EDITOR OF BOOKS
1) “1998 POWDER METALLURGY WORLD CONGRESS-EDUCATION PROGRAMME" Edited by J.M. Torralba and F. Velasco, October 1998.
2) “New developments in Metals" , Edited by J.M. Torralba. Leganés, Madrid, 2001.
3) “New developments in Modelling and Manufacturing Process Control , Edited by J.M. Torralba. Leganés, Madrid, 2001.
4) “New developments in Powder Technollogy" , Editted by J.M. Torralba. Leganés, Madrid, 2001.
5) “New developments in Polymers and Polymers Matrix Composites" , Editted by J.M. Torralba. Leganés, Madrid, 2001.
6) THERMEC’2003, International Conference on Processing and Manufacturing of Advanced Materials, TRANS TECH PUBLICATIONS. (VOL.1-5), Editted by T. Chandra, J.M. Torralba, T Sakai. Leganés, Madrid, 2001.
7) "Functional and Engineering Materials", Ed. by Cecilia Poletti, José M. Torralba, Mozahir Sapawe, Omar Dahhan and Sinyu Hu, Trans Tech Publishing, 2022
MONOGRAPHS
1. Torralba J.M. "Metal injection molding (MIM) of stainless steel", in "Handbook of metal injection molding", Edited by Donald F. Heaney, Woodhead Publishing, (2012), pp 393-414.
2. Torralba J.M., “Improvement of mechanical and physical properties in powder metallurgy” in “Comprehensive Materials Processing” Edited by Saleem Hashmi, Elsevier, to be published in 2013 (now under edition process).
3. Translation into Spanish of: a) M.F. Ashby, D.R.H. Jones “Engineering materials I. An introduction to properties, applications and design”, Elsevier, 2005, 448 pages b) M.F. Ashby, D.R.H. Jones “Engineering materials 2. An introduction to microstructures, processing and design”, Elsevier, 2006, 490 pages. In Spanish published by Ed. Reverté. (Work done by J. Baselga, J. Bravo, A. Várez, J. González-Benito, B. Levenfel, E. Gordo and J.M. Torralba).
4. Toralba, J.M. “Improvement of Mechanical and Physical Properties in Powder Metallurgy”. Comprehensive Materials Processing (Elsevier), 2014, 3, pp. 281–294.
5. Torralba, J.M., Hidalgo, J. “Metal injection molding (MIM) of stainless steel”. Handbook of Metal Injection Molding, 2019, pp. 409–429.
6. Avaredo,P., Torralba, J.M. García-Junceda, A. “Sintering of High Entropy Alloys: Processing and Properties”. Encyclopedia of Materials: Metals and Alloys (Elsevieer), 2021, pp. 362–371.
7. Campos, M., Torralba, J.M., Casas, R., Cartón-Cordero, M. “Sintering of Superalloys: Processing and Properties”. Encyclopedia of Materials: Metals and Alloys (Elsevier), 2021, pp. 372–382.
PAPERS PUBLISHED IN BOOKS
J.M. Torralba. "Optimización de un proceso de Metalurgia de Polvos. Análisis de los factores influyentes and sus interacciones". PhD Thesis Universidad Politécnica de Madrid. 1985.
J. M. Torralba. "Optimización de nuevos materiales cerámicos y compuestos de matriz cerámica en base al clinker portland". PhD Thesis. Escuela Politécnica Superior del Ejército. 1994.
Different authors “1998 POWDER METALLURGY WORLD CONGRESS-EDUCATION PROGRAMM. Edited by J.M. Torralba and F. Velasco, October 1998.
J.M. Ruiz Prieto, L.E.G. Cambronero, J.M. Torralba and F. Velasco “Manual de Pulvimetalurgia Editado por “Catedra Höganäs de Pulvimetalurgia . 1999.
W.C. Zapata, J. M. Torralba and J.M. Ruiz. "Influence of powders nature on mechanical properties and microstructure of sintered plain carbon steel". Horizonts of Powder Metallurgy, Part II. European Powder Metallurgy Federation. 1986.
W.C. Zapata, J. M. Torralba and J.M. Ruiz. "Comparative study of Cu-Ni-Mo sintered steels obtained from elemental mix and prealloyed powders". Horizons of Powder Metallurgy, Part II. European Powder Metallurgy Federation. 1986.
J.M. Ruiz, J.M. Torralba, J.L. Sánchez, C. Ranninger and W.C. Zapata. "Influence of Molybdenum on properties and microestructure of sintered alloyed steels". En "Sintering'87", vol. 1, pag. 677 a 682. Ed. Elsevier Applied Science (Londres, Nueva York and Tokyo). 1988.
C. Ranninger, J.R. Ibars, A. Torres, M.L. Aparicio, J.M. Ruiz, J.M. Toralba, R.Martínez. "Corrosion test methods study for P/M austenitic stainless steels". En "Sintering'87", vol. 1, pag. 689 a 694. Ed. Elsevier Applied Science (Londres, Nueva York and Tokyo). 1988.
J.M. Ruiz, J.M. Torralba, J.M. Luna and C. Ranninger. "Heat treatments of sintered steels alloyed with nickel. Hardenability". En "Modern Developments in Powder Metallurgy", vol. 21, pag. 301-310. Ed. por Henry H. Hausner, MPIF-APMI (Princeton, New Jersey). 1988.
C. Ranninger, A. Torres, M.L. Aparicio, J.M. Ruiz, J.M. Torralba and R. Martínez. "Corrosion behaviour of P/M austenitic stainless steels". En "10th International Congress on Metallic Corrosion", vol. 5, pag. 241-249. Ed. International Corrosion Council. 1988.
L.E.G. Cambronero, J.M. Torralba and J.M. Ruiz Prieto. "Mechanical properties of Cu-P sintered alloyed steels: study of the copper influence en dimensional changes". En "Science of sintering". Ed. por D.P. Uskokovic et. al., Plenum Press, New York. Pag. 487-494. 1989.
J.M. Torralba, L.E.G. Cambronero and J.M. Ruiz-Prieto. "Viability study of using clinker portland as raw material instructural ceramics manufacturing". Third Euro-Ceramics, vol. 3, pp. 1085-1090. Ed by P. Durand and J.F. Fernández (Fuerza Editora Ibérica, S.L.). 1993.
J.M. Torralba, W. Moreira, L.E.G. Cambronero and J.M. Ruiz-Prieto."Comparative study of P/M duplex stainless steels made from prealloyed and mixed powders".Proceedings of 1993 Powder Metallurgy World Congress, Ed by Y. Bundo and K. Koluge (Ed Japan Society of Powder and Powder Metallurgy), vol. 1, pp. 517-520.
J.M. Torralba, L.E.G. Cambronero, J.M. Ruiz-Prieto, A. Romero and J.Acedo. "Mechanical properties and wear behaviour of mixed P/M high speed steels sintered in N2 -H2 atmosphere". Proceedings of 1993 Powder Metallurgy World Congress, Ed by Y. Bundo and K. Koluge (Ed Japan Society of Powder and Powder Metallurgy), vol. 1, pp. 521-524.
J.M. Torralba, L.E.G. Cambronero, J.M. Ruiz and M.M. das Neves. "Sinterability study of PM M2 and T15 high speed steels reinforced with cemented carbides". Advances in Powder Metallurgy. Pag. 205-218. Ed. por MPIF. 1993.
J.M. Torralba, L.E.G. Cambronero, J.M. Ruiz and M.M. das Neves. "Effects of Alloyed Iron Powders on Properties of P/M T15 and M2-HSS". Advances in Powder Metallurgy. Ed. por MPIF. Pag. 199-211. 1993.
J.M. Torralba, L.E.G. Cambronero, J.M. Ruiz. "Viability Study of Using Clinker Portland as Raw Material in Structural Ceramics Manufacturing".. THIRD EURO-CERAMICS. Ed. Faenza Editrice Iberica S.L., Vol 3, 1993. 1085-1090.
G.F. Bocchini, F. Bonollo A. Tiziani, J.M. Ruiz-Román and J.M. Torralba. "Break-down, by statistical methods, of hardness values measured on different P/M steels". PM'94, vol. 2, pp. 1057-1060. Ed. Les Editions de Physique, Francia 1994.
W. C. Zapata, C.E. da Costa and J. M. Torralba. "P/M high speed steels reinforced with NbC"1. PM'94, vol. 1, pp. 455-458. Ed. Les Editions de Physique, Francia 1994.
J.M. Torralba, L.E.G. Cambronero, F. Velasco and J.M. Ruiz. “Mechanical reliability and properties of sintered clinker portland doped with other ceramic particles , en “Ceramics: Charting the Future , editado por P. Vicenzini, pag. 2092-2098 (1995).
J.M. Torralba, L.E.G. Cambronero, J.M. Ruiz-Román and J.M. Ruiz. “Mechanical reliability and properties of sintered clinker portland . in “Ceramics: Charting the Future , Editado por P. Vicenzini, pag. 953-958 (1995).
C.E. da Costa, W.C. Zapata, José M. Torralba, José M. Ruiz-Prieto and V. Amigó. "P/M MMC's base aluminum reinforced with Ni3Al intermetallic made by mechanical alloying route". Materials Science Forum, vol. 217-222, pp. 1859-1864, Transtec Publications, Suiza, 1996.
José M. Ruiz-Román, J.M. Torralba, L.E.G. Cambronero and F. Velasco. "Mechanical behaviour and optimizing process of metal injection moulding high speed steel AISI M2". Advances in Powder Metallurgy & Particulate Materials, vol. 19, pp. 105-114, Metal Powder Industries Federation, Princeton, EE.UU., 1996.
C.E. da Costa, J.M. Torralba, J.M. Ruiz-Prieto, J.M. Badía, V. Amigó and W.C. Zapata. "P/M 2014 aluminum alloy obtained by mechanical alloying". Advances in Powder Metallurgy & Particulate Materials, Metal Powder Industries Federation, Princeton, EE.UU., 1996.
N. Antón, L.E.G. Cambronero, J.M. Ruiz-Prieto, F. Velasco and J.M. Torralba. "Ceramic and ceramic matrix composites based on clinker portland: sinterability". Key Engineering Materials, vol. 127-131, pp.407-414, Trans Tech Publications, Suiza, 1997.
J.M. Torralba, C.E. da Costa, L.E.G. Cambronero and J.M. Ruiz-Prieto. "P/M aluminum composite reinforced with Ni3Al". Key Engineering Materials, vol. 127-131, pp.929-935, Trans Tech Publications, Suiza, 1997.
E. Gordo, J.M. Torralba, J.M. Ruiz-Prieto and J.C. Ruiz. "Wear and mechanical behaviour of P/M high speed steels with carbide reinforcement". Key Engineering Materials, vol. 127-131, pp.1017-1024, Trans Tech Publications, Suiza, 1997.
N. Candela. F. Velasco and J.M. Torralba. "Study of the mechanical behaviour of Fe-3.5%Mo based sintered steels made through fractography". Journal de Physique IV, vol. 7, C3-1039-1044, Francia, 1997.
J.M. Torralba. "New techniques of processing metal and ceramic matrix composites". Technologies of the materials processing, Ed. U.T. Press, Cluj-Napoca, Rumanía, 1997, pp.133-152.
J.M. Torralba, E. Gordo and F. Velasco. "Wear behaviour of metals and metal matrix composites (MMC's)". Advance processe in surface engineering, Ed. U.T. Press, Cluj-Napoca, Rumanía, 1998, pp 1256-264.
F. Velasco, W.M. Lima, J. Abenojar and J.M. Torralba. “Sinterability study of stainless steel matrix composites reinforced with intermetallics , in Sintering Science and Technology, Ed. by R.M. German, G.L. Messing and R.G. Cornwall, 2000, pp. 21-26.
A. Rubio, E. Gordo, F. Velasco, N. Candela and J.M. Torralba, “Microstructural development and mechanical properties of high speed steels , Key Engineering Materials, vols. 189-191, 2001, pp. 309-314.
F. Velasco, J. Abenojar, W.M. Lima, R. Marcé, J.A. Bas and J. M. Torralba, “Salt spray corrosion behaviour of austenitic stainless steel matrix composites , Key Engineering Materials, vols 189-191, 2001, pp. 346-351.
N. Candela, R. Plaza, M. Rosso, E. Gordo and J.M. Torralba, “Radial crushing strength, microhardness and microstructure of molybdenum alloyed sintered steels , Key Engineering Materials, vols 189-191, 2001, pp. 473-478.
Different authors, “New developments in Metals , Edited by J.M. Torralba. Leganés, Madrid, 2001.
Different authors, “New developments in Modelling and Manufacturing Process Control , Edited by J.M. Torralba. Leganés, Madrid, 2001.
Different authors, “New developments in Powder Technollogy , Editted by J.M. Torralba. Leganés, Madrid, 2001.
Different authors, “New developments in Polymers and Polymers Matrix Composites , Editted by J.M. Torralba. Leganés, Madrid, 2001.
Different authors, THERMEC’2003, International Conference on Processing and Manufacturing of Advanced Materials, TRANS TECH PUBLICATIONS. (VOL.1-5), Editted by T. Chandra, J.M. Torralba, T Sakai. Leganés, Madrid, 2001.
J.M. Torralba, N. Antón and F.J. Velasco. “Introducción a los aceros inoxidables pulvimetalurgicos , “III Seminario de Tecnología Metalúrgica: Aceros Inoxidables , Ed. Por M.N. Salán, A.M. Mateo and J.M. Cabrera, Barcelona, 2001, pp. 131-148.
F. Velasco, R. Navalpotro, N. Candela, E. Gordo, N. Antón and J.M. Torralba. "Wear behaviour of a ferritic stainless steel". Proceedings of 2000 Powder Metallurgy World Congress, Ed by K. Kosuge and H. Nagai (Ed Japan Society of Powder and Powder Metallurgy), Kyoto, Japan, 2000, vol. 2, pp. 1574-1577.
B. Levenfeld, A. Várez and J.M. Torralba, “A modified metal injection process of metal powders using a thermosetting binder . Proceedings of 2000 Powder Metallurgy World Congress, Ed by K. Kosuge and H. Nagai (Ed Japan Society of Powder and Powder Metallurgy), Kyoto, Japan, 2000, vol. 1, pp. 274-278.
M. Campos, S. Kremel, T. Marcu-Puscas, J.M. Torralba, H. Danninger and A. Molinari, “Influence of processing conditions of mechanical properties of steels based on low prealloyed Cr-Mo powders (Astaloy Cr) , Proceedings of 2000 Powder Metallurgy World Congress, Ed by K. Kosuge and H. Nagai (Ed Japan Society of Powder and Powder Metallurgy), Kyoto, Japan, 2000, vol. 2, pp. 907-910.
J.B. Fogagnolo, M.H. Robert and J.M. Torralba, “Aluminium AA 6061 Matrix Composite reinforced with nitrides particles produced by mechanical alloying , Proceedings of 2000 Powder Metallurgy World Congress, Ed by K. Kosuge and H. Nagai (Ed Japan Society of Powder and Powder Metallurgy), Kyoto, Japan, 2000, vol. 2, pp. 1045-1049.
45. D.R. Amador and J.M. Torralba, “Morphological and microstructural characterization of low-alloying Fe powder obtained by mechanical attrition , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1203-1207.46. M. Campos, D. Sanchez and J.M. Torralba, “Sintering behaviour improvement of a low Cr-Mo prealloyed powder steel through Mn additions and other liquid phase promoters , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1265-1272.
N. Antón, J.L. Delgado, F. Velasco and J.M. Torralba, “Influence of alloying ellement additions on tribological behaviour of sintered steels with high content in manganese-nickel , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1273-1279.
D.R. Amador and J.M. Torralba, “Study of PM alloyed steels with Ni-Cu prealloyed powders , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1281-1286.
E. Gordo, E. Parra, E.M. Ruiz-Navas and J.M. Torralba, “Approach to the development of high-carbide content high-speed-steel matrix composites , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1355-1360.
G. Matula, L.A. Dobrzanski, M. Mayoral, A. Varez, B. Levenfeld and J.M. Torralba, “Sintering under different atmospheres of T15 and M2 high speed steels produced by a modified metal injection moulding process . New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1361-1368.
L. Castro, S. Merino, B. Levenfeld, A. Várez and J.M. Torralba, “Mechanical properties and pitting corrosion behaviour of 316L stainless steel parts obtained by a modified metal injection moulding , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1377-1383.
W.M. Lima, F.J. Velasco, J. Abenojar and J.M. Torralba, “Numerical approach for estimate the elastic modulus in MMC’s as function of sintering temperature , New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1641-1647.
M.E. Rabanal, A. Várez, B. Levenfeld and J.M. Torralba, “Magnetic properties of Mg-ferrite after milling process . New Developments on Powder Technology, Ed. By J.M. Torralba, Leganés, Madrid, Spain, 2001, 1749-1755.
Abenojar J; Velasco F; Bas JA; Torralba JM, “Atmosphere influence on sintered 316L austenitic stainless steel matrix composites reinforced with intermetallic and carbide particles , Advanced Materials Forum I (Trans Tech Publications ltd , Switzerland), 230-2 (2002) 102-105.
Campos M; Torralba JM, “Sinterability and properties of Cr-Mo prealloyed low alloy steels Astaloy CrM , Advances in Powder Metallurgy & Particulate Materials, 8 (2002) 15-27.
Bautista A; Velasco F; Campos M; Rabanal ME; Abenojar J and Torralba JM, “Oxidation behaviour of sintered 316L, 434L and duplex stainless steels , Advances in Powder Metallurgy & Particulate Materials, 7 (2002) 134-142.
Fogagnolo JB; Amador D; Morales F; Ruiz-Navas E; Torralba JM, “Powder characterization of Al-Cu produced by mechanical alloying , Advances in Powder Metallurgy & Particulate Materials, 1 (2002) 191-197.
Antón, N; García-Marquez JM; Bas JA; Calero JA; Torralba JM, “Wear phenomena in composite materials copper-graphite Ander current intensity Advances in Powder Metallurgy & Particulate Materials, 8 (2002) 64-73.
Herranz G; Levenfeld B; Varez A; Torralba JM, “Effect of binder composition on rheological behaviour of M2-HSS powder-polymer mixtures for PIM tech , Advances in Powder Metallurgy & Particulate Materials, 10 (2002) 366-378.
Abenojar J; Velasco F; Torralba JM; Marce R; Calero JA; Bas JA, “Effect of refractory element additions on the properties of sintered stainless steels , Advanced Powder Technology III (Trans Tech Publications ltd , Switzerland) 416-4 (2003) 381-385.
Romano P; Lyckfeldt O; Candela N; Torralba JM, “Nitrogen sintering of high speed steel processed by starch consolidation , Advanced Powder Technology III (Trans Tech Publications ltd , Switzerland), 416-4 (2003) 369-374.
Campos M; Kremel S; Puscas TM; Yu Y; Sanchez D; Torralba JM, “Effect of heat treatments on Cr-Mo steels based on Astraloy CrM powder grade with manganese additions , Advanced Powder Technology III (Trans Tech Publications ltd , Switzerland) 416-4 (2003) 82-88.
Bautista A; Velasco F; Campos M; Torralba JM, “Low-temperature and high-temperature corrosion behaviour of powder metallurgical duplex stainless steels , THERMEC'2003 (Trans Tech Publications ltd , Switzerland), 426-4 (2003) 4367-4372.
Herranz G; Levenfeld B; Varez A; Torralba JM; Piemme J; Heaney D; German RM, “Metal injection moulding (Mim) of M2 high speed steel using a polyethylene based binder , THERMEC'2003 (Trans Tech Publications ltd , Switzerland), 426-4 , (2003) 4361-4366.
Gonzalez-Centeno A; Velasco F; Bautista A; Torralba JM, “Oxidation behaviour at high temperature of ferritic stainless steels manufactured by powder metallurgy , THERMEC'2003 (Trans Tech Publications ltd , Switzerland), 426-4 (2003) 4355-4360.
Rabanal ME ; Varez A; Levenfeld B; Torralba JM , “Optimization of the synthesis of soft magnetic materials by mechanochemical process at room temperature , THERMEC'2003 (Trans Tech Publications ltd , Switzerland), 426-4 (2003) 4349-4354.
Campos M; Munoz JJ; Bautista A; Velasco F; Torralba JM , “Ni diffusion process between austenite and ferrite in a sintered duplex stainless steel obtained by powder mixing , THERMEC'2003 (Trans Tech Publications ltd , Switzerland), 426-4 (2003) 4343-4348.
J.M. Torralba, “Polvo eres , Lección inaugural del curso 2003-2004 de la Universidad Carlos III de Madrid, en “Autonomía universitaria y libertad académica II , Ed. UC3M-BOE, 2005.
J.M. Torralba, “Laudatio del Prof. Dr. Randall M. German , Acto de Investidura de Doctor Honoris Causa del Prof. Randall German de la Universidad Carlos III de Madrid el 20 de Febrero de 2004, en “Autonomía universitaria y libertad académica II , Ed. UC3M-BOE, 2005.