2025
A K Naik, G Kallien, G Schell, M Patel, T Laha, S Roy, A comparative study of structural, mechanical and thermal shock properties in ZrB2-B4C-SiC-LaB6 functionally graded and non graded composites, Journal of Alloys and Compounds, 2025, 1036, 182159 https://doi.org/10.1016/j.jallcom.2025.182159
M Sabat, S Maharana, DKVD Prasad, R Sarkar, T Laha, Oxide dispersion strengthened Ni-rich high entropy alloy synthesized via mechanical alloying and spark plasma sintering: Attribution of nano-Y2O3 dispersoid on mechanical properties, Materials Science & Engineering A, 2025, 942, 148662 https://doi.org/10.1016/j.msea.2025.148662
S Maharana, S Biswal, M Sabat, DKVD Prasad, T Laha, Unravelling the deformation mechanisms in Ni-rich high entropy alloy with tailored Ti content: An experimental and atomistic approach, International Journal of Plasticity, 2025, 189, 104346 https://doi.org/10.1016/j.ijplas.2025.104346
N Mohammad, A K Naik, DKVD Prasad, L K Pillari, L Bichler, T Laha, S Roy, Influence of B4C content and particle size on the mechanical properties of Al2O3‐B4C composites, International Journal of Applied Ceramic Technology, 2025, 22(3), e15067 https://doi.org/10.1111/ijac.15067
2024
S Halder, MA Faridi, A Rout, I Panda, SK Nayak, T Laha, Optimization of wetting behavior in plasma sprayed Fe-based amorphous/crystalline coatings resulting improved corrosion inhibition ability, Surface and Coatings Technology, 2025, 495, 131562 https://doi.org/10.1016/j.surfcoat.2024.131562
MA Faridi, SK Nayak, DKVD Prasad, SE Mustafa, DA Babu, J.K.N Murthy, T Laha, Evolution of wear mechanism under different sliding conditions of a Fe-based amorphous coating synthesized by plasma spraying, Journal of Thermal Spray Technology, 2024, 33, 2593-2610 https://doi.org/10.1007/s11666-024-01874-5
S Maharana, M Sabat, DKVD Prasad, T Laha, Development of Single-Phase Ni-Rich High Entropy Alloy with Excellent Strength-Ductility Synergy from Blended Elemental Powder Synthesized Via Spark Plasma Sintering, Materials Science & Engineering A, 2024, 913, 147081 https://doi.org/10.1016/j.msea.2024.147081
DKVD Prasad, MA Faridi, S Bysakh, T Laha, Oxidative wear assisted enhanced wear performance of spark plasma sintered in situ Fe-based bulk metallic glass composites, Wear, 2024, 556-557, 205485 https://doi.org/10.1016/j.wear.2024.205485
A K Naik, S Maharana, L Bichler, T Laha, S Roy, Study of the influence of ZrB2 content and thermal shock on the elastic modulus of spark plasma sintered ZrB2-B4C composites using a non-destructive ultrasonic technique, Journal of the European Ceramic Society, 2024, 44(2), 679-92 https://doi.org/10.1016/j.jeurceramsoc.2023.09.065
2023
S Bajpai, KP Singh, A Bhadauria, T Venkateswaran, T Laha, A Upadhyaya, K Balani, Innovative powder-based wettability evaluation of HfB2-ZrB2-SiC-B4C-CNT composite: Effect of surface roughness and ambient conditions, Surfaces and Interfaces, 2023, 42(A ), 103345
MA Faridi, SK Nayak, DKVD Prasad, A Kumar, T Laha, Effect of microstructure and phase evolution on the wear behavior of Fe-based amorphous/nanocrystalline composite coatings synthesized by plasma spraying, Journal of Thermal Spray Technology, 2023, 32, 2057- 2067
S Maharana, D.K.V.D. Prasad, S Anandhi, M Sabat, T Laha, Effect of sintering parameters on phase evolution, microstructural development and mechanical behavior of Ni 46 Al 12 Co 18 Cr 8 Fe 12 entropy alloy synthesized via mechanical alloying and spark plasma sintering, Materials Science & Engineering A, 886 (2023) 145695, https://doi.org/10.1016/j.msea.2023.145695
DKVD Prasad, I Kumar, SK Nayak, S Bysakh, T Laha, Evaluation of room temperature creep deformation of in situ Fe-based bulk metallic glass nanocomposites by instrumented indentation, Intermetallics, 2023, 161, 107972
A Kumar, SK Nayak, T Laha, Deformation behavior of plasma sprayed Fe-based amorphous/nanocrystalline coating under multi-scale tribological contact, Journal of Non-Crystalline Solids, 2023, 609, 122281
DKVD Prasad, I Kumar, S Bysakh, T Laha, In situ processing of Fe-based bulk metallic glass nanocomposites in supercooled liquid region by spark plasma sintering, Journal of Non-Crystalline solids, 2023, 607, 122231
SK Nayak, A Kumar, T Laha, Fe-based metallic glass coatings by thermal spraying: a focused review on corrosion properties and related degradation mechanisms, International Materials Reviews, 2023, 84(4), 404-485
2022
AK Naik, M Nazeer, DKVD Prasad, T Laha, S Roy, Development of functionally graded ZrB2-B4C composites for lightweight ultrahigh-temperature aerospace applications, Ceramics International, 2022, 48(22), 33332-33339
SK Nayak, MA Faridi, M Gopi, A Kumar, T Laha, Fe-based metallic glass composite coatings by HVOF spraying: Influence of Mo on phase evolution, wear and corrosion resistance, Materials Characterization, 2022, 191, 112149
M Nazeer, P Jana, MJ Oza, KG Schell, EC Bucharsky, T Laha, S Roy, Ultrasonic study of the elastic properties of functionally graded and equivalent monolithic composites, Materials Letters, 2022, 323, 132594
A Sahu, RS Maurya, LK Singh, T Laha, Analyzing the Effects of Milling and Sintering Parameters on Crystalline Phase Evolution and Mechanical Properties of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 Amorphous Ribbons, Acta Metallurgica Sinica(English Letters), 2022, 35, 1043-1054
P Jana, MJ Oza, KG Schell, EC Bucharsky, T Laha, S Roy, Study of the elastic properties and thermal shock behavior of Al-SiC-graphite hybrid composites fabricated by spark plasma sintering, Ceramics International, 2022, 48, 5386-5396
MS Charan, AK Naik, N Kota, T Laha, S Roy, Review on developments of bulk functionally graded composite materials, International Materials Reviews, 2022, 67(8), 797–863
N Kota, MS Charan, T Laha, S Roy, Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties, Ceramics International, 2022, 48, 1451-1483
A Kumar, SK Nayak, T Laha, Comparative Study on Wear and Corrosion Behavior of Plasma Sprayed Fe73Cr2Si11B11C3 and Fe63Cr9P5B16C7 Metallic Glass Composite Coatings, Journal of Thermal Spray Technology, 2022, 31, 1302-1316
2021
SK Nayak, A Kumar, T Laha, Developing an Economical Wear and Corrosion Resistant Fe-based Metallic Glass Composite Coating by Plasma and HVOF Spraying, Journal of Thermal Spray Technology, 2021, 31, 1317-1329
WR Ilaham, LK Singh, A Kumar, T Laha, Effect of thermomechanical treatment on the microstructure and mechanical properties of Si-containing oxide dispersion strengthened reduced activation ferritic steel , Nuclear Materials and Energy, 2021, 28, 101041
P Bijalwan, C Singh, A Kumar, K Sarkar, N Rani, T Laha, A Banerjee, Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 ,at%) coatings in 3.5% NaCl solution, Journal of Non-Crystalline Solids, 2021, 567, 120913
MJ Oza, KG Schell, EC Bucharsky, T Laha, S Roy, Developing a hybrid Al-SiC-graphite functionally graded composite material for optimum composition and mechanical properties, Materials Science and Engineering: A, 2021, 805, 140625
A Kumar, SK Nayak, A Banerjee, T Laha, Multi-scale indentation creep behavior in Fe-based amorphous/nanocrystalline coating at room temperature, Materials Letters, 2021, 283, 128768
LK Singh, A Bhadauria, T Laha, Understanding the effect of bimodal microstructure on the strength–ductility synergy of Al–CNT nanocomposites, Journal of Materials Science, 2021, 56 (2), 1730-1748
2020
A Bhadauria, LK Singh, SK Nayak, T Laha, Tensile deformation behavior and strengthening mechanism in graphene nanoplatelet reinforced bimodal grained aluminum nanocomposite synthesized by spark plasma sintering and hot rolling, Materials Characterization, 2020, 168, 110568
SK Nayak, A Kumar, K Sarkar, A Banerjee, T Laha, Mechanistic insight into the role of amorphicity and porosity on determining the corrosion mitigation behavior of Fe-based amorphous/nanocrystalline coating, Journal of Alloys and Compounds, 2020, 849, 156624
A Sahu, RS Maurya, S Dinda, T Laha, Phase Evolution-Dependent Nanomechanical Properties of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 Spark Plasma-Sintered Bulk Amorphous Composites, Metallurgical and Materials Transactions A, 2020, 51, 5110-5119
A Kumar, SK Nayak, K Sarkar, A Banerjee, K Mondal, T Laha, Investigation of nano-and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-BCP) amorphous coatings, Surface and Coatings Technology, 2020, 397, 126058
A Kumar, SK Nayak, A Pathak, A Banerjee, T Laha, Investigation of nanomechanical deformation behavior in plasma sprayed Fe-based amorphous/ nanocrystalline composite coating via multi-scale indentation and nanotribology, Journal of Non-Crystalline Solids, 2020, 545, 120244
SK Nayak, A Kumar, A Pathak, A Banerjee, T Laha, Multi-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying, Journal of Alloys and Compounds, 2020, 825, 154120
A Sahu, RS Maurya, T Laha, Non-isothermal crystallization behavior of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 melt-spun ribbons, milled ribbon particles and bulk samples consolidated by spark plasma sintering, Thermochimica Acta, 2020, 684, 178486
RS Maurya, A Sahu and T Laha, Nanoindentation study on Al86Ni8Y6 glassy alloy synthesized via mechanical alloying and spark plasma sintering, International Journal of Materials Research, 2020, 111(2), 160-167
2019
RS Maurya, T Laha, The Glassy Structure Formation and Phase Evolution in Mechanically Alloyed and Spark Plasma-Sintered Al-TM-RE Alloys, Journal of Materials Engineering and Performance, 2019, 28(12), 7407-7418
A Kumar, SK Nayak, P Bijalwan, M Dutta, A Banerjee, T Laha, Optimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous/nanocrystalline composite coating, Surface and Coatings Technology, 2019, 370, 255-268
A Kumar, SK Nayak, P Bijalwan, M Dutta, A Banerjee, T Laha, Fe-based amorphous/nanocrystalline composite coating by plasma spraying: Effect of heat input on morphology, phase evolution and mechanical properties, Journal of Alloys and Compounds, 2019, 771, 827-837
WR Ilaham, RS Maurya, T Laha, Investigation of high-temperature oxidation behaviour of Silicon added 14Cr nanostructured ferritic alloys synthesized via mechanical alloying and spark plasma sintering, Materials Research Express, 2019, 6(11), 1150f6
LK Singh, A Bhadauria, T Laha, Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix , Powder Technology, 2019, 356, 1059-1076
S Ghosh, P Das, S Ganguly, S Remanan, TK Das. SK Bhattacharyya, J Baral, AK Das, T Laha, NC Das, 3D-Enhanced High-Performing Super-hydrophobic and Electromagnetic-Interference Shielding Fabrics Based on Silver Paint and Their Use in Antibacterial Applications, Chemistry Select, 2019, 4(40), 11748-11754
Click here for more details of our Publications.
Plasma sprayed Fe-based metallic glass nanocomposite coatings: Multi-scale Tribological and corrosion properties, 2nd International Conference on Processing and Characterization of Materials (ICPCM), NIT Rourkela, India (2019)
Deformation behavior in plasma sprayed Fe based amorphous/nanocrystalline coating, International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM), Chennai, India (2019)
Deformation behavior study of plasma sprayed Fe based amorphous/nanocrystalline composite coating via multi-scale indentation and nanotribology, Nanoyantrika, Trivandrum, India (2019)
Mechanical properties of spark plasma sintered graphene nanoplatelet reinforced aluminum based nanocomposites: Synergistic strengthening effect of nano-grained aluminum and GNPs, 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-10), Xi'an, China (2019)
Deformation behavior in plasma sprayed Fe based amorphous/nanocrystalline coating, 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-10), Xi'an, China (2019)
Development of corrosion and wear resistant Fe based metallic glass protective coating via thermal spraying, Workshop on Research in Steel Technology, IIT Kharagpur, India (2019)
Advanced sintering techniques and nanoparticle consolidation, SHORT TERM COURSE ON POWDER METALLURGY: FUNDAMENTALS, APPLICATIONS AND ADVANCEMENT, NIT Rourkela, India (2019)
Spark plasma and microwave sintering, Advances in powder metallurgy and 3D printing, IIT Kharagpur, India (2020)
Fe-based metallic glass composite coatings by atmospheric plasma spraying: Nano-tribological and corrosion property assessment, Asia Steel 2018, Bhubaneswar, India (2018)
Study of distribution of Al-CNT nanocomposite synthesized via Spark-Plasma sintering, 7TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS (NCPCM), Rourkela, India (2017)
Wear and Corrosion resistant Fe based metallic glass coatings at Tata Steel, Jamshedpur, India (2018)
Click here for more details of our Technical Presentations.