Embedded Files
Wooden Engineering 16-17.pdf
Notebook Entries:
Notebook Entries:
Construction of Box:
Construction of Box:
First Steps:
Starting Piece of Wood
Starting Piece of Wood
Block of wood with template for cutting.
Begining Cuts
Begining Cuts
The first cuts have been completed with a bandsaw.
Glueing
Glueing
After inside is cut out out, the fram needs to be glued back togerther.
Orignal Drawer Construction
First cuts are made to make the storage in drawer, will be glued back togerther later.
Clamp to hold glueing together.
Finished drawer after sanding and handle.
Drawer fitting into box.
Top Left: Chop saw is used to make sure sides of box are completely flat. Bottom Left Showing curves that sander makes. Right: Box after glued and sanded.
End of Box:
End of Box:
Using a different kind of wood, the end of the box was created after a previos step was missed, this help keep the drawer from only opening from one side. It has been sanded to fit flush with the rest of the box.
Drawer Redesign 1
Drawer Redesign 1
Unsuccessful attempt to create the drawer attached to an end piece of wood to go on the box.
Drawer Redesign 2
Drawer Redesign 2
Was able to devise a system to create a drawer the has an end piece on it. This provides a cleaner look to the box with less visivle glue areas.
Final Sanding and Oil
Sanding
Sanding
Sanding piece that drawer is connected to to line it up with rest of box.
Oil
Oil
Wood oil is used to change the color of the wood but also protect it from damage.
Final Product
Final Product
Final design after many days of hard work.
Page updated
Google Sites
Report abuse