J.E. Park, S.Y. Jung, T.G. Kang, Robust design of a stacked-filament feed spacer inducing chaotic advection for enhanced reverse osmosis filtration, Journal of Membrane Science 734, 124431, 2025.  doi: 10.1016/j.memsci.2025.124431

Seon Yeop Jung, Jun Dong Park, Jo Eun Park, Jaewook Nam, Tae Gon Kang, Synergistic interaction of thixotropy and inertia in a C-shaped serpentine channel, International Journal of Mechanical Sciences, under 289, 110068, 2025. doi:10.1016/j.ijmecsci.2025.110068 

J.E. Park, S.Y. Jung, T.G. Kang, Chaotic mixing induced by chevron pattern surfaces: Application to reverse osmosis filtration, Chemical Engineering Research and Design 206, 453-468, 2024. doi: 10.1016/j.cherd.2024.05.025

J.E. Park, T.G. Kang, S.Y. Jung, The impact of thixotropic behavior on microfluidic mixing in a staggered-herringbone mixer, Physics of Fluids 36, 042008, 2024. doi: 10.1063/5.0198381 

S.Y. Jung, T.G. Kang, A review on modern variants of the partitioned pipe mixer: designs, performances, and applications, Korea-Australia Rheology Journal, 35, 229–247, 2023. doi: 10.1007/s13367-023-00069-8

J.E. Park, T.G. Kang, S.Y. Jung, Enhanced reverse osmosis filtration via chaotic advection induced by patterned membranes: A numerical study, Desalination 565, 116879, 2023. doi: 10.1016/j.desal.2023.116879

J.E. Park, T.G. Kang, H. Moon, The Effect of the Rotating Disk Geometry on the Flow and Flux Enhancement in a Dynamic Filtration System, Membranes 13 (3), 291, 2023.  doi: 10.3390/membranes13030291 

D. Kim, K. Alam, M.-K. Han, S. Surendran, J. Lim, J.Y. Kim, D.J. Moon, G. Jeong, M.G. Kim, G. Kwon, S. Yang, T.G. Kang, J. K. Kim, S.Y. Jung, H. Cho, U. Sim, Manipulating Wettability of Catalytic Surface for Improving Ammonia Production from Electrochemical Nitrogen Reduction, Journal of Colloid and Interface Science, 633, 53-59, 2023. doi: 10.1016/j.jcis.2022.11.052 

J. Cho, D. Lee, T.G. Kang, H. Moon, Study on Spray Characteristics of Simulant Gel in Pressure Swirl Injector, International Journal of Aeronautical and Space Sciences 23 (4), 794-803, 2022. doi: 10.1007/s42405-022-00504-0   

S.Y. Jung, J.E. Park, T.G. Kang, J.D. Park, Flow and mixing analysis of a thixotropic fluid in a barrier-embedded partitioned pipe mixer (BPPM): a numerical study, International Journal of Heat and Mass Transfer,184, 122310, 2022. doi:10.1016/j.ijheatmasstransfer.2021.122310 

K.T. Kim, J.E. Park, S.Y. Jung, T.G. Kang, Fouling Mitigation via Chaotic Advection in a Flat Membrane Module with a Patterned Surface, Membranes 11 (10), 724, 2021.  doi: 10.3390/membranes11100724 

H.I. Jung, J.E. Park, S.Y. Jung, T.G. Kang, K.H. Ahn, Flow and mixing characteristics of a groove-embedded partitioned pipe mixer, Korea-Australia Rheology Journal, 32, 319-329, 2020. doi: 10.1007/s13367-020-0030-5.

S.Y. Jung, H.I. Jung, T.G. Kang, K.H. Ahn, Fouling mitigation in crossflow filtration using chaotic advection: a numerical study, AIChE Journal, 66(1), e16792, 2020. doi:10.1002/aic.16792

S.Y. Jung, J.E. Park, T.G. Kang, K.H. Ahn, Design optimization for a microfluidic crossflow filtration system incorporating a micromixer, Micromachines, 10(12), 836, 2019. doi:10.3390/mi10120836

H.I. Jung, S.Y. Jung, T.G. Kang, K.H. Ahn, Numerical study on the mixing in a barrier-embedded partitioned pipe mixer (BPPM) for non-creeping flow conditions, Korea-Australia Rheology Journal, 30(3), 227-238, 2018. doi:10.1007/s13367-018-0022-x

D. Lin, T.G. Kang, J.S. Han, S.J. Park, S.T. Chung, Y.-S. Kwon, Experimental and Numerical Analysis of Injection Molding of Ti-6Al-4V Powders for High Performance Titanium Parts, JOM, 70(5), 621-625, 2018. doi:10.1007/s11837-018-2786-3

D. Lin, J.M. Park, T.G. Kang, S.T. Chung, Y.S. Kwon, and S.J. Park, Powder Injection Molding of Ti-6Al-4V Alloy for Defect-Free High Performance Titanium Parts with Low Carbon/Oxygen Contents, Key Engineering Materials, 770, 189-194, 2018. doi:10.4028/www.scientific.net/KEM.770.189

I.D. Jung, T.G. Kang, D.S. Shin, and S.J. Park, Modeling of Magnetic Particle Orientation in Magnetic Powder Injection Molding, Journal of Physics D: Applied Physics, 51(11), 115002, 2018. doi:10.1088/1361-6463/aaa8d3

S.Y. Jung, K.H. Ahn, T.G. Kang, G.T. Park, and S.U. Kim, Chaotic mixing in a barrier-embedded partitioned pipe mixer, AIChE Journal, 64 (2), 717-729, 2018. doi:10.1002/aic.15929

H.E. Kim, K. Kim, T.Y. Ma, and T.G. Kang, Dynamics of Janus magnetic particles in a rotating magnetic field, Korea-Australia Rheology Journal, 29 (1), 17-27, 2017. doi:10.1007/s13367-017-0003-5 

Y. Seong, T.G. Kang, M.A. Hulsen, J.M.J. den Toonder, and P.D. Anderson, Magnetic interaction of Janus magnetic particles suspended in a viscous fluid, Physical Review E, 93 (2), 022607, 2016. doi:10.1103/PhysRevE.93.022607 

I.D. Jung, J.M. Park, T.G. Kang, S.J. Kim, and S.J. Park, Magneto-rheological models for magnetic micro powder injection molding, Computational Materials Science, 100, 39-44, 2015.  doi:10.1016/j.commatsci.2014.11.011 

T.G. Kang and P.D. Anderson, The effect of inertia on the flow and mixing characteristics of a chaotic serpentine mixer, Micromachines, 5 (4), 1270-1286, 2014. doi:10.3390/mi5041270 

D. Kim, D. Lee, Y. Jang, T.G. Kang, B.J. Park, B, Kim, Numerical simulation and channel configuration design for a negative dielectrophoresis based high efficiency cell sorting platform, Journal of Mechanical Science and Technology, 28 (11) 4673-4679, 2014. doi:10.1007/s12206-014-1034-1 

I.D. Jung, J.M. Park, J.-H. Yu, T.G. Kang, S.J. Kim, and S.J. Park, Particle size effect on the magneto-rheological behavior of powder injection molding feedstock, Materials Characterization, 94, 10-25, 2014. doi:10.1016/j.matchar.2014.05.004 

I.D. Jung, S.H. Kim, S.J. Park, S.J. Kim, T.G. Kang, and J.M. Park, Rheological Modeling of Strontium Ferrite Feedstock for Magnetic Powder Injection Molding, Powder Technology, 262, 198-202, 2014. doi:10.1016/j.powtec.2014.04.073 

J. Kim, S. Ahn, S.V. Atre, S.J. Park, T.G. Kang, and R. M. German, Imbalance Filling of Multi-Cavity Tooling during Powder Injection Molding, Powder Technology, 257, 124-131, 2014. doi:10.1016/j.powtec.2014.02.056 

T.G. Kang, Y. Gao, M.A. Hulsen, J.M.J den Toonder, and P.D. Anderson, Direct simulation of the dynamics of two spherical particles actuated magnetically in a viscous fluid, Computers & Fluids, 86 (5), 569-581, 2013.  doi:10.1016/j.compfluid.2013.08.003 

Y. Gao, M.A. Hulsen, T.G. Kang, and J.M.J. den Toonder, Numerical and Experimental study of a rotating magnetic particle chain in a viscous fluid, Physical Review E., 86 (4), 041503, 2012. doi:10.1103/PhysRevE.86.041503 

S.H. Kim, S.J. Kim, S.J. Park, J.H. Mun, T.G. Kang, J.M. Park, Rheological behavior of magnetic powder mixtures for magnetic PIM, Korea-Australia Rheology Journal, 24 (2), 121-127, 2012. doi:10.1007/s13367-012-0014-1 

T.G. Kang, M.A. Hulsen, and J.M.J den Toonder, Dynamics of magnetic chains in a shear flow under the influence of a uniform magnetic field, Physics of Fluids, 24 (4), 038204, 2012. doi:10.1063/1.4704822 

J.-Y. Ho, J.M. Park, T.G. Kang, and S.J. Park, Three-dimensional numerical analysis of injection-compression molding process, Polymer Engineering and Science, 52 (4), 901-911, 2012. doi:10.1002/pen.22157 

J.M. Park, T.G. Kang, and S.J. Park, Numerical Simulation of Hot Embossing Filling Stage using a Viscoelastic Constitutive Model, Korea-Australia Rheology Journal, 23 (3), 139-146, 2011. doi:10.1007/s13367-011-0017-3 

S.J. Park, S. Ahn, T.G. Kang, S.-T. Chung, Y.-S. Kwon, S.H. Chung, S.-G. Kim, S. Kim, S.V. Atre, S. Lee, and R.M. German, Review: Computer Simulations in Powder Injection Molding, International Journal of Powder Metallurgy, 46, (3), 37-46, 2010 

J.G. Lee, B.-K. Lee, T.G. Kang, T.H. Kwon, Experimental and Numerical Study of Transcriptability of Micro Structures in Injection Molding, Polymer Engineering and Science, 50 (6), 1186-1198, 2010. doi:10.1002/pen.21642 

T.G. Kang, M.K. Singh, P.D. Anderson, and H.E.H. Meijer, A chaotic serpentine mixer efficient in the creeping flow regime: From design concept to optimization, Microfluidics and Nanofluidics, 7 (6), 783-794, 2009. doi:10.1007/s10404-009-0437-2 

M.K. Singh, T.G. Kang, A.N. Hrymak, P.D. Anderson, and H.E.H. Meijer, Analysis and optimization of low-pressure drop (LPD) static mixers, AIChE Journal, 55 (9), 2208-2216, 2009. doi:10.1002/aic.11846 

H.E.H. Meijer, M.K. Singh, T.G. Kang, J.M.J. den Toonder, and P.D. Anderson, Passive and Active Mixing in Microfluidic Devices, Macromolecular Symposia, 279 (1), 201-209, 2009. doi:10.1002/masy.200950530

T.G. Kang, S. Ahn, S.J. Park, S.V. Atre, and R.M. German, Mixing simulation for powder injection moulding feedstock: Quantification by the mixing entropy, Powder injection moulding international, 3 (2), 60-63, 2009. Available online via http://www.pim-international.com/ 

M.K. Singh, T.G. Kang, P.D. Anderson, and H.E.H. Meijer, The mapping method as a toolbox to analyze, design, and optimize micromixers, Microfluidics and Nanofluidics, 5 (3), 313-325, 2008.  doi:10.1007/s10404-007-0251-7 

T.G. Kang, M.A. Hulsen, J.M.J den Toonder, P.D. Anderson, and H.E.H. Meijer, A direct simulation method for flows with suspended paramagnetic particles, Journal of Computational Physics, 227 (9), 4441-4458, 2008. doi:10.1016/j.jcp.2008.01.005 

J.M. Park, D.S. Kim, T.G. Kang, and T.H. Kwon, Improved serpentine laminating micromixer with enhanced local advection, Microfluidics and Nanofluidics, 4 (6), 513-523, 2008.  doi:10.1007/s10404-007-0208-x 

T.G. Kang, M.K. Singh, T.H. Kwon, and P.D. Anderson, Chaotic mixing using periodic and aperiodic sequences of mixing protocols in a micromixer, Microfluidics and Nanofluidics, 4 (6), 589-599, 2008. doi:10.1007/s10404-007-0206-z 

T.G. Kang, M.A. Hulsen, P.D. Anderson, J.M.J den Toonder, and H.E.H. Meijer, Chaotic mixing induced by a magnetic chain in a rotating magnetic field, Physical Review E 76 (6), 066303, 2007. doi:10.1103/PhysRevE.76.066303 

T.G. Kang, M.A. Hulsen, P.D. Anderson, J.M.J den Toonder, and H.E.H. Meijer, Chaotic advection using passive and externally actuated particles in a serpentine channel flow, Chemical Engineering Science 62 (23), 6677–6686, 2007. doi:10.1016/j.ces.2007.07.044 

T.G. Kang and T.H. Kwon, Numerical investigations of hot embossing filling characteristics, International Polymer Processing XXII (3), 266–275, 2007. doi:10.3139/217.0029 

T.G. Kang and T.H. Kwon, Colored particle tracking method for mixing analysis of chaotic micromixers, Journal of Micromechanics and Microengineering 14 (7), 891–899, 2004. doi:10.1088/0960-1317/14/7/008