THESIS:   Cold-Formed Steel Built-up columns

THESIS:  Bolted connections in cold-formed steel portal frames

THESIS: Cold-Formed Steel Shear wall under In-plane shear loading

THESIS: Fire Performance of Cold-formed steel connections 

THESIS: Cold formed Steel Modular built-up Section 

THESIS: cold-formed steel built-up sections using cold metal transfer (CMT) welding

THESIS: Eccentrically loaded CMT welded CFS built-up columns

THESIS: cold-formed steel built up columns with stiffeners

THESIS: cold-formed steel deck sheets

Mr. Nagaraju Mallepogu

(2018-2024)

Dr. Senthilkumar Govindan

(2015-2020)

 Assistant Professor at SRM Easwari Engineering College, Ramapuram, Chennai, Tamil Nadu INDIA

Dr. Vijayakumar Natesan

(2015-2020)

Assistant Professor at Madanapalle Institute of Technology and Science, Andhra Pradesh, INDIA

Dr. Sivaganesh Selvaraj

(2013-2019)

Research Assistant Professor at The Hong Kong Polytechnic University, HONG KONG,CHINA

Mr. Siddharth S

CE24MTECH02001

THESIS: Wind Uplift Performance of Cold-Formed Steel Roofing Systems 

Mr. Venketa Saravanan K

CE25MTECH02001

THESIS: Effective Bracing systems for Bridges.

Mr. Naveen  A

CE25MTECH02005

THESIS: Cold-formed steel connections

Mr. Akash Narayan Deka

(2023 to 2025)

THESIS:  Face to Face welded CFS sections using Cold Metal Transfer Welding

Mr. Naveen S

(2023 to 2025)

THESIS:Apex connections in cold-formed steel portal frames

Ms. Anusha Naik

(2022 to 2024)

THESIS:  Cleat Angle Behaviour In C-Shaped Purlin-To-Rafter Connection

Mr. Pranay Singh

(2021-2023)

THESIS: Cold-formed steel built-up beam splice connections using flange strips and web cleat

Mr. Deepak Rathood

(2021-2023)

THESIS: Numerical modelling of Two bolted cold-formed steel clip  angles subjected to pull-through failure

Mr. Surya Chandan

(2021-2023)

THESIS:  Numerical investigation of cold formed steel sleeve connection for channel sections subjected to combined bending and shear

Mr. Aditya Choudhary

(2021 to 2023)

THESIS: Investigation of sheathing faster connection failure in CFS wall panel under cyclic loading

Mr. Leo Alfin Terry

(2021 to 2023)

Mr. Monish S

(2020 to 2023)

THESIS:  Experimental and Vibration Analysis of Sustainable Lightweight Composite Slabs

Ms. Haripriya K

(2020 to 2023)

THESIS:  Experimental investigation and design consideration on pull-through capacity of C-shaped and Z-shaped purlin section

Ms. Indira N

(2020 to 2023)

THESIS:  Numerical Analysis of Cold-Formed Steel roof system subjected to wind uplift.

Mr. Gaurav Somnath Chobe

(2019 to 2020)

THESIS:  Retrofitting of Hot Rolled Steel Beams using Cold Formed Steel Channel Sections

Mr. Bharath Shanmugasundaram

(2018 to 2021)

THESIS:  Effectiveness of CFS web cleat bolted connections between beam–to–column 

Ms. Pabbe Swaroopa Rani

(2017 to 2019)

THESIS:  Buckling Strength of cold formed steel columns with imperfections

Mr. Nerella Sai Bhanuprakash 

 (2016 to 2018 )

THESIS: Flexural Studies on High Strength Steel

Ms. Sireesha Thatavarthi 

(2015 to 2018)

THESIS: cold-formed steel and hot-rolled parallel flange steel sections  

Mr. Vinoth Kumar

 (2014 to 2016)

THESIS:  Crack Limiting in structrual steel

Mr. Jofin George

(2013 to 2015)

Mr. Shasidhar

(2013 to 2015)

Mr. Sanap Vishwanath 

 (2012 to 2014)

THESIS: CFRP Reinforced Angle Sections 

Mr. Jaswanth Sai

(2012 to 2014 )

THESIS:  A Numerical Study on Combined Effect of Crack Stop Hole and CFRP Patch as a Repair Technique