Level Edge Floor Sanding

Subfloor Preparation Sanding Service

Level sanding of particle board prior to carpet, laminate or hard wood floor installation

Providing a superior quality service to the greater sydney region and beyond for 24 years!

Particle board subfloor sanding service. To comply with Australian Standards 4786.2-2005, builders code and manufacturers recommended tolerances.

SERVICES

FULL SAND

This service is for handover finish if your client (or you) are laying floor coverings, for direct stick flooring or just want the whole floor clean and presentable nearing final stage.

JOINS ONLY SAND

Cost effective and perfect for carpet installations where weather has affected the joins.

SCREW DOWN

Movement will likely cause premature wear in carpet or sponginess in flooring. A screw down can correct this plus greatly reduce creaks and squeaks in your subfloor.

IRREGULAR FLOOR ISSUES

LVL higher than joists, steel beam was capped and sits proud, renovation/extension areas where walls or kitchens pre-existed. Adhesives and other contaminants need removing.

"Over 25,000 dwellings and more than 20 years to fine tune and perfect my skills in this field, I am confident in giving a superior quality service."

The correct tools for the job, the know how and the right mind set to bring the very best service to builders and their clients. Subfloor preparation is so easily overlooked in the building process and can have consequences that are quite costly and inconvenient when they need correcting after floor coverings are installed. "I have seen this first hand, many times, and I am focused on giving you what you need at an affordable price. This, in turn, will have floor coverings last as long as possible!"

Questions?

Contact leveledgefloorsanding@gmail.com to get more information on our services or browse our Facebook link below.

Page updated

Google Sites

Report abuse