Embedded Files
This is the cup coaster.
First, we start with the design using CorelDRALX8.
I made the coaster in the shape of my logo.
So I designed the shape and recorded the steps.
To watch the video, use the following link:
https://drive.google.com/file/d/1mI0qGCADGeuuwvJDxn2JseWZKWbr805F/view?usp=drivesdk
AND I will outline the steps in detail.
RECTANGLE TOOL
RECTANGLE TOOL
We will draw a square with dimensions 4 cm × 4 cm.
TEXT TOOL
TEXT TOOL
We will add the required logo using the Text tool.
CONVERT TO CURVE
CONVERT TO CURVE
From the Object menu, select to convert the part to Curves.
This is important so that when using the laser, it follows clear lines and engraves accurately.
CHANGE THE COLOR
CHANGE THE COLOR
We will change the colors to differentiate between engraving and cutting.
KNIFE
KNIFE
We use the Knife tool to remove the excess, but before that, we will align the two letters on top of each other.
KNIFE
KNIFE
Here, we add a line and remove the excess using the same tool.
2-POINT LINE
2-POINT LINE
We use the 2-Point Line tool to draw the logo.
KNIFE AND CIRCLE
KNIFE AND CIRCLE
We use the Knife tool to remove the excess, then start drawing the circles included in the logo.
AFTER DRAW AND EDIT
AFTER DRAW AND EDIT
After drawing and making the necessary adjustments, the final shape will look like this.
Finally, the images were taken from the video that I included at the top of the page.
I used the laser machine myself for engraving and cutting as part of learning.
The final result
The final result
with the logo
with the logo
Page updated
Google Sites
Report abuse