Ph. D.

P. Janaki Ramulu, Forming behavior of friction stir welded blanks, 2008-2012 (Completed) (Presently at Adama Science and Technology University, Ethiopia)

V. Satheesh Kumar, Forming of adhesive bonded steel sheets, 2010-2014 (Completed) (Presently at NIT Trichy, Trichy, India)

Arvind K Agrawal, A study on end forming of tubes (Completed) (Presently at IIT BHU as RA)

Tinu P. Saju, Friction stir form joining of AA5052-H32 and AA6061T6 sheets (Completed) (Presently at TKM College of Engineering, Kerala, India)

Pritam K. Rana, Friction stir spot welding of sandwich sheets made of AA5052-H32 skin and HDPE core (Completed) (Presently at NIMS University, Jaipur)

Saibal K Barik, Formability and Failure Response of AA5052-H32 Sheets Deformed using a Shock Tube (Completed) [with Prof. N. Sahoo] (Presently at Oleo International, India)

Nitish Bhardwaj, Experimental and Computational Studies on Exit-Hole-Free Friction Stir Spot Welding Process (Completed) [with Prof. U.S. Dixit] (Presently at Jorhat Engineering College, Assam, India)

Priyabrata Nath, Mechanical joining of sheets (2017 to till date)

Sukanta Das, Joining of dissimilar sheets by friction stir welding (2017 to till date)

Rishabh Saxena, High temperature forming of stainless steel sheets (2018 to till date)

M.Tech./M.S.

Saurav Kumar, Quasi-static and impact testing on welded metallic structures by using shock tube, 2022-2023 (M.S. Research, CDMR) 

Nikhil Gupta, Spot joining of dissimilar grade sheets by friction stir additive manufacturing, 2022-2023

B. Sai Harshith, Experimental and numerical investigation of self-piercing riveting of automotive grade sheets, 2022-2023

Praveen Verma, Friction Stir Spot Welding of Metallic and Sandwich Sheets with the help of a Consumable Rivet, 2021-2022

Suraj Gupta, Joining of dissimilar grade sheets using consumable sheet, 2020-2021

Nishibonya Kakoti, Friction stir spot welding of sandwich structures, 2020-2021

Shivam Agrawal, Prediction of Forming Limit Diagram of Metallic Sheet, 2020-2021

Vikash Dahiya, Forming limit prediction of AA5052-H32 sheets at elevated temperature and different lubricants, 2019-2020

Suketa Chaudhary, Implementation of an anisotropic yield function for sheet forming simulations, 2019-2020

Arpit Tripathi, Implementation of yield functions for sheet forming simulations, 2018-2019

Nayanjyoti Sarma, Forming of Al5052-H32 sheets at elevated temperature, 2018-2019

Kishor Patowary, Friction stir additive manufacturing of Aluminium alloys and scaled-down forming, 2017-2018

Girish Kukreja, Forming of adhesive bonded steel sheets with rubber pad, 2017-2018

Ankita Shende, Forming limit of adhesive bonded sheets with varying adhesive properties, 2017-2018

Karn K Ravi, Friction stir spot welding of two-layered sandwich sheets, 2016-2017

Sudhir Kumar Gupta, Comparative study on friction stir spot welding (FSSW) and Self-Pierced Riveting (SPR) of Aluminium grade sheets, 2016-2017

Deepjyoti Baruah, Selection of welding processes and optimization of process parameters for fabricating tailor welded blanks, 2016-2017

Deepak Mylavarapu, Experimental and numerical simulation of self-pierced riveting process (with Dr. Manas Das), 2015-2016

Mikel Azkue Egia, Maintenance asset criticality and RAM-LCC analysis: A boiler fleet case study (with Dr. Eduardo Castellano, IKERLAN, Spain), 2015-2016

Navjot Singh Sanghu, Impact behavior investigations of GFRP laminate composites (with Dr. P.S. Robi), 2015-2016

Yogendra Rajpoot, Cellular Automata Finite Element modeling of friction stir welding of Steel sheets and tool design, 2014-2015

Premananda Ekka, Investigation on the end forming of tubes, 2014-2015

Sharad R Valvi, CAFE modeling to predict the forming during friction stir welding of Aluminium grades, 2013-2014

Avinash Kumar Yadav, Springback of adhesive bonded sheets of similar and dissimilar steel, 2013-2014

B.Durga Rao, Formability and springback of friction stir welded sheets made of dissimilar Aluminium alloys, 2012-2013

D. Doley, Influence of wire reinforcement on the formability of adhesive bonded steel sheets, 2012-2013

Mukesh Kumar, Formability of friction stir welded sheets made of dissimilar materials, 2011-2012

R. Saluja, Modelling material heterogeneities in friction stir weld region using Cellular Automata based Finite Element analysis, 2010-11

C. Patel, Application of Cellular Automata based and Finite Element analysis to investigate the friction stir welding process, 2010-11

Ravikant, Investigation on the forming of adhesive bonded blanks, 2009-10

Susanta K. Dey, Computing the tensile behavior of tailor welded blanks by ANN based expert system, 2009-10

Nilesh M. Bondre, Weld region representation during the formability prediction of friction stir welded tailored blanks, 2009-10

Srinivas B. Naik, Predicting the forming limit of un-welded and tailor welded blanks and experimental validation, 2008-09

Abhishek T. Dhumal, An expert system to predict the tensile and deep drawing behavior of tailor welded blanks, 2008-09

K. Sivakrishna, An expert system to predict the forming limit of tailor welded blanks, 2008-09

K. Veerababu, Prediction of tensile and deep drawing behaviour of tailor welded blanks by artificial neural networks (with Dr. G. Saravanakumar), 2007-08

B.Tech.

Ishwar Kapoor, Warm forming of Magnesium alloys, 2015-2016

K. Suraj, Wheel chair for handicapped with some innovations, 2015-2016

B. Vijay, Wheel chair for handicapped with some innovations, 2015-2016

Arun Krishnan, Self Pierced Riveting: Modeling and Analyses, 2014-2015

Rupesh Kumar Verma, Self Pierced Riveting: Modeling and Analyses, 2014-2015

Vishnu Ganesh, Experimental investigation of the formability of sandwich steel sheets, 2013-2014

Ramniwas, Springback investigation of adhesive bonded sheets, 2013-2014

Ravi Kumar, Springback investigation of adhesive bonded sheets, 2013-2014

Siddhartha Karidi, Springback studies of friction stir welded sheets, 2013-2014

Katre Sudhindra Jitendra, Springback studies of friction stir welded sheets, 2013-2014

R.V. Siva Nikhil, Alignment of structured and unstructured meshes for internal boundaries (with Dr. G. Saravanakumar), 2007-2008

D. Sumanth, Alignment of structured and unstructured meshes for internal boundaries (with Dr. G. Saravanakumar), 2007-2008