2024
2024-Handy Prayogo (National Taiwan University of Science and Technology) Thesis: 以高效率動態梯度提升超啓發式搜尋法優化鋼筋混凝土構架材料成本 Dynamic Gradient Boosted Metaheuristic Method For Optimizing Structural Cost of Reinforced Concrete Frames
2012
2012-謝宜宏 Yi-Hung Hsieh (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 離散型可靠度最佳化設計之單目標與多目標演算架構; Computational frameworks for discrete reliability-based design optimization with single and multiple objectives
2025
2025-Nguyen Truong Trong Khang. Thesis: Comparative Analysis of LiDAR and Digital Photogrammetry in 3D Building Model Reconstruction: Applications for Sustainable Development.
2025-Kevin Raharja. Thesis: Metaheuristic Optimization of Advanced Constitutive Model Parameters for Deep Excavation Analysis.
2025-Evelyn Jane Wijayanti. Thesis: Metaheuristic Optimization of Steel Member Grouping for Reduced Weight and Improved Constructability.
2025-邱譯瑩 Yi-Ying Chiu. Thesis: 建築座向與窗口參數化設計之多準則性能最佳化：熱舒適、採光與能源效率的整合 Multi-Criteria Performance Optimization of Building Orientation and Parametric Window Design: Integration of Thermal Comfort, Daylighting, and Energy Efficiency.
2025-賴巧玲 Chiau-Ling Lai. Thesis: 新北市金山區磺溪流域居民災害風險感知與風險感知地圖建構之研究 A Study on Disaster Risk Perception and Risk Perception Map for Residents in the Northern Sulfur Creek Basin, New Taipei City.
2025-錢庭羽 Ting-Yu Chien. Thesis: 超啟發式演算法於預拌混凝土車運輸調度優化之應用 Application of Metaheuristic Algorithms to Optimize Ready-Mix Concrete Truck Scheduling.
2025-鄭謝崴 Hsieh-Wei Cheng. Thesis: 公家機關Y世代土木工程人員工作滿意度、五大人格特質與離職傾向關聯性研究 The Relationships Among Job Satisfaction, Big Five Personality Traits, and Turnover Intention of Generation Y Civil Engineers in Government Agencies.
2025-陳美儒 May-Lu Chen. Thesis: 應用層級分析法探討防水工程選商之關鍵因素 Key Factors for Waterproof Engineering Contractors Using AHP Approach.
2025-黃慧茹 Heui-Lu Huang. Thesis: 專案管理資訊系統對公共工程監造施工查核之品質管理效益探討–以A公司為例 A Study on the Impact of Project Management Information Systems on Quality Management in Public Construction Supervision - A Case Study of A company.
2025-林世貞 Thesis: 都市更新與危險老舊房屋重建之地主權利變換與協議合建及地主委託全案管理之關聯性及差異探討 Exploring the Relationship and Distinctions among Landowner Rights Conversion, Cooperative Development, and Full-Project Management in Urban Renewal and Rebuilding of Hazardous Deteriorated Buildings.
2024
2024-Joshua Wijaya (National Taiwan University of Science and Technology) Thesis: Fuzzy Multi-Mode Resource-Constrained Time-Cost-Resource Leveling Optimization.
2024-尤翊臻 Yi-Jhen You (National Taiwan University of Science and Technology) Thesis: 以階層線性模式探討營造專案管理資訊系統使用意願 Hierarchical Linear Modeling in Exploring the Intention to Use Construction Project Management Information System.
2024-王菁 Ching Wang (National Taiwan University of Science and Technology) Thesis: 多準則建築性能最佳化應用於住宅建物窗口設計 Multi-Criteria Optimization of Building Performance in Residential Fenestration Design.
2024-邱宇辰 Yu-Chen Chiu (National Taiwan University of Science and Technology) Thesis: 以最佳化擴充策略提升電力系統在地震衝擊下之供電可靠度研究 Improving Power System Reliability During Earthquakes by Optimizing Transmission System Expansion.
2024-吳玠晏 Chieh-Yen Wu (National Taiwan University of Science and Technology) Thesis: 鋁模板生產與翻用策略之模擬分析 Simulation Analysis of Production and Reuse Strategies for Aluminum Formwork.
2024-林志昌 Chih-Chang Lin (National Taiwan University of Science and Technology) Thesis: 政府採購稽核與工程施工查核精進作為之探討-以個案機關為例 Advancements in Government Procurement Supervision and Construction Surveillance: A Case Study of Relevant Agency.
2024-王敬堯 Ching-Yao Wang (National Taiwan University of Science and Technology) Thesis: 以國外數量計算規則探討我國工程履約爭議中關於數量爭訟之研究-以土方工項為例 A Study on Quantity Surveying in Engineering Contract Performance Disputes in Taiwan: An Examination of Quantity Litigation Using Foreign Standard Method of Measurement - A Case Study of Earthwork.
2024-李宗桓 Zong-Huan Li (National Taiwan University of Science and Technology) Thesis: 機關與委外監造實務差異探討-以某建築工程大樓為例 Practical Comparisons between Governmental Agencies In-house Supervision and Outsourced Supervision - A Case Study of a Building Project.
2024-楊耘嘉 Yun-Chia Yang (National Taiwan University of Science and Technology) Thesis: 運用DEA評估台灣各特色風景區之經營績效 Evaluating Operational Performance of Distinctive Scenic Areas in Taiwan Using Data Envelopment Analysis (DEA).
2024-楊子瑩 Tzu-Ying Yang (National Taiwan University of Science and Technology) Thesis: 系統鋁模板之成本與效益分析-以北市住宅案為例 Cost and Benefit Analysis of System Aluminum Formwork: A Case Study of a Residential Project in Taipei.
2024-蔡倫 Yukih Nawi Tsai Lun (National Taiwan University of Science and Technology) Thesis: 原住民族地區公有建築物工程常見缺失探討－以原住民族委員會工程施工查核小組為例 Exploring Public Construction Defects in Indigenous Areas- A case study of Council of Indigenous Peoples (CIP) construction inspections.
2024-沈佳賢 Chia-Hsien Shen (National Taiwan University of Science and Technology) Thesis: 上市建設公司土地開發之關鍵成功因素研究-以台中市水湳經貿園區建案為例 Key Success Factors in Land Development for Listed Construction Companies: A Case Study of Taichung Shuinan Economic and Trade Park.
2024-楊郭超 Kuo-Chau Yang (National Taiwan University of Science and Technology) Thesis: 臨軌工程之安全防護預警設施成效之探討-以鳳鳴臨時站工程為例 Effectiveness of Safety Measures in Rail-Side Projects: A Case Study of Fengming Temporary Station.
2023
2023-Jonathan Aloysius Budiman (National Taiwan University of Science and Technology) Thesis: A Unified Framework for High-dimensional Reliability Analysis through Dimensionality Reduction.
2023-Nathaniel Alvin (National Taiwan University of Science and Technology) Thesis: Multi-Resource Allocation and Leveling in Multi-Project Scheduling Problem with Hybrid-Chromosome NSGA-II.
2023-Zahra Alya Darojati (National Taiwan University of Science and Technology) Thesis: Multi-objective Optimization for Decision-making in Pavement Maintenance and Rehabilitation.
2023-Stefan Tjiptowiyono (National Taiwan University of Science and Technology) Thesis: Incorporating Impact of Rain in Scheduling of Building Structures.
2023-徐紹芳 (National Taiwan University of Science and Technology) Thesis: 建築全生命週期碳定價成本分析-以社會住宅為例 Analysis of Carbon Pricing Costs throughout Building Lifecycle-A Case Study on Social Housing.
2023-李笙源 (National Taiwan University of Science and Technology) Thesis: 預鑄構件生產策略之最佳化模擬分析 Optimization and Simulation Analysis of Precast Components Production Strategies.
2023-歐李佳宣 (National Taiwan University of Science and Technology) Thesis: 建築施工損鄰事件之判決實證分析 Judicial Empirical Analysis on Construction Damage to Neighboring Properties.
2023-侯錦棟 (National Taiwan University of Science and Technology) Thesis: 新冠肺炎疫情對營建產業在工程管理與規劃之影響調查 Investigation on the Impact of the COVID-19 Pandemic on Construction Industry in Engineering Management and Planning.
2023-林憶玲 (National Taiwan University of Science and Technology) Thesis: 宿舍空間再利用方案比較-以國立大學宿舍為例 Comparison of Dormitory Space Reutilization Plans: A Case Study of National University Dormitory.
2023-黃佳創 (National Taiwan University of Science and Technology) Thesis: 公共住宅案智慧建築生命周期成本分析-以臺北市公宅為例 Analysis of Life-cycle Costs for Smart Buildings in Public Housing Projects: A Case Study of Taipei City Public Housing.
2023-王瑄如 (National Taiwan University of Science and Technology) Thesis: 以PCM角度探討智慧型社會住宅全生命週期導入BIM之模式及其物業管理效益-以廣慈博愛園區為例 Benefit Analysis of BIM-assisted Lifecycle Facility Management for Smart Social Housing Building from Perspective of PCM：Case Study for Guangci Charity Park.
2022
2022-Yonatan Septian Wijaya (NTUST) (National Taiwan University of Science and Technology) Thesis: Development of Design Methodology for Buckling Self-Restrained Girder (BSRG).
2022-Catherine MIchellie Widjaja (NTUST) (National Taiwan University of Science and Technology) Thesis: Two-level Optimization Model for Earthmoving Operation.
2022-許至良 Jhih-Liang Syu (NTUST) (National Taiwan University of Science and Technology) Thesis: A Study of Improvement of Basic Design Review Using the Example of MRT Project. 政府公共工程基本設計審議問題及精進作法探討-以捷運工程為例.
2022-賴家儀 Chia-Yi Lai (NTUST) (National Taiwan University of Science and Technology) Thesis: Bi-objective optimization of building windows design considering daylight autonomy and energy consuming. 採光與能耗雙重目標最佳化之建築窗口尺寸設計.
2022 傅靖晏 Jing-Yan Fu (NTUST) (National Taiwan University of Science and Technology) Thesis: Hazard Analysis of Critical Infrastructure Subsidence and Inclination and Damage to Underground Pipelines Caused by Soil Liquefaction- A Case Study. 土壤液化引致關鍵設施沉陷傾斜及地下管線損害之危害度分析-以研究區域為例.
2022 李浩廷 Haw-Tyng Li (NTUST) (National Taiwan University of Science and Technology) Thesis: Repetitive Scheduling Optimization Considering Construction Efficiency and Learning Curve Effect. 考慮施工效率及學習曲率之重複性工程排程最佳化.
2022 林垣百 Yuan-Pai Lin (NTUST) (National Taiwan University of Science and Technology) Thesis: 5G Private Network Application and Development Strategy-The Case Study of T Company. 5G專用網路應用與發展策略-T公司個案研究.
2021
2021-Handy Prayogo (NTUST) (National Taiwan University of Science and Technology) Thesis: Improved Surrogate Models for Reliability Analysis: Classification and Prediction.
2021-Andreas Setiawan (NTUST) (National Taiwan University of Science and Technology) Thesis: Automated Design Optimization Framework for Reinforced Concrete Structures Utilizing Symbiotic Organisms Search and ETABS.
2021-Kevin Richard Anggrek (NTUST) (National Taiwan University of Science and Technology) Thesis: Semi-automatic Generation of 3D BIM Model from 2D CAD Drawings using Revit API.
2021-Valentinus Alvin Hodianto (NTUST) (National Taiwan University of Science and Technology) Thesis: Multi-mode Resource Constrained Multi Project Scheduling Problem (MRCMPSP) Optimization with Symbiotic Organisms Search.
2021-Aucky Sugianto (NTUST) (National Taiwan University of Science and Technology) Thesis: Bi-objective Optimization for Rebar Cutting Plan Using Symbiotic Organisms Search.
2021-李紘宇 Hung-Yu Lee (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Using Failure Mode and Effects Analysis to Analyze the Rework Events of Building Construction during Construction Phase; 建築工程施工階段重工事件之失效模式與效應分析.
2021-蔡寶儀 Bao-Yi Tsai (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Embryonic System of Electro-mechanical Equipment Maintenance base on BIM and Cloud Database; 以BIM與雲端資料庫為基礎之機電設備維護系統雛形.
2021-呂孟宸 Meng-Chen Lu (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Damage Detection of a Simply-supported Steel Truss Bridge Using Modified Pseudo-Local Flexible Method; 改良擬局部柔度法 應用於實際橋梁結構損傷診斷之研究 -以簡支鋼桁架橋為例.
2021-林麗茜 Li-Chien Lin (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Research on the development decision-making of green building construction cases -Take urban renewal collective housing as an example; 綠建築建案開發決策之研究 -以都市更新集合住宅為案例.
2021-林伊欣 Yi-Xin Lin (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Comparisons of Completion Settlement system Between Taiwan and Chinese mainland; 臺灣與中國大陸工程竣工結算制度比較.
2021-林千玄 Chien-Hsuan Lin (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Feasibility of applying UAVs to facilitate unmanned smart construction sites-using temporary safety support system as example; 以UAV協助建立無人化智慧工地之可行性實證研究-以安全支撐工項為例.
2021-朱明遠 Ming-Yuan Chu (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Research on Termination of Contract and Re-contract-Take the mechanical and electrical engineering of a new building as an example; 終止契約與重新發包之研究-以某新建大樓機電工程為例
2020
2020-簡良謙 Liang-Chien Chien (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: A Study of Adaptive Reuse Vacant Space as Childcare Facilities; 活化再利用閒置空間為托育設施之研究
2020-張晟 Cheng Jhang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: BIM-based Construction Production History System for Reinforced Concrete Structures; BIM輔助鋼筋混凝土結構體生產履歷系統之建置研究
2020-張祐菁 Yu-Ching Chang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Automated Detection and Alert for Hard Hat Wearing on Construction Site by MRCNN; 以遮罩區域卷積神經網路偵測與警示現地安全帽穿戴狀況
2020-鄧國慶 Kuo-Ching Deng (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Real Effect of Five-day Work Week Policy on Construction Workers; 一例一休政策對營造業勞工實質影響
2020-彭馨葦 Hsin-Wei Peng (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Assisting the processing of curtain wall components with building information model technology; 以建築資訊模型技術協助帷幕牆構件加工
2019
2019-楊宗融 Tsung-Jung Yang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Durability Diagnosis and Maintenance Management System for Reinforced Concrete Buildings Using Building Information Modeling; 建築資訊模型之鋼筋混凝土建築物 耐久性診斷與維護管理系統
2019-曾瑢予 Jung-Yu Tseng (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Decision supporting model for pavement maintenance scheduling; 道路銑鋪排程決策支援模式
2019-余瑞瑜 Jui-Yu Yu (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Installation simulation and maintenance management of semiconductor industry pollution prevention equipment using BIM technology; 應用BIM技術於半導體產業污染防治設備之安裝設計模擬與維護管理
2019-張宜新 Yi-Hsin Chang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Practice of Value Engineering Mechanism–Example of Zuoying Harbor the combination of Trestle Bridge and Piled dock C3; 價值工程機制運用在工程整建上之研究-以左營軍港棧橋及版樁複合碼頭C3為例
2018
2018-黃紹閔 Shao-Min Huang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: Graphical scheduling algorithm for construction projects; 圖像式重複性工程排程演算法
2018-張琪蓉 Chi-Jung Chang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: The Real Estate Valuation Model of Apartment Buildings in the Eastern and Western Parts of Taipei City; 不動產估價模型建立-以台北市東西區公寓為例
2017
2017-孫睿宏 Jui-Hung Sun (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 三維雷射掃描應用於深開挖工程之連續壁變形監測; Applying 3D Laser Scanning to Monitor Displacement of Diaphragm Walls in Deep Excavation
2017-王浚宇 Shi-Chi Huang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 公共工程估算碳排放量模式之研究-以野溪整治工程為例; Estimation Model of Carbon Dioxide (CO2) Emissions for Public Construction - Taking Creek Engineering as an example
2016
2016-林楷崴 Kai-Wei Lin (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 基於共享經濟與物聯網技術之適地性二手物品交易平台; Location-based Second-hand exchange platform by implementing sharing economy and IoT technique
2016-黃詩琪 Shi-Chi Huang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 開發BIM程式產出建築鋼筋數量估算報表之研究; Development of BIM API for quantity take-off of structural steel rebars
2015
2015-陳韋翰 Wei-Han Chen (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 室內火災逃生導引行動應用程式; Mobile application for interior fire escape guiding
2015-梁榕 Jung Jung (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 工地防護裝置鬆脫預警通報系統之建置; Warning system for monitoring unsecured protection devices for hazard prevention in construction site
2015-Willy Husada (印尼籍,臺灣科技大學) (Indonesian, National Taiwan University of Science and Technology) Thesis: Comparative Study on Data Mining Methods in Structural Reliability Prediction
2014
2014-陳世焯 Shih-Cho Chen (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 加勁擋土牆可靠度最佳化設計; Reliability-Based Design Optimization of Geosynthetic-Reinforced Soil Walls
2014-董亞哲 Ya-Che Tung (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 混合超啟發式演算法與經驗法則求解多專案有限資源排程問題; hyGPH for resources constrained multi-project scheduling
2013
2013-劉羽書 Yu-Shu Liu (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 以粒子群演算法自動調校最小二乘支援向量機分類之參數; Tuning the parameters of Least Squares Support Vector Machine using Particle Swarm Optimization
2013-傅英齊 Ying-Chi Fu (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 平行最佳化運算應用於維護管理-以鋼筋混凝土建築物為例; Parallel computing framework for life-cycle maintenance optimization of RC buildings
2012
2012-游崇韋 Chong-Wei You (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 極端氣候下避難疏散路徑規劃-以台北市為例; Evacuation route planning for disaster caused by extreme climate
2012-張恆欣 Heng-Hsin Chang (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 離散型可靠度最佳化設計之平行處理架構; Parallel Programming Paradigms for Reliability-based Design Optimization with Discrete Design Variables
2012-Phuoc-Thai Huynh (越南籍,臺灣科技大學) (Vietnamese, National Taiwan University of Science and Technology) Thesis: Factors affecting safety management in Vietnamese construction industry
2011
2011-李品毅 Pin-Yi Lee (臺灣科技大學) (National Taiwan University of Science and Technology) Thesis: 以平行計算加速相關性模擬之誤差校正演算法-以估價排程為例; Using parallel programming paradigms to reduce errors of correlated simulation in estimation and scheduling
2011-Ninh Duong (越南籍,臺灣科技大學) (Vietnamese, National Taiwan University of Science and Technology) Thesis: Optimizing the schedule of dispatching RMC trucks in a multi-objective context
2011-Hendramaji Al Ngangeni (印尼籍,臺灣科技大學) (Indonesian, National Taiwan University of Science and Technology) Thesis: Using Bayesian Belief Networks in quantifying cost overrun risk
2010
2010-龔力歐 Li-Ou Kung (臺灣科技大學)(National Taiwan University of Science and Technology) Thesis: 應用平行計算於考量風險之多目標橋梁維護策略最佳化; Parallel Computing Framework for Optimizing Multi-Objective Risk-based Bridge Maintenance Strategies
2010-詹善任 Shan-jen Chan(臺灣科技大學)(National Taiwan University of Science and Technology) Thesis: 以四種超啟發式演算法進行桿件挫屈可靠度最佳化設計之比較; Comparison among four meta-heuristics for reliability-based design optimization with buckling constraints
2010-楊子毅 Tzu-I Yang (臺灣科技大學)(National Taiwan University of Science and Technology) Thesis: 應用粒子群演算法調校層級分析法之權重矩陣以協助選商決策; Application of Particle Swarm Optimization to Justify the Weighting Matrix of Analytical Hierarchy Process for Contractor Selection
2009
2009-莊賢文 Hsien-wen Chuang (臺灣科技大學)(National Taiwan University of Science and Technology) Thesis: 基因演算法在管網系統規劃設計之應用; Application of Genetic Algorithms in Storm Sewer System Design
2009-簡尚彬 Shang-bin Chien (臺灣科技大學)(National Taiwan University of Science and Technology) Thesis: 應用改良式基因演算法求解鋼筋裁切最佳化問題; Improved Constraint Handling in Optimization of Steel Bar Cutting Plan
2009-銀徽 Hui Yin (臺灣科技大學)(National Taiwan University of Science and Technology) Thesis: 以超啟發式法則進行鋼筋混凝土結構最佳化設計; Using Metaheuristics to Facilitate the Design of Reinforced Concrete Structures
2007
2007-賴偉誠(淡江大學)(Tamkang University) Thesis: 評估及優選推進工法應用於污水下水道之系統; Evaluation and selection analysis of the Jacking methods applied to sewerage systems
2007-林長平(淡江大學)(Tamkang University) Thesis: 滿足安全性需求之工程設施配置模式; A construction site layout model considering safety requirement
2007-李冠廷(淡江大學)(Tamkang University) Thesis: 質群演算法應用於鋼筋裁切最佳化問題之研究; Using Particle Swarm Optimization to plan of cutting steel bars
2007-李煥金(淡江大學)(Tamkang University) Thesis: 消波塊工程進度最佳化之研究; Optimizing construction schedule of armored concrete blocks
2006
2006-陳柏村(淡江大學)Po-Chun Chen (Tamkang University) Thesis: 質群演算法於組合型時間成本最佳化問題之研究; Using PSO to solve combinatorial time-cost trade-off problems
2006-謝文仁(淡江大學)Wen-Ren Hsieh (Tamkang University) Thesis: 考慮共變異因子之BOT專案財務評估模式; Impact of inter-factor correlations in BOT financial model
2006-魏鈞宏(淡江大學)Chun-Hung Wei (Tamkang University) Thesis: 電腦模擬系統中具共變異性之作業參數影響評估模式; Impact of Correlated Activity Parameters on Computer Simulation Results
2006-簡豐昱(淡江大學)Feng-Yu Chien (Tamkang University) Thesis: 從BOT案論公共工程與民眾陳情案件之處理---以台灣南北高速鐵路為例; Review of public's stating and pleading cases in BOT projects: An empirical study on Taiwan High-speed Rail Project
2005
2005-郭寶婷(淡江大學)Bau-Ting Kuo (Tamkang University) Thesis: 石材業之系統動態學應用模型研究－以二次加工廠為例S; ystem Dynamic Model for Taiwan Stone Industry
2004
2004-傅正輝(朝陽科大)Cheng-Huei Fu (Chaoyang University of Technology) Thesis: 作業相關性對總工期不確定影響之評估模式; An analytical model for evaluating aggregated impact of correlated activity durations
2004-張芷宜(朝陽科大)Chi-Yi Chang (Chaoyang University of Technology) Thesis: 運用機率限制規劃求解資源及資金供給不確定條件下之重複性工程排程問題; Chance-constrained programming model for repetitive project scheduling under stochastic resource and funding supply
2004-李增源(朝陽科大)Tseng-Yuen Li (Chaoyang University of Technology) Thesis: 重複性工程工期成本權衡之不確定性評估模式; Stochastic optimization for time-cost tradeoff problem in repetitive projects
2003
2003-林蔚菁(朝陽科大)(Chaoyang University of Technology) Co-chaired Thesis: 系統模擬於鋼筋供應鏈管理之研究; A study of system dynamic model in steel supply chain management