H.J. Lee, S.H. Ko, T.G. Kang, Y. Lee, Validity of the Concept of the Unit Grid Fin by 3-D Calculation of Supersonic Grid Fin Flows, J. Korean Soc. Aeronaut. Space Sci 49 (8), 609-615, 2021. doi: 10.5139/JKSAS.2021.49.8.609
J.S. Kim, J.W. Moon, T.H. Kwak, and T.G. Kang, NUMERICAL INVESTIGATION ON AN OIL COOLING SYSTEM IN THE MOTOR FOR A HYBRID VEHICLE, J. Comput. Fluids Eng., 22(3), 86-94, 2017. Available online via doi: 10.6112/kscfe.2017.22.3.086
H.E. Kim and T.G. Kang, Direct Simulation of the Magnetic Interaction of Elliptic Janus Particles Suspended in a Viscous Fluid, Trans. Korean Soc. Mech. Eng. B, 41(7), 455-462, 2017. Available online via doi: 10.3795/KSME-B.2017.41.7.455
S. Han, S. Ryu, J. Kim, T.G. Kang, H. Moon, J. Kim, and S.W. Ko, Fuel Rich Gas O/F Ratio Characteristics of HDPE and Paraffin Fuel in Low Range of the Oxidizer Mass Flux, Journal of the Korean Society of Propulsion Engineers, 20(6), 54-60, 2016. Available online via doi: 10.6108/KSPE.2016.20.6.054
J.S. Kim and T.G. Kang, MULTI STAGE SHAPE OPTIMIZATION OF CENTRIFUGAL FAN FOR HOME APPLIANCE USING CFD, J. Comput. Fluids Eng., 21(3), 39-47, 2016. Available online via doi: 10.6112/kscfe.2016.21.3.039
J. Kim, D. Jun, T.G. Kang, S.P. Jang, J. Koo, and H. Moon, Rheological Characteristics of Kerosene Gel Fuel with SiO2 Gellant Derivatives, KSPE Journal, 16 (6), 23-31, 2012. Available online via doi:10.6108/KSPE.2012.16.6.023
T.H. Kwon and T.G. Kang, Modeling of numerical simulation in powder injection molding filling process, Journal of Korean Powder Metallurgy Institute 9 (4), 245-250, 2002. (in Korean)
T.G. Kang, S.J. Park, S.T. Chung, S.V. Atre, and R.M. German, Applications of numerical analysis technology in powder injection molding process, Journal of Korean Powder Metallurgy Institute 9 (4), 261-266, 2002.