** One JIMS CABLE WORLD® HD Starter Kit. ** (Please See Important ((((**Note))))  About Dish Installations At The Bottom Of This Page Before Purchasing This Kit.)

This Kit Includes One Commscope 5 - 1000 MHz SV-2G Digital Series 2-Way Cable Splitter Plus One 1 Foot Coaxial Cable

This kit is designed by JIMS CABLE WORLD so you can attach the 1 Foot Coaxial Cable to the wallplate, then to the Commscope SV-2G Digital Series 2-Way Cable Splitter to eliminate an excess bundle of coaxial cables on your floor or behind your entertainment center. This kit works great with both Cable and Over The Air signal when you need to split a cable from the Wallplate to two separate pieces of equipment such as a cable modem and your home entertainment center, eliminating excess cable at the wallplate or behind the set.

Starter Kit Includes::

1 ~ Commscope SV-2G Digital Series 2-Way Cable Splitter:  ((((See **Note Below))))

1 ~ JIMS CABLE WORLD 1 Ft' (12 Inches) Black Coaxial Cable: (See *Note Below)

Splitter Speifications::

• Nickel Plated Corrosion Protection

• Enhanced Sub-Band Performance

• Low Inter modulation Distortion 

• Capacitor Decoupled

• Flat-End F-Ports 

• 6kV Serviceability

• Double-Thick Plating

• 130 dB RFI Shielding

• Provides Proper RF and Digital Interface

• 3-Way Ground Screw: Hex/Phillips/Slot

Commscope 5 - 1002 MHz SV-2G Digital Series 2-Way Cable Splitter

The SV-2G Digital Series 1 GHz Commscope Brand 2 way Splitter is a state-of-the-art product designed and tested using the most current procedures. New performance features have been incorporated to make the SV-2G Digital Series compatible with the latest digital and return signal path requirements.

1 ~ 1 Foot Coaxial Cable:

 Cable Features::

• Length: 1 Foot Black Tri-Shield Coaxial Cable

• Heavy-Duty 3 GHz Commscope® Tri-Shield Copper Clad RG~6 Coaxial Cable

• F-Type PPC® Brand EX6XLPLUS Compression Connector w/ Nickel-Plated Finish

• Approved For Use With CATV, Antenna, Satellite & Surveillance Installations
  
  

Cable Speifications::

• 18 AWG Copper Clad Steel

• 75 Ohm Digital HD Coaxial Cable

• UL Listed Approved, RoHS Compliance

• CATV (ETL) NEC Article 820

• Jacketed Black Flame Retardant PVC

• CL2 Rated For In-Wall Installation

• 1st Shield: Aluminum-Polymar-Aluminum Shielding - 100%

• 2nd Shield: 34 AWG Aluminum Braid Wire - 77%

• 3rd Shield: Aluminum-Polymar-Aluminum Shielding - 100%

• Insulated Material Diameter: 4.572 mm

• Gas Injected Foam Polyethylene Insulation
  
  

((((**NOTE: This Commscope SV-2G Digital Series 2-Way Cable Splitter is specifically designed for use with CATV, Over The Antenna, Broadband High Speed Cable Internet, Audio and Surveillance Equipment. This splitter may NOT be Dish/Direct TV approved so please verify the frequency of your receiver prior to purchase. Since most satellite equipment uses a power passing splitter/combiner that operates above the 1002 MHz frequency range, this splitter will not work for these applications.))))

*Note: 6 Inch or 1.5 Ft Coaxial Cable May Be Substituted for The 1 Ft Cable At No Additional Charge Upon Buyers Request At The Time Of Checkout.

Made in the U.S.A.

~100% MADE IN THE U.S.A. USING ONLY MATERIALS THAT ARE 100% MANUFACTURED IN THE ~U.S.A.~

~ Something Special From Whitelaw, WI ~ 

~ PART #: 0277427721221