Semi Automatic Mild Steel Vacuum Mixing

TOB-SFM-6E vacuum mixing machine is designed for making large batch of chemical compound via blending and mixing in single container under vacuum driven by electricity only.

The vacuum mixing machine is programmable in speed, time, and rotating direction, and water cold stainless steel tank promise high efficient in mixing

The vacuum mixing machine is excellent for preparing battery electrode, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.

Laboratory Battery Electrode Calendering Roll Heat Press Machine

The machine mainly used for rolling press electrode, battery anode and cathode.

Hot roller press machine is a compact hot rolling press machine mainly serves for pressing samples in the lab or other applications in the material research especially for increasing active material density of the electrode in Li-Ion batteries research after coating.

The hot roller press machine has 100mm width steel rollers. Such a roller can be heated up to 100°C.

Thin Film Doctor Blade Coater Coating Machine With Heat And Vacuum Function

This coater with a heating cover designed to produce films with consistent thickness. Lab Film Coating Machine has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. There is a 100 mm width adjustable micro-meter applicator.

Stainless Steel Stability Chamber

An Environmental Test Chamber, which are known for their optimum quality and excellent performance. These test chambers are appreciated for longer functional life, sturdy construction, easy operation, and low maintenance. These are available in various specifications. These machines are extensively used in various industry applications.

Vaccum Oven (Rectangular type)

This model specially designed for drying & heating under carefully controlled conditions from atmospheric pressure to vacuum up to 30" Hg. Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, purification and out gassing of solids etc.

Ball Milling Machine

Planetary high energy ball milling machine is a device for mixing, fine grinding, sample preparation, and small batches of materials production. The planetary ball mill is compact-designed with high efficiency and low noise. It is a powder processing equipment widely used in scientific research institutions, universities, and enterprise laboratories to obtain fine powder samples. Four samples can be obtained simultaneously in each experiment. Ball mill can be performed in a vacuum when the vacuumed ball milling jars are used.

Hot Air Oven

The Laboratory Hot Air Oven is an aluminum hot air dryer designed to dry samples at maximum of 150 °C. It is made of high quality aluminum and stainless steel. The outer body is made of mild steel duly powder coated. This material allows the oven to have a longer life span and prevents the internal moisture from being transmitted to the external part. The double-walled design helps the oven to have stable performance under various temperatures and reduces the heat loss greatly.

Tubular Furnace

Rapid heat up to operating temperature. Controlled by PID temp. Controller cum indicator with thyristor power pack. Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional work tube and end seals.

Laboratory Centrifuge

A laboratory centrifuge is a rotor driven instrument designed to separate liquid samples at high rates of speeds. The rotation of the centrifuge induces centripetal acceleration and separates substances based on density.

Glove Box

The inert atmosphere laboratory glove box (or glovebox) from Ossila can create and maintain low oxygen and moisture environments for the handling, processing and storage of air sensitive chemicals, materials, and samples.

Using an inert gas such as Nitrogen or Argon, the Ossila Glove Box is capable of producing an atmosphere with oxygen levels consistently below 0.5% and water levels as low as 10 ppm.

Solatron Cell Test System

The Solartron CellTest System is a multi-channel test system designed for the complete DC and impedance characterization of a wide range of energy storage devices such as batteries, fuel cells and super-capacitors.

BIOLOGIC BCS-805 Battery Cycling System

BCS-805 Battery cycling system up to 150 mA per channel Powerful and flexible equipment for battery cycling with EIS capability

Bitrode Battery Tester

Bitrode is an industry leading supplier of state-of-the-art laboratory systems in cell, module and pack testing for all chemistry. Standard product for battery development and testing, as well as custom engineering services, offer our clients maximum control over every aspect of their testing protocols and methods, applications to High Rate Discharge testers .

OrigaLys

Instrument adapted to your needs and applications: system Potentiostats and Galvanostats mono or multi way, impedance, rotating electrode. Suitable for research, teaching or industry.

Neware 8 Channel Battery Analyzer Adjustable Cell Holders & Software

BST8-WA is an eight-channel battery analyzer to analyze small coin cells and cylindrical batteries from 0.005 mA to 5 mA, up to 5V. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software. This system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.

Lab Automatic Film Coater Machine

It is a compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on various types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin film coatings.

Ultrasonic Metal Spot Welding Machine

TMAX-VS-40A is a CE Certified ultrasonic metal welder with touch-screen controller. It is designed for welding stacked electrode foils/sheets and tabs onto current collectors to prepare Li-ion pouch cells & cylindrical cells.

Laboratory electrode stacking machine for pouch cell production line

TMAX-JK200 Battery stacking machine is a semi-automatic stacking machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell.