International Journal
[2026-2027]
(under review) Hong, G., Ho-Nguyen-Tan, T., Jeong, C., Yu, J., Kim, E., Kim, M., Yoon, S.H., “Structural Analysis of Carbon-Fiber-Reinforced Polymer Propeller Blades Considering Fiber Distorsion Effects,”
(under review) Kim, K., Bae, K.J., Kim, G., Jang, Y., Yang, J., Yu, J., Kim, E., “Efficiently Tunable CFRP Metamaterials via Internal Contact Mechanism,”
[58] Park, K., Oh, Y., Jang, W., Kim, C., Yoon, S., Kim, M., Kim, E., Yu, J., “Effect of stacking sequence and fiber hybridization on low-velocity impact damage of composite overwrapped pressure vessels: Experimental and numerical analysis,” Composites Part B: Engineering, 329, 114211, 2027
[57] Jang, Y., Kim, E., Rho, J., “Scattering of waves in locally resonant woodpile structures with impurities,” Physical Review E, 114, 035503, 2026.
[2025]
[56] Jang, Y., Oh, B., Kim, E., Rho, J., “Bidirectional asymmetric frequency conversion in nonlinear phononic crystals,” Physical Review Letters, 135(3), 036603, 2025.
[55] Jang, Y., Kim, S., Kim, M., Kim, G., Kim, E., Rho, J., “Mode-coupled infinite topological edge state in bulk-lattice-merged mechanical Su-Schrieffer-Heeger chain,” Extreme Mechanics Letters, 77, 102334, 2025.
[54] Jang, Y., Kim, S., Kim, E., Rho, J., “Singular topological edge states in locally resonant metamaterials,” Science Bulletin, 70(7), pp.1080-1086, 2025.
[53] Jang, Y., Kim, S., Lee, D., Kim, E., Rho, J., “Bound states to bands in the continuum in cylindrical granular crystals,” Physical Review Letters, 134(13), 136901, 2025.
[52] O’Neil, J., Salviato, M., Kim, E., Yang, J., “Geometric effects on the crashworthiness of composite Kresling origami tubes,” International Journal of Solids and Structures, 309, 113199, 2025.
[51] Jang, Y., Kim, E., Yang, J., Rho, J., “Sculpt wave propagation in 3D woodpile architecture through vibrational mode coupling,” Mechanical Systems and Signal Processing, 224, 112112, 2025.
[2024]
[50] Park, J., Yoon, S., Kim, E., Kim, M., “Flame-retardant aramid felt-reinforced phenolic coatings for carbon fiber-reinforced polymers (CFRPs),” Polymer Testing, 135, 108468, 2024.
[49] Jang, Y., Kim, E., Yang, J., Rho, J., “Physics-informed discrete element modeling for the bandgap engineering of cylinder chains,” Applied Mathematical Modelling, 125, pp.571-590, 2024.
[2023]
[48] Nafo, W., Ogulcan, G., Jun, H., Kim, E., “Ligamentous tethering and intradiscal pressure affecting the mechanical environment of scoliotic spines,” Medical Engineering and Physics, 119, 104035, 2023.
[2022]
[47] Jang, Y., Lee, G., Kim, E., Rho, J., “Impulse mitigation in nonlinear composite-based woodpile phononic crystals,” Applied Physics Letters, 121(20), 201706, 2022
[46] Yoo, S. †, Kim, G. †, Schiffer, A., Cantwell, W.J., Kim, E., Kim, T.-Y., “Detection of delaminations in AS4/PEEK composite plates using highly nonlinear solitary waves,” Composite Structures, 289, 115511, 2022. (†Equally distributed first author)
[2021]
[45] Yoon, S., Yu, M., Kim, E., Yu, J., “Strain Transfer Function of Distributed Optical Fiber Sensors and Back-Calculation of the Base Strain Field,” Sensors, 21, 3365, 2021.
[2020]
[44] Kwon, I.-B., Kwon, Y.-S., Seo, D.-C., Yoon, D.-J., and Kim, E., “A Technic for ground anchor force determination from distributed strain using fiber optic OFDR sensor with the rejection of a temperature effect,” Applied Sciences, 10, 8437, 2020.
[43] Schiffer, A., Alia, R.A., Cantwell, W.J., Lee. D., Kim, E., and Kim, T.-Y., “Elastic interaction between nonlinear solitary waves in granular chains and composite beams: Experiments and modelling,” International Journal of Mechanical Sciences, 170, 105350, 2020.
[2019]
[42] Kim, E., Chaunsali, R., Yang, J., “Gradient-index granular crystals: From boomerang motion to asymmetric transmission of waves,” Physical Review Letters 123, 214301, 2019.
[41] Kim, E., Yang, J.,”Review: Wave propagation in granular metamaterials,” Functional Composites and Structures, 1, 012002, 2019.
[40] Kim, H., Shi, X., Kim, E. †, Yang, J. †, “Bloch oscillation of elastic waves in the graded lattice of 3D-printed hollow elliptical cylinders,” Applied Physics Letters, 114, 101905, 2019. (†Equally distributed corresponding author)
[39] Kim, H., Kim, E. †, Yang, J. †, “Nonlinear wave propagation in 3D-printed graded lattices of hollow elliptical cylinders,” Journal of the Mechanics and Physics of Solids, 125, pp.774-784, 2019. (†Equally distributed corresponding author)
[2018]
[38] Hwang, H.Y., Lee, J.W., Kim, E., Yang, J., Shul, C.W., “Effects of material anisotropy on impact mitigation in single column woodpile structures,” Journal of Mechanical Science and Technology, 32(12), pp.5817-5822, 2018.
[37] Shiffer, A., Lee, D., Kim, E. †, Kim, T.-Y†,”Interaction of highly nonlinear solitary waves with rigid polyurethane foams,” International Journal of Solids and Structures, 152-153, pp.39-50,2018. (†Equally distributed corresponding author)
[36] Hauver, S., He, X., Mei, D., Charalampidis, E.G., Kevrekidis, P.G., Kim, E., Yang, J., Vainchtein, A., “Lattices with internal resonator defects,” Physical Review E, 98, 032902, 2018.
[35] Hwang, H.Y., Lee, J.W., Yang, J., Shul, C.W., Kim, E., “Sandwich-Structured Woodpile Metamaterials for Impact Mitigation,” International Journal of Applied Mechanics, Vol. 10, No. 7, 1850078, 2018.
[34] Chaunsali, R. *, Kim, E.*, and Yang, J., “Demonstration of accelerating and decelerating nonlinear impulse waves in functionally graded granular chains,” Philosophical Transactions of the Royal Society A, 376, 20170136, 2018. (*Equally contributed first author)
[33] Kim, H., Kim, E., Chong, C., Kevrekidis, P.G., and Yang, J., “Demonstration of dispersive rarefaction shocks in hollow elliptical cylinder chains,” Physical Review Letters, 120, 194101, 2018.5.
[32] Kim, E., Martinez, A.J., Phenisee, S.E., Kevrekidis, P.G., Porter, M.A., and Yang, J., “Direct measurement of superdiffusive energy transport in disordered granular chains,” Nature Communications, 9, 640, 2018. (DOI: 10.1038/s41467-018-03015-3)
[31] Choi, H.K., Yu, J., Kim, E., Shin, E.S., “Estimation of interfacial properties of nanocomposies using an analytical interphase model,” Composite Structures, 184, pp.437-442, 2018.1.
[2017]
[30] Chaunsali, R., Toles, M., Yang, J., Kim, E.†, “Extreme control of impulse transmission by cylinder-based nonlinear phononic crystals,” Journal of the Mechanics of Physics of Solids, 107, pp. 21-32, 2017.
[29] Chaunsali, R. *, Kim, E.*,Thakkar, A., Kevrekidis, P.G., Yang, J., “Demonstrating an in-situ topological band transition in cylindrical granular chains,” Physical Review Letters, 119, 024301, 2017. (*Equally contributed first author)
[28] Singhal, T., Kim, E.†, Kim, T.-Y., Yang, J., “Weak bond detection in composites using highly nonlinear solitary waves,” Smart Materials and Structures, Vol.26, 055011, 2017.
[27] Kim, E., Yang, J., Hwang, H., Shul, C.W., “Impact and blast mitigation using locally resonant woodpile metamaterials,” International Journal of Impact Engineering, Vol.101, pp.24-31, 2017.
[2016]
[26] Martinez, A.J., Yasuda, H., Kim, E., Kevrekidis, P.G., Porter, M.A., Yang, J., “Scattering of waves by impurities in precompressed granular chains,” Physical Review E, Vol. 93, Iss. 5, 052224, 2016.05.25
[25] Chong, C., Kim, E., Charalampidis, E.G., Kim, H., Li, F., Kevrekidis, P.G., Lydon, J., Daraio, C., Yang, J., “Nonlinear vibrational-state excitation and piezoelectric energy conversion in harmonically driven granular chains,” Physical Review E, Vol. 93, Iss. 5, 052203, 2016.5.5.
[~ 2015]
[24] Kim, E., Xu, H., Chaunsali, R., Castillo, J., Yang, J., Kevrekidis, P., and Vakakis, A.F., “Nonlinear Low-to-High Frequency Energy Cascades in Diatomic Granular Crystals,” Physical Review E, Vol. 92, Iss. 6, 062201, 2015.12.4.
[23] Kim, E., Yang, J., Restuccia, F., and Daraio, C., “Solitary wave-based delamination detection in composite plates using a combined granular crystal sensor and actuator,” Smart Materials and Structures, Vol. 24, 125004, 2015.10
[22] Kim, E., Kim, Y., Yang, J., “Nonlinear stress wave propagation in 3D woodpile elastic metamaterials,” International Journal of Solids and Structures, Vol. 58, pp.128-135, 2015.
[21] Kim, E., Li, F., Chong, C., Theocharis, G., Kevrekidis, P., Yang, J., “Highly nonlinear wave propagation in elastic woodpile periodic structures,” Physical Review Letters, Vol. 114, 118002, 2015
[20] Meidani, M., Kim, E., Li, F., Yang, J., “Tunable evolutions of wave modes and bandgaps in quasi-1D cylindrical phononic crystals,” Journal of sound and vibration, Vol. 334, No.6, pp.270-281, 2015.01
[19] Aich, N., Kim, E.*, ElBatanouny, M., Plazas-Tuttle, J., Yang, J., Ziehl, P. and Saleh, N., “Detection of crack formation and stress distribution for carbon fiber reinforced polymer specimens through Triboluminescent-based imaging,” Journal of Intelligent Material Systems and Structures, Vol. 26, No. 8, pp. 913-920, 2015 (*Equally contributed first author)
[18] Kim, S., Kim, E., Jeong, M., Lee, I., “Damage evaluation and strain monitoring for composite cylinders using tin-coated FBG sensors under low-velocity impacts,” Composites Part B, vol. 74, pp.13-22, 2015.
[17] Kim, E., Yang, J., “Wave propagation in single column woodpile phononic crystals: Formation of tunable band gaps,” Journal of the Mechanics and Physics of Solids, Vol. 71, pp.33-45, 2014.11.
[16] Kim, S.W., Cha, M.C., Lee, I., Kim, E.H., Kown, I.B., Hwang, T.K., “Damage evaluation and strain monitoring of composite plates using metal-coated FBG sensors under quasi-static indentation,” Composites: Part B, Vol. 66, pp.36-45, 2014.10
[15] Yang, J., Gonzalez, M., Kim, E., Agbasi, C., Sutton, M., “Attenuation of solitary waves and localization of breathers in 1D granular crystals Visualized via high speed photography,” Experimental Mechanics, Vol. 54, pp. 1043-1057, 2014.07
[14] Rim, M., Kim, E.-H., Kang, W.-R., Lee, I., “Development of a shape memory alloy wire actuator to operate a morphing wing,” Journal of Theoretical and Applied Mechanics, Vol. 52, No.2, pp. 519-531, 2014.
[13] Kim, S.-W., Jeong, M.-S., Lee, I., Kim, E.-H., Kown, I.-B., and Hwang, T.-K., “Determination of the maximum strains experienced by composite structures using metal coated optical fiber sensors,” Composite Science and Technology, Vol. 78, pp. 48-55, 2013.04
[12] Kim, E.-H., Rim, M.-S., Lee, I., and Hwang, T.K., “Composite Damage Model Based on Continuum Damage Mechanics and Low Velocity Impact Analysis of Composite Plates,” Composite Structures, Vol. 95, pp.123-134, 2013.01
[11] Kim, E.-H., Lee, I., and Hwang, T.K., “Low-Velocity Impact and Residual Burst Pressure Analysis of Cylindrical Composite Pressure Vessels,” AIAA Journal, Vol. 50, No. 10, pp. 2180- 2193, 2012.10
[10] Kim, H.C., Kim, E.-H., Lee, I., Byun, J.H., Kim, B.S., and Ahn, S.M., “Fabrication of Carbon Nanotubes Dispersed Woven Carbon Fiber/Epoxy Composites and Their Damping Characteristics,” Journal of Composite Materials, Vol. 47, No. 8, pp.1045-1054, 2012.
[9] Cho, S.-I., Yoo, S.-J., Kim, E.-H., Kim, S.-W., Lee, I., Park, K.-C., and Kwon, I.-B., “Effects of Bonding Layer Characteristics on Strain Transmission and Bond Fatigue Performance,” Journal of Adhesion Science and Technology, 26, pp.1325-1339, 2012.07
[8] Kang, W.R., Kim, E.-H., Jeong, M.-S., and Lee, I., “Morphing Wing Mechanism Using an SMA Wire Actuator,” International Journal of Aeronautical & Space Sciences, 13(1), pp.376-381, 2012.03
[7] Kim, S.-W., Kim, E.-H., Rim, M.-S., Shrestha, P., Lee, I., “Structural Performance Tests of Down Scaled Composite Wind Turbine Blade using Embedded Fiber Bragg Grating Sensors,” International Journal of Aeronautical & Space Sciences, Vol. 12, No. 4, pp.346-353, 2011.12
[6] Rim, M.-S., Kim, E.-H., Lee, I., Choi, I-H., Ahn, S.-M., Koo, K.-N., Bae, J.-S., Roh, J.-H., “Low velocity impact characteristics of composite plates with shape memory alloy wires,” Journal of Theoretical and Applied Mechanics, Vol.49, No.3, pp.841-857, 2011.
[5] Kim, E.-H., Lee, I., Roh, J.-H., Choi, I.-H., and Koo, K.-N., “Effects of Shape Memory Alloys on Low Velocity Impact Characteristics of Composite Plate,” Composite Structures, Vol. 93, pp. 2903-2909, 2011.10.
[4] Cho, S.I., Yoo, S.J., Kim, E.-H., Lee, I., Kwon, I.B., and Yoon, D.J., “Strain Transmission Characteristics of Packaged Fiber Bragg Grating Sensors for Structural Health Monitoring,” Journal of the Korean Society for Nondestructive Testing, Vol. 30, No. 3, pp.236-243, 2010.06
[3] Kang, M.K., Kim, E.-H., M.S. Rim, and I. Lee, “Engineering Model to Predict Behaviors of Shape Memory Alloy Wire for Vibration Applications,” CMES-Computer Modeling in Engineering & Sciences, Vol.64, No.3, pp.227-249, 2010.08.
[2] Kim, E.-H., Roh, J.H., Lee, I., “Numerical Analysis of SMA Hybrid Composite Plate Subjected to Low-Velocity Impact,” KSAS International Journal, Vol. 8, No. 2, pp.76-81, 2007.11
[1] Kim, E.-H., Roh, J.H., Yoo, S.J. and Lee, I., “Equivalent Plate Modeling of the Wing-Box Structure with Control Surface”, KSAS International Journal, Vol. 7, No. 2, pp.104-109, 2006.11
Mechanics Lab. for Advanced Structures
Mechanical System Engineering, Jeonbuk National Univeristy