society Division of Fluid Dynamics (APS DFD), November, 2017
- . 황상연, 변도영†
"Alignment of piezoelectric fibers using electrostatic lenses"
The Ninth JSME-KSME Thermal and Fluids Engineering Conference, October, 2017
- Zhang Bin, 변도영†
"High-Resolution Electrohydrodynamic 3D Printing for Metallic Conductor"
International Conference on Flexible and Printed Electronics 2017 (ICFPE 2017), September 2017
- 황상연, 변도영†
"Fabrication of metal-grids using electrohydrodynamic jet printing and its application in solid oxide fuel cells"
International Conference on Flexible and Printed Electronics 2017 (ICFPE 2017), September, 2017
- 장용희, 변도영†
"Development of Flexible and Transparent Heater Fabricated by Electrohydrodynamic(EHD) Jet Printing"
International Conference on Flexible and Printed Electronics 2017 (ICFPE 2017), September, 2017
- 변도영†
"High-Resolution Electrohydrodynamic Jet Printing for Flexible Electronics and Nanoscale 3-Dimensional Structuring"
International Conference on Flexible and Printed Electronics 2017 (ICFPE 2017), September, 2017
- Mohammed Janneh, Ayodya Pradhipta Tenggara, Andrea De Marcellis, 변도영, Elia Palagne †
"High Q-factor dual band tunable polarization independent THz flexible metasurface for chemical sensing applications"
The 8th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META 17), July 2017
- 1Ayodya Pradhipta Tenggara, 박세준, Hadi Teguh Yudistira, 안영환, 변도영†
"THz Metamaterials Fabricated using Electrohydrodynamic Jet Printing for Sensitive Detection of Microorganism"
International Conference on Flexible and Printed Electronics 2017 (ICFPE 2017), July 2017
- 강기호, 성백훈, 김영현, 고한서, 변도영†
"Visualization of internal flow and crystalline process in hydrogel droplet"
The 12th International Symposium on Particle Image Velocimetry (ISPIV 2017), June, 2017
- 이종서, 황상연, 안민우, 변도영, 이원영†
"Structural designed nanocrystalline cathode functional layer for solid oxide fuel cells"
Korean Society of Mechanical Engineering (KSME) - Spring, May, 2017
- 강기호, 성백훈, 변도영†
"Experimental investigation of internal flow visualization with ion-gel droplet and its crystallization"
Korean Society of Visualization (KSVI) - Spring, May, 2017
- 김민철, 황상연, 변도영†
"전기 수력학적 젯 프린팅을 이용한 PVDF 나노섬유 패터닝 연구"
Korean Society of Visualization (KSVI) - Spring, May, 2017
2016
2016
- 이재현, 강기호, 변도영†
"액적 충돌에서의 대전된 액적의 공기 층 억제 효과"
Korean Society of Mechanical Engineering (KSME) - Fall, December, 2016
- 이형동, 이재현, 성백훈, 변도영†
"탄성 고분자 PDMS 잉크의 프린팅 공정시 관찰되는 모세관 현상에 관한 실험적 연구"
Korean Society of Mechanical Engineering (KSME) - Fall, December, 2016
- 이재현, 강기호, 변도영†
"전기적으로 대전된 액적의 충돌 현상에서의 공기 층 억제 효과 연구"
Korean Society of Visualization (KSVI) - Fall, December, 2016
- 명재범, Hadi Teguh Yudistira, Ayodya Pradhipta Tenggara, 변도영†
"Line stability of drop on demand electrohydrodynamic jet printing"
Korean Society of Visualization (KSVI) - Fall, December, 2016
- 이재현, 강기호, 변도영†
"The study of suppression effect of air layer with electric field on droplet impact phenomena"
The 9th National Congress on Fluid Engineering (NCFE), August, 2016
- Ayodya Tenggara, 박세준, 안영환, 변도영†
"Terahertz Metamaterials for Sensitive Detection of Microorganism Fabricated using Drop on Demand Technique of Electrohydrodynamic Jet Printing"
The 8th National Congress on Fluid Engineering (NCFE), August, 2016
- 장형석, 성백훈, 변도영, Liwei Lin†
"Bio-inspired super thin and high conductive silver thin film patterning by printing method"
252nd ACS national meeting, August, 2016
- 성백훈, 박현성, 채일경, 왕효풍, 이형동, 장형석, Liwei Lin, 변도영†
"Deposition of coiled silver nanowire ring by spraying method"
252nd ACS national meeting, August, 2016
- 성백훈, 채일경, 이형동, 왕효풍, 변도영†
"액적 내부의 은 나노와이어의 굽힘을 이용한 링 구조 제작"
Korean Society of Visualization (KSVI) - Spring, April, 2016
- 예우준, 이재현, 변도영 †
"Pinched Flow Fractionation 마이크로 채널 내 마이크로 링을 가진 에멀젼 액적의 선택적인 분류에 대한 실험적 연구"
Korean Society of Visualization (KSVI) - Spring, April, 2016
- Ayodya Tenggara, 변도영†
"Metamaterial-Based Microorganism Sensors Fabricated by Electrohydrodynamic (EHD) Jet Printing"
Materials Research Society, March, 2016
2015
2015
- 이재현, 변도영†
"Study of correlation between charge amount of electrified droplet and its size in electric field caused by applied voltage"
The Korean Society of Visualization (KSVI) - Fall, December, 2015
- Marten Darmawan, 강기호, 변도영†
"Development of Surface Acoustic Wave Atomizer for Thin-film Fabrication"
The Korean Society of Visualization (KSVI) - Fall, December, 2015
- 채일경, 성백훈, Marten Darmawan, 변도영†
"Study on Electric field assisted low frequency (20 kHz) ultrasonic spray"
68th Annual Meeting of the APS Division of Fluid Dynamics, November, 2015
- Xiaofeng Wang, 성백훈, Hadi Teguh Yudistira, 변도영†
"Coffee ring effect resulted conductive nanowire patterns by evaporating colloidal suspension droplets without sintering process"
68th Annual Meeting of the APS Division of Fluid Dynamics, November, 2015
- 성백훈, 채일경, 황상연, 이형동, 변도영†
"Analysis of Charged Droplets by Electric field assisted spray and Their Application in Transparent Electrode"
2015 International Meeting on Information Display(IMID), August, 2015
- 이형동, 정용진, 이병선, 박선욱, Hadi Teguh Yudistira, Chwee-Lin Choong, 박종진, 박찬은, 변도영†
"Binder-free Poly(3-hexylthiophene) (P3HT) Field-effect Transistors for Printed Electronics"
2015 International Meeting on Information Display(IMID), August, 2015
- 구자양, 안민우, 최민기, 황상연, 박준영, 차석원, 변도영, 이원영†
"Electrospun yttria-stabilized zirconia nanofibers for low temperature solid oxide fuel cells"
The 11th Pacific Rim Conference Of Ceramic Societies, August, 2015
- 최민기, 김서주, 안민우, 구자양, 황상연, 변도영, 이원영†
"Nanostructured Gd0.1Ce0.9O2 fiber/La0.6Sr0.4Co0.2Fe0.8O3 powder composite cell for IT-SOFCs"
The 11th Pacific Rim Conference Of Ceramic Societies, August, 2015
- 안민우, 한승훈, 구자양, 최민기, 황상연, 변도영, 이원영†
"Electrospun Sm0.5Sr0.5CoO3 nanofibers for solid oxide fuel cell cathodes"
The 11th Pacific Rim Conference Of Ceramic Societies, August, 2015
- 이형동, 성백훈, 변도영†
"Silver nanowires based stretchable strain gauge for printed electronics"
2015 International Meeting on Information Display(IMID), August, 2015
- 채일경, Marten Darmawan, 성백훈, 변도영†
"Study on Atomization of Liquid by Electric field assisted low frequency (20kHz) Ultrasonic"
ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), July, 2015
- 성백훈, 채일경, 황상연, 이형동, 변도영†
"Analysis of Charged Droplets by Electric Field Assisted Spray and Their Application in Transparent Electrode"
ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), July, 2015
- Marten Daramawan, 변도영†
"Rapid surface acoustic wave spray system"
ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), July, 2015
- Ayodya Pradhipta Tenggara, 장용희, Hyowon Tak, Vu Dat Nguyen, 변도영†
"Fabrication of Three Dimensional Electrode Lines using High Speed Electrohydrodyanmic (EHD) Jet Printing"
ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), July, 2015
- Xiaofeng Wang, 이형동, 변도영†
"Silver Nanowire Coffee-Ring Effect on Solid Surface by Natural Evaporation"
ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), July, 2015
- 황상연, 구자양, 변도영, 이원영†
"Enhanced performance with interlayer of YSZ nanofibers in solid oxide fuel cells"
The 13th International Nanotech Symposium & Nano-Convergence Expo (Nano Korea 2015), July, 2015
- 성백훈, 트룽 키엔 뉘엔, Vu Dat Nguyen, 박정근, 변도영†
"Liquid meniscus의 모니터링 기법을 이용한 전기 수력학 분무 및 젯의 안정성 향상 및 제어"
The 30th Institute of Control, Robotics and Systems(ICROS), May, 2015
- 황상연, 변도영†
"공기 유동과 전기장이 접목된 전기방사의 임계길이"
Korean Society of Visualization (KSVI) - Spring, May, 2015
- Marten Darmawan, 성백훈, 채일경, 변도영†
"전기장을 결합한 저진동수(20kHz) 초음파 분사에 전위가 미치는 영향"
Korean Society of Visualization (KSVI) - Spring, May, 2015
- 구자양, 안민우, 권오길, 김서주, 이병근, 황상연, 변도영, 이원영†
"YSZ 나노섬유를 이용한 고체산화물 연료전지 성능 향상"
Korean Society for Precision Engineering(KSPE) - Spring, May, 2015
2014
2014
- Xiaofeng Wang, 변도영†
"Three dimensional electrode lines printed by high speed electrohydrodynamic jet printing"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2014
- Ayodya Pradhipta Tenggara, 변도영†
"Experimental study of coffee ring effect with ag nanowire"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2014
- 이형동, 변도영†
"전기수력학 젯 프린팅 공정으로 제작된 P3HT 전계효과 트랜지스터"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2014
- 성백훈, 변도영†
"Atomization of charged droplets generated by electricfield-assisted spray"
The 8th National Congress on Fluid Engineering (NCFE), August, 2014
- 이형동, 변도영†
"전기수력학 젯 프린팅으로 정렬한 나노와이어 기반의 플렉시블 박막 트랜지스터"
The 8th National Congress on Fluid Engineering (NCFE), August, 2014
- Marten Darmawan, Doyoung Byun†
"The study of peculiar elongated droplet jetting formation induced by focused surface vibration"
The 8th National Congress on Fluid Engineering (NCFE), August, 2014
- 장빈, 변도영†
"Fabrication of high resolution-hierarchical structure by using electrohydrodynamic assisted 3D printing technique"
The 8th National Congress on Fluid Engineering (NCFE), August, 2014
- 성백훈, 변도영†
"Highly Uniform Silver nanowire Transparent Electrode on Large Area Substrate by Electric Field-assisted Spray"
International Aerosol Conference, August, 2014
- 성백훈, 변도영†
"Analysis of Atomization of the Charged Droplets by Electric field-Assisted Spray"
International Aerosol Conference, August, 2014
- 이재현, 김지훈, 성백훈, 변도영†
"대전된 초소수성 기판에서의 액적 점핑 현상 연구"
Korean Society of Mechanical Engineering (KSME) - Spring (Fluid dynamics Division), May, 2014
- 황상연, 변도영†
"동축공기유동을 통해 집속된 전기수력학 젯 프린팅"
Korean Society of Mechanical Engineering (KSME) - Spring (Fluid dynamics Division), May, 2014
- 황상연, 성백훈, 변도영†
"동축 공기유동이 접목된 전기수력학 젯 프린팅"
Korean Society of Visualization (KSVI) - Fall, April, 2014
- 이재현, 김지훈, 변도영†
"기판의 대전 유무와 다양한 Weber number에 따른 액적 점핑 현상 연구"
Korean Society of Visualization (KSVI) - Fall, April, 2014
- 이형동, 성백훈, 김지훈, 장용희, 변도영†
"Highly Aligned Pattern of Nanowires with a High Aspect Ratio by Electrohydrodynamic (EHD) Jet Printing"
Material Research Society, April, 2014
- Hadi Teguh Yudistira, Ayodya Pradhipta Tenggara, Vu Dat Nguyen, 김튼튼, 최무한, 변도영†
"Electrohydrodynamics Jet Printing: Alternative Fabrication Method for Terahertz Metamterial with High Refractive Index"
Material Research Society, April, 2014
- Marten Darmawan, 전광선, 변도영†
"The Application of Surface Acoustic Wave and Electrostatic Deposition as an Alternative Method to Deposit PEDOT-PSS Particles for The Fabrication of Transparent Conductive Film"
Material Research Society, April, 2014
2013
2013
- 김지훈, 변도영 †
"Active Motion Control of Tetrahymena pyriformis by Galvanotaxis and Geotaxis "
American Physical Society, November, 2013
- 이형동, 장용희, 변도영†
"전기수력학적 젯 프린팅을 이용한 고 종횡비 은 나노와이어의 정렬 및 패터닝"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2013
- 김지훈, 이형동, 장용희, 변도영†
"전기수력학적 마이크로 젯의 속도 분포에 관한 실험적 연구"
Korean Society of Visualization (KSVI) - Fall, November, 2013
- 변도영†
"Investigation of ground effect on aerodynamic forces and three-dimensional flow structures for a flapping wing "
10th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), October, 2013
- 김지훈, 이형동, 장용희, 변도영 †
"Experimental investigation of velocity distribution with the electrohydrodynamic micro-fiber jetting using high viscosity liquid "
The 9th Pacific Symposium on Flow Visualization and Image Processing, August, 2013
- 김지훈, 변도영†
"다양한 표면 거칠기와 광합성 영향에 따른 미생물 연료 전지에 대한 실험적 연구"
Korean Society of Mechanical Engineering (KSME) - Spring (Bio-Engineering Division), May, 2013
- 이재현, 황상연, 강방권, 변도영 †
"The Novel Method of Selective Patterning on the Heterogeneous Surface "
International Symposium on Nature-Inspired Technology 2013, January, 2013
2012
2012
- Marten Darmawan, 전광선, 변도영 †
"Droplet Jumping Induced by Focused Surface Acoustic Wave on Superhydrophobic Surface "
65th Annual Meeting of the Division of Fluid Dynamics, November, 2012
- 성백훈, 장용희, 유현웅, Vu Dat Ngyuen, 변도영†
"Experimental Study on the Euglena gracilis for MicroTransportation using a Phototatic Control "
65th Annual Meeting of the Division of Fluid Dynamics, November, 2012
- 성백훈, 장용희, 유현웅, Vu Dat Ngyuen, 변도영†
"마스크 기법을 이용한 집중된 전기 분무 패터닝에 관한 실험적 연구"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2012
- Marten Darmawan, Doyoung Byun†
"Droplet Jumping Phenomena Induced by Focused Surface Acoustic Wave(F-SAW)"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2012
- Fariza Dian,Hadi Teguh Yudistira, Doyoung Byun†
"Silver Dots Printing on Si Wafer by using Electrohydrodynamic (EHD) Jet Printing"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2012
- Hadi Teguh Yudistira, Ayodya Pradhipta Tenggara, Vu Dat Nguyen, 최무한, Doyoung Byun†
"Fabrication of Terahertz Metamaterial by using Drop-on-Demand (DoD) Electrohydrodynamics (EHD) Jet Printing"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2012
- 김지훈, 변도영†
"마이크로 채널 내에서 발생하는 Cassie 및 Wenzel 상태 조건에 관한 연구"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2012
- 유현웅, 장용희, 부닷뉘엔, 변도영†
"전기수력학 잉크젯 프린팅 기법으로 형성한 투명 메쉬 전극"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2012
- 김지훈, 변도영†
"대전된 초소수성 표면에서의 액적 충돌에 관한 연구"
Korean Society of Visualization (KSVI) - Fall, November, 2012
- 성백훈, 장용희, 유현웅, 부닷 뉘엔, 변도영†
"전기 분무-마스크 기법을 이용한 집중된 패턴에 관한 연구"
Korean Society of Visualization (KSVI) - Fall, November, 2012
- Fariza Dian Prasetyo,Hadi Teguh Yudistira, Doyoung Byun†
"전기수력학 젯 프린팅의 실버 닷팅 형태 연구"
Korean Society of Visualization (KSVI) - Fall, November, 2012
- Hadi Teguh Yudistira, Ayodya Pradhipta Tenggara, Vu Dat Nguyen, 최무한, Doyoung Byun†
"티라헤르츠 메타매터리얼 제작을 위한 드롭 온 디멘드형 전기수력학 젯 프린팅"
Korean Society of Visualization (KSVI) - Fall, November, 2012
- Marten Darmawan, Doyoung Byun†
"다양한 집중된 표면탄성파 의해 발생한 특이한 액적 점핑 효과"
Korean Society of Visualization (KSVI) - Fall, November, 2012
- Fariza Dian Prasetyo, Hadi Teguh Yudistira, Vu Dat Nguyen, Doyoung Byun†
"Morphologies of Ag Dots Printed by Electrohydrodynamic(EHD) Jet Printing on a Silicon Wafer "
2012 12th International Conference on Control, Automation and Systems(ICCAS 2012), October, 2012
- Marten Darmawan, Gwangseon Jeon, Doyoung Byun†
"SAW를 이용한 SWCNT 증착 및 투명전극필름의 제작에 관한 연구"
The 7th National Congress on Fluid Engineering (NCFE), August, 2012
- Fariza Dian Prasetyo, Hadi Tegyh Yudistria, Vu Dat Nguyen, Doyoung Byun†
"전도성 기판위에 EHD 기법으로 패턴된 Ag 잉크의 망점 분석에 관한 연구"
The 7th National Congress on Fluid Engineering (NCFE), August, 2012
- 김지훈, 장용희, 변도영†
"Experimental study on biological mixing by Tetrahymena pyrifomis (T. pyriformis) "
The 12th International Conference on Intelligent Autonomous Systems(IAS-12) , June, 2012
- Hadi Tegyh Yudistria, Vu Dat Nguyen, Doyoung Byun†
"전기수력학 젯 프린팅을 통한 고해상도 미세 전극 프린팅"
Korean Society of Mechanical Engineering (KSME) - Spring (CAE and Applid Mechanics Division), June, 2012
- Hadi Tegyh Yudistria, Vu Dat Nguyen, Doyoung Byun†
"High Resolution Electrohydrodynamic (EHD) Jet Printing for Fabrication of 1 um AZ Electrode"
Korean Society of Mechanical Engineering (KSME) - Spring (Micro/Nano Engineering Division), May, 2012
- Tuyen Quang Le, Le, Soo Hyung Park, Hoon Cheol Park and Doyoung Byun †
"Aerodynamic forces of beetle flapping wing "
Asian/Australian Rotocraft Forum (ARF) 2012 , Feburary, 2012
- Trung-Hieu Tran, Doyoung Byun†
"Energy Source from Swimming motion of Bacteria Serratia Marcescens"
International Symposium on Nature-Inspired Technology (ISNIT) 2012 , January, 2012
- Jihoon Kim, Doyoung Byun†
"Micro-robot by using the Tetrahymena pyriformis ciliary motion"
International Symposium on Nature-Inspired Technology (ISNIT) 2012 , January, 2012
- Tuyen Quang Le, Tien Van Truong, Doyoung Byun†
"Aerodynamic Performance of Beetle Hind Wing in Flapping Motion "
International Symposium on Nature-Inspired Technology (ISNIT) 2012 , January, 2012
2011
2011
- Marten Darmawan, Doyoung Byun†
"The effect of Polarity in EHD Jetting Phenomena inside a nozzle"
Korean Society of Visualization (KSVI) - Fall, December, 2011
- Tien Van Truong, Doyoung Byun†
"Kinematic and Mechanic of Ground take-off in the Beetle Flight (Rhinoceros Beetle Trypoxylus dichotomus)"
Korean Society of Visualization (KSVI) - Fall, December, 2011
- Jihoon Kim, Marten Darmawan, Doyoung Byun†
"Visualization of the Internal Flow for the Electrohydrodynamic(EHD) jetting"
Korean Society of Visualization (KSVI) - Fall, December, 2011
- Trung Hieu Tran, Doyoung Byun†
"Numerical Simulation and Experimental Study on Swimming Bacteria Serratia Marcescens"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2011
- 김지훈, 변도영, 김민준†
"Experimental Study on the Control of the Euglena gracilis for Transportation using phototaxis"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2011
- 김지훈, 변도영†
"Experimental Study on the Control of the Euglena gracilis for Transportation using phototaxis"
Korean Society of Mechanical Engineering (KSME) - Fall, November, 2011
- 김지훈, 변도영†
"PDMS 마이크로 채널 내에서 발생하는 젖음성에 관한 연구"
Korean Society of Mechanical Engineering (KSME) - Spring, April, 2011
2010
2010
- Jihoon Kim, Si Bui Quang Tran, Doyoung Byun†
"Qualitative Electrohydrodynamic-jetting Flow Visualization of inside Taylor Cone using micro-PIV"
Korean Society of Visualization (KSVI) - Fall, November, 2010
- Indra Hartarto Tambunan, Doyoung Byun†
"Experimental Study of Electrospray in Coaxial Liquid Jets"
The 6th National Congress on Fluid Engineering (NCFE), August, 2010
- Jihoon Kim, Yonghee Jang, Doyoung Byun, Sungwon Nam, Sungsu Park†
"Measurement Of Fluid Flow Biologically Induced By Tetrahymena"
The 14th International Symposium on Flow Visualization, June, 2010
- Jihoon Kim, Si Bui Quang Tran, Doyoung Byun†
The 14th International Symposium on Flow Visualization, June, 2010
- 김지훈, 장용희, 변도영, 남성원, 박성수†
"원생동물을 이용한 마이크로 챔버 내 유도 속도의 실험적 연구"
Korean Society of Mechanical Engineering (KSME) - Spring (Bio-Engineering Division), April, 2010
- 김지훈, 장용희, 변도영, 남성원, 박성수†
"전기 주성을 이용한 마이크로 챔버내 테트라히메나 동적 특성 제어"
Korean Society of Mechanical Engineering (KSME) - Spring (Bio-Engineering Division), April, 2010
Page updated
Google Sites
Report abuse