Set the overall thickness of your stock material here
Set the position of the Z axis zero to either the top or bottom of your stock
Add and offset to your Z0 position (either positive or negative) from your position chosen above
Sets the height above your stock that is used for rapid machine movements
TIP: Use SHOW CLEARANCE to see the clearance plane in the Rhino viewportsÂ
The speed in mm per min the the Gcode will tell the machine to rapid between cutting operations
The speed in mm per min the the Gcode will tell the machine to apply to cutting actions
The speed in mm per min the the Gcode will tell the machine to apply to plunging (Z down) actions
Machine/Stock X Length in mm
Machine/Stock Y Length in mm