Research

Projects

PI: Jeya Jeevahan & Co-PI: R.B. Durairaj

Budget: Rs. 1,88,380 /-

Agency: Sathyabama Seed Funding.

Duration: 1 year (Nov 21 - Oct 22).

Status: Ongoing.

Research Articles Published

  1. Jeya Jeevahan, “Effectiveness of Particle Swarm Optimization Algorithm for the Fixture Layout Optimization”, International Journal of Applied Engineering Research, 10(1), 2015, pp. 1161-1173.

  2. Mageshwaran. G, Jeya Jeevahan, Ramkumar Raja SK, “Improving the Gear Box fork Quality by using Six Sigma Tools”, Journal of Research in Science, Technology, Engineering and Management (JoRSTEM), 1(1), 2015, pp. 29-34.

  3. R. B. Durairaj, Madhu Chereyala, G. Mageshwaran & Jeya Jeevahan, “Surface roughness and corrosion characterisation of multi-walled carbon-nanotube-reinforced zirconium composite coated over SS316L”, SS316L, International Journal of Ambient Energy, 2016, DOI:10.1080/01430750.2016.1237891

  4. G. Mageshwaran, Satyanarayana Rao Polisetti, Jeya Jeevahan & G. Britto Joseph, “Enhancement of uniform temperature distribution during casting solidification by methoding process, International Journal of Ambient Energy, 2016, DOI: 10.1080/01430750.2016.1222959

  5. G. Britto Joseph, G. Mageshwaran, R. Ajith Kumar, R. B. Durai Raj, Jeya Jeevahan, Mani Kunjan, "Characteristics Studies of Stainless Steel (AISI Type 304L) Welded by ER310L Filler using TIG Welding", International Journal of Chemical Sciences, 14(4), 2016, 2527-2534.

  6. G. Mageshwaran, Jeya Jeevahan, G.Britto Joseph, Teladevalapalli Narasimham, “Lubrication Improvement in Internal Combustion Engines”, International Journal of ChemTech Research, 9(5), 2016, pp. 705-711.

  7. G.Britto Joseph, Jeya Jeevahan, Saikiran, G.Mageshwaran, “Improving Surface Hardness of the Aluminum Plate by Adding Alumina Powder by Friction Stir Process”, International Journal of ChemTech Research, 9(8), 2016, pp. 587-593.

  8. Jeya Jeevahan, G.Britto Joseph, G.Mageshwaran, N.Manikandan, “Experimental investigation of the effect of welding current, voltage and gas flow rate on welding characteristics of TIG welded S31603 material”, Journal of Chemical and Pharmaceutical Sciences, 9(2), 2016, pp. 734-737.

  9. Jeya Jeevahan, M. Chandrasekaran, G. Mageshwaran, G. Britto Joseph, S. Staline, “Investigation of Engine Performance and Emissions of B20 Biodiesel Blend and Effect of EGR on NOx Emissions Reduction”, Journal of Chemical and Pharmaceutical Sciences, 9(4), 2016, pp. 2469-2473.

  10. Jeya Jeevahan, M. Chandrasekaran, G. Mageshwaran, G. Britto Joseph, “Analysis of the effect of geometry of vortex tube on cold side and hot side air stream temperatures”, Journal of Chemical and Pharmaceutical Sciences, 9(4), 2016, pp. 2474-2477.

  11. Britto Joseph G, Mageshwaran G, Kona Rajesh, Jeya Jeevahan, “Study and analysis of welding of dissimilar metals 409 stainless steel and 439 stainless steel by TIG welding”, Journal of Chemical and Pharmaceutical Sciences, 9(3), 2016, pp. 1046-1050.

  12. Mani Kunjan, Jeya Jeevahan, Britto Joseph, Mageshwaran G, Durai Raj RB, and Poovannan A., “Biodiesel Derived from Mango Seed Oil as An Alternative Fuel for Diesel Engines”, Research Journal of Pharmaceutical, Biological and Chemical Sciences, 7(6), 2016, pp. 2137-2143.

  13. Jeya Jeevahan, G. Mageshwaran, G. Britto Joseph, R. B. Durai Raj, R. Thamarai Kannan, "Various strategies for reducing Nox emissions of biodiesel fuel used in conventional diesel engines: A review" Chemical Engineering Communications, 204(10), 2017, 1202–1223. DOI: 10.1080/00986445.2017.1353500

  14. A. Anderson, G. Mageshwaran, Ravi Teja Vulchi, Sivaji Tallapaneni, Jeya Jeevahan, S. Mohan, G. Britto Joseph, "Energy saving in high-pressure reciprocating air compressor", International Journal of Ambient Energy, 2017, DOI: 10.1080/01430750.2016.1269684

  15. G. Mageshwaran, R. B. Durai Raj, G. Britto Joseph, Jeya Jeevahan, Kevin Kuruvilla, Fino Francis, "Computational investigation of flow parameters and efficiency of single and double inlet cyclone separators", International Journal of Ambient Energy, DOI: 10.1080/01430750.2017.1303644

  16. V. Sriram, Jeya Jeevahan, A. Poovannan, "Comparative study of performance of the DI diesel engine using custard apple biodiesel", International Journal of Ambient Energy, 2017, DOI: 10.1080/01430750.2017.1360204

  17. Jeya Jeevahan, R. B. Durai Raj, G. Mageshwaran, V. Sriram, G. Britto Joseph & A. Poovannan, "Design and analysis of internal cooling passage of gas turbine using computational fluid dynamics", International Journal of Ambient Energy, 2017, DOI: 10.1080/01430750.2017.1372810

  18. Jeya Jeevahan, A. Poovannan, V. Sriram, R. B. Durai Raj, G. Maghwaran, G. Britto Joseph "Effect of intake air oxygen enrichment for improving engine performance and emissions control in diesel engine", International Journal of Ambient Energy, 2017, DOI: 10.1080/01430750.2017.1372811

  19. Jeya Jeevahan, M. Chandrasekaran, G. Britto Joseph, A. Poovannan, V. Sriram, "Experimental investigation of the influence of isobutanol addition on engine performance and emissions of a direct ignition diesel engine fuelled by biodiesel blends derived from waste vegetable oil", International Journal of Ambient Energy, 2017, DOI: 10.1080/01430750.2017.1381158

  20. G. Britto Joseph, G. Mageshwaran, Jeya Jeevahan, R. B. Durai Raj, A. Poovannan, "Studies on the effect of temperature and time on the SS 304 surface for the properties degradation of the solar collector", International Journal of Ambient Energy, 2017, DOI: 10.1080/01430750.2017.1399460

  21. G. Mageshwaran, R.B. Durairaj, Jeya Jeevahan, V. Sriram and G. Britto Joseph, "Computational analysis of passive cooling technique applied to a room under naturally induced flow", International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2017, 7(6): 669-678.

  22. V.Sriram, Jeya Jeevahan, G. Mageshwaran, G. Britto Joseph and R.B. Durairaj, "Engine Performance and Emission Characteristics of 1-Octanol Blended Bio-diesel in a Single Cylinder Diesel Engine", International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2017, 7(6): 623-630.

  23. Jeya Jeevahan, M.Chandrasekaran, R.B.Durairaj, G.Mageshwaran, G.Britto Joseph, "A Brief Review on Edible Food Packing Materials", Journal of Global Engineering Problems & Solutions, 1(1), 2017, pp. 9-19

  24. Jeya Jeevahan, M. Chandrasekaran, G. Britto Joseph, R. B. Durairaj, G. Mageshwaran, "Superhydrophobic surfaces: a review on fundamentals, applications, and challenges" Journal of Coatings Technology and Research, 2018, http://link.springer.com/article/10.1007/s11998-017-0011-x

  25. Jeya Jeevahan, S. Lakshmi Sankar, P. Karthikeyan, V. Sriram and G. Britto Joseph, "Comparative Investigation of the Effects of Lower and Higher Alcohols/Bio-Diesel Blends on Engine Performance and Emissions Characteristics of a Diesel Engine", International Journal of Ambient Energy, 2018, https://doi.org/10.1080/01430750.2018.1484809

  26. Jeya Jeevahan, RB Durairaj Sriramanjaneyulu, G Mageshwaran, "Experimental Investigation of the suitability of 1-Butanol Blended with Biodiesel as an Alternative Biofuel in Diesel Engines", Biocatalysis and Agricultural Biotechnology, 2018 (15) 72-77.

  27. R. Sridhar, Jeya Jeevahan and M. Chandrasekaran, "Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine", International Journal of Ambient Energy, 2018, https://doi.org/10.1080/01430750.2018.1443505.

  28. Jeya Jeevahan, M. Chandrasekaran "Effect of Olive oil Concentrations on film properties of edible composite films prepared from Corn starch and Olive oil" Research J. Pharm. and Tech. 11(11) (2018) 4934-4938, DOI: 10.5958/0974-360X.2018.00898.3.

  29. Jeya Jeevahan, G. Britto Joseph, R. B. Durairaj, G. Mageshwaran & V. Sriram (2018): Influence of diethyl ether on engine performance and emissions characteristics of blends of butanol, pentanol or biodiesel (neem oil methyl ester) in a single cylinder diesel engine, International Journal of Ambient Energy, DOI: 10.1080/01430750.2018.1537938

  30. Jeya Jeevahan, A. Anderson, V. Sriram, R. B. Durairaj, G. Britto Joseph & G. Mageshwaran (2018): Waste into energy conversion technologies and conversion of food wastes into the potential products: a review, International Journal of Ambient Energy, DOI: 10.1080/01430750.2018.1537939

  31. V. Sriram, Kondraganti Venkatesh, Lokireddy Charan Tejeswar Reddy, Jeya Jeevahan, G. Britto Joseph, R.B. Durai Raj & G. Mageshwaran (2019): Investigation of effect of fresnel lens on the performance of double slope single basin solar still, International Journal of Ambient Energy, DOI: 10.1080/01430750.2018.1563810.

  32. G Britto Joseph, John Rajan A, Jeya Jeevahan, G Mageshwaran, Influence of Alkaline Treatment on Improving Mechanical Properties of Jute Fiber-Reinforced Epoxy (LY556) Composites, FME Transactions (2019) 47, 83-88, DOI: 10.5937/fmet1901083J.

  33. G.B. Joseph, P.S. Chaitanya, R.V. Kumar, G Mageshwaran, J. Jeevahan, "Effect of Cladding Process Parameters for Mild Steel Surface Treatment", International Journal of Vehicle Structures & Systems, Vol 11, No 4, 2019.

  34. S. Sivasaravanan, P. Booma Devi, M. Nagaraj, J. Jeya Jeevahan & G. Britto Joseph (2019) Influence of Rice Husk Nanoparticles on Engine Performance and Emission Characteristics of Diesel and Neem Oil Biodiesel Blends in a Single Cylinder Diesel Engine, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2019.1693666

  35. G. Britto Joseph, G. NarendraKumar, G. Mageshwaran, Jeya Jeevahan, V. Sriram & R. B. Durai Raj (2019) Optimisation of process parameters for electroless nickel plating on SS316L for refrigeration systems, International Journal of Ambient Energy, 40:8, 863-867

  36. Jeevahan, J. & Chandrasekaran, "Nanoedible films for food packaging: a review", Journal of Material Science, (2019) 54 (19), 12290-12318.

  37. Sorakka Ponnappan Venkatesan, Parthasarathy Natarajan Kadiresh, Nagappan Beemkumar & Jeya Jeevahan (2019) Combustion, performances, and emissions characteristics of diesel engine fuelled with diesel-aqueous zinc oxide nanofluid blends, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2019.1666933

  38. Durairaj, R. B., Mageshwaran, G., Jeyajeevahan, J., Arvind, T., Hemanandh, J., & KOKc, M. (2019). Experimental investigation on surface morphological behavior of hydroxyapatite coatings deposited over metallic biomaterial surfaces using plasma spray process. Digest Journal of Nanomaterials & Biostructures (DJNB), 14(2).

  39. Jeevahan, J., Chandrasekaran, M., & Sethu, A. (2019, October). Influence of nanocellulose addition on the film properties of the bionanocomposite edible films prepared from maize, rice, wheat, and potato starches. In AIP Conference Proceedings (Vol. 2162, No. 1, p. 020073). AIP Publishing LLC.

  40. Jeya Jeevahan and Manoharan Chandrasekaran, “Influence of Nanocellulose Additive on the Film Properties of Native Rice Starch-based Edible Films for Food Packaging”, Recent Patents on Nanotechnology (2019) 13: 222. https://doi.org/10.2174/1872210513666190925161302

  41. Muthukumar K., Durairaj R.B., Mageshwaran G., Jayajeevahan J., Sriram V., Naidu V. (2019) Optimization of Transient State Temperature Distribution Analysis on Diffusion-Bonded Joints of Ti–6Al–4V With SS304L Stainless Steel Alloy. In: Hiremath S., Shanmugam N., Bapu B. (eds) Advances in Manufacturing Technology. Lecture Notes in Mechanical Engineering. Springer, Singapore

  42. Joseph G.B., Valarmathi T.N., Mageshwaran G., Jeevahan J., Sriram V., Durai Raj R.B. (2019) Studies on the Influence of Welding Parameters in Cladding of ERNiCrMo-10 on AISI 4140 Using GMAW Process. In: Hiremath S., Shanmugam N., Bapu B. (eds) Advances in Manufacturing Technology. Lecture Notes in Mechanical Engineering. Springer, Singapore

  43. T. Arunkumar, S. Sunitha, J. Theerthagiri, Jaya Jeevagan, M. Anish & Tetiana Tatarchuk (2018) Effect of Polyurea Coating on Corrosion Resistance Over Mild Steel and Aluminium Substrates for Liquid Storage Applications, Molecular Crystals and Liquid Crystals, 670:1, 60-73.

  44. Jeya, J., Chandrasekaran, M., Venkatesan, S. P., Sriram, V., Britto, J. G., Mageshwaran, G., & Durairaj, R. B. (2020). Scaling up difficulties and commercial aspects of edible films for food packaging: A review. Trends in Food Science & Technology, 100: 210-222.

  45. Durairaj, R. B., Nagaraj, M., Mageshwaran, G., Joesph, G. B., Sriram, V., & Jeevahan, J. (2020). Effect of plasma sprayed α-tri-calcium phosphate (α-tcp) deposition over metallic biomaterial surfaces for biomedical applications. Digest Journal of Nanomaterials and Biostructures, 15(2), 345-358.

  46. Arunkumar, T., Anand, G., Subbiah, R. et al. Effect of Multiwalled Carbon Nanotubes on Improvement of Fracture Toughness of Spark-Plasma-Sintered Yttria-Stabilized Zirconia Nanocomposites. J. of Materi Eng and Perform (2021). https://doi.org/10.1007/s11665-021-05562-1

  47. T, A., M, A., Jayaprabakar, J., Jeevahan, J., & RB, D. (2020). Study on mechanical properties of polyurea coating with various process parameters. Materials Research Innovations, 1–7. doi:10.1080/14328917.2020.1782078

  48. Subramanian, L.S., B. Lakshmi Sharath, Aman Dinodiya, Gaurav Kumar Mishra, G. Senthil Kumar, and Jeya Jeevahan (2021). Development of landmine detection robot, AIP Conference Proceedings 2311, 050008 (2020); https://doi.org/10.1063/5.0034333.

  49. G.B. Joseph, P.S. Chaitanya, R.V. Kumar, G Mageshwaran, J. Jeevahan. (2020). Effect of cladding process parameters for mild steel surface treatment, International Journal of Vehicle Structures and Systems, Vol. 11 No. 4., https://doi.org/10.4273/ijvss.11.4.06

  50. Durairaj, R.B. and Mageshwaran, G. and Prem Anand, T.P. and Jeyajeevahan, J. and Rajasekar, R. (2020). Effect of inlet valve modification using converging tube for single cylinder diesel engine using biodiesel, International Journal of Scientific and Technology Research, 9(2), 2065-2070.

  51. Jayaraj, J.J. and Renugadevi, K. and Prakash, P. and Harish, M. and Kumar, R.D. (2020). Effect of nanocellulose extracted from rice husk on the film properties of native starch based edible films, AIP Conference Proceedings, 2311, https://doi.org/10.1063/5.0033961.

  52. Britto Joseph, G. and John Rajan, A. and Murugesan, G. and Prabhakaran, R. and Jeevahan, J. and Mageshwaran, G. (2020). Enhancement of mechanical properties of alloy steel by GTAW with different purge/shielding gases, FME Transactions, 48(1), 149-154.

  53. Paramasivam, K., Jayaraj, J.J. and Ramar, K. and Subramani, Y. and Ajithkumar, K. and Kabilan, N. (2020). Evaluation of natural fibers for the production of automotive brake pads replacement for asbestos brake pad, AIP Conference Proceedings, 2311, https://doi.org/10.1063/5.0034513.

  54. Venkatesan, S.P. and Jeevahan, J.J. and Hemanandh, J. and Ganesan, S. and Rajakavieswaran, R. and Saravanan, V. (2020). Performance and emission characteristics of diesel engine using waste plastic oil with N-hexanol as an additive, AIP Conference Proceedings, 2311, https://doi.org/10.1063/5.0034393.

  55. Sriram, V. and Kanimozhi, B. and Prakash, S. and Durairaj, R.B. and Mageshwaran, G. and Jeevahan, J. and Sathya, K. (2020). Performance evaluation of room coupled with solar chimney and underground cooling methods, AIP Conference Proceedings, 2283, https://doi.org/10.1063/5.0024906.

  56. Gaikwad, P.U. and Gnanamani, S. and Purusothaman, M. and Sankar, J.L. and Jeevahan, J.J. (2020). Performance evaluation of variable compression ratio engine fueled with biodiesel from waste cooking oil, Indian Journal of Environmental Protection, 40(1), 110-112.

  57. Venkatesan, S.P. and George, S.M. and Anto, C.S. and Jeevahan, J.J. and Ganesan, S. and Purusothaman, M. (2020). Polymer composite solar collector for water heating application, AIP Conference Proceedings, 2311, https://doi.org/10.1063/5.0034418.

  58. George, B.J. and Raju, B.P. and Arsathkhan, J.M. and Jeevahan, J. and Mageshwaran, G. and Sriram, V. and Joy, N. (2020). Study and test the joint of magnesium alloy by friction stir welding, AIP Conference Proceedings, 2311, https://doi.org/10.1063/5.0034389.

  59. George, B.J. and Valarmathi, T.N. and Arvindh, S. and Kumar, L.B. and Jeevahan, J. and Mageshwaran, G. (2020). Study the microstructural joints of AA2024 and AA7075 alloy by friction stir welding, AIP Conference Proceedings, 2311, https://doi.org/10.1063/5.0034380.

  60. Siva, R., Valarmathi, T.N., Samrot, A.V., Jeya Jeevahan, J. (2021). Surface-modified and untreated Cissus quadrangularis reinforced polylactic composite, Current Research in Green and Sustainable Chemistry, 4, 100121.

  61. Brain Wilfer, P., Giridaran, G., Jeya Jeevahan, J., ...Senthil Kumar, G., Thykattuserry, N.J. (2021). Effect of starch type on the film properties of native starch based edible films, Materials Today: Proceedings, 2021, 44, pp. 3903–3907.

  62. Jeya Jeevahan, J., Nithin, R., Pratheep, M., Stanley Abraham, L., Britto Joseph, G. (2021). Effect of graphene oxide coated catalytic converter on detoxification of diesel engine exhaust emissions, Materials Today: Proceedings, 2021, 44, pp. 3898–3902.

  63. Deepak, J. R., Jeevahan, J. J., Ramachandran, D., Suhas, S. S., & Reddy, P. P. (2021). XRD investigation of GTAW, GMAW, LBW and AGTAW Corten A588 grade steel weldments. Materials Today: Proceedings, 47, 4844-4851.

  64. Siva, R., Mobithis, M., Ravichandran, R., Valarmathi, T. N., Jeevahan, J. J., & Sangeetha, M. (2021). Characterization of mechanical, chemical properties and microstructure of untreated and treated Cissus Quadrangularis fiber. Materials Today: Proceedings, 47, 4479-4483.

  65. Joseph, G. B., Krishna, G. C., Sagar, K. V., Raj, R. D., Jeevahan, J., & Sriram, V. (2021). Optimization and parametric analysis of Titanium Grade 2 in EDM using graphite tool as an electrode. Materials Today: Proceedings, 47, 4735-4740.

  66. Joseph, G. B., Deen, S. A., Kumar, D., Jeevahan, J., RB, D. R., & Sriram, V. (2021). Microstructural studies of P91 and SS304L dissimilar welding. Materials Today: Proceedings, 47, 4571-4577.

  67. Venkatesan, S. P., Jeevahan, J., Purusothaman, M., Venkatesh, S., & Vimal, M. R. (2021). Corrosion and mechanical behavior of plasma nitrated metallic biomaterial surfaces. Materials Today: Proceedings, 47, 938-943.

  68. Venkatesan, S. P., Natarajan, K. P., & Jayaraj, J. J. (2022). The empirical correlation between the parameters influencing the performance and emissions of CI engine run by aqueous nanofluid fuel blends using response surface methodology. Petroleum Science and Technology, 1-16.


Journals Acting as Reviewer

  • Trends in Food Science and Technology

  • Journal of Materials Science

  • Journal of Coatings Technology and Research.

  • Energy Sources: Part A.

  • International Journal of Ambient Energy.

  • Applied Surface Science