Embedded Files
“The idea of this assignment is to design and build a capsule for an egg so that when it is dropped from a height of 3 meters, the egg does not break.”
“So, we thought about making a capsule slightly larger than the egg. We would place the egg inside it and surround it with clay from the inside to absorb the impact and protect it from breaking.”
“We also added arm-like extensions to the capsule to help absorb the impact.”
“Let’s start the design.”
First step
First step
We will draw an oval shape
Second step
Second step
We will use the Offset tool.
Third step
We draw a line slightly below the center.
Fourth step
Fourth step
Next, draw a line on the offset section.
Step five
Draw a line like this, as shown in the picture.
The sixth step is...
We will notice that a part appears, as shown in the picture.
step seven
we use the Revolve tool to create the 3D shape.
Step eight
Step eight
the same of step 7
Step nine
Step nine
Then, we draw a circle on the surface of the capsule.
Step ten
Step ten
After that, we use the Extrude tool.
the final
the final
Page updated
Google Sites
Report abuse