SAE STANDARD
RATINGS: TYPE “S” / J759
BRAKE LIGHTS AS PER THE BAJA RULE BOOK
SAE RATING ENGRAVED ON THE LIGHT
PRICE: Rs.2500/-
According to the BAJA SAE Rule book B.10.4.1.1 - Required Brake Light. Only the following brake lights are permitted along with Indian OEM Brake lights.
The car must be equipped with red brake light. The brake light itself has to have a black background and a rectangular, triangular, or near-round shape with a minimum shining surface of at least 15cm².
- COLOR: RED
- INDIAN OEM
- SHINING SURFACE MORE THAN 15 CM²
- AIS STANDARD
According to the BAJA SAE Rule book B.10.4.2 SAE “R” on the lens of the reverse light and be of an LED design, equal to or exceeding the SAE standard J759
SAE “R” RATED REVERSE LIGHTS AS PER THE BAJA RULE BOOK
- AMBER FLASHING LIGHT
- 360⁰ VISIBILITY
- >350 LUMENS/UNIT
- IP65 RATED
- FREQUENCY: 2 Hz – 5 Hz
- 12 W
PRICE: Rs.5000/-
- AMBER FLASHING LIGHT
- 360⁰ VISIBILITY
- 400 LUMENS/UNIT
- IP65 RATED
- FREQUENCY: 4 Hz
- 12 W
- VERY EASY TO INSTALL ON 2 NUTS AND BOLTS
SAE “J994” RATED REVERSE ALARM
- NOMINAL VOLTAGE: 9-48 V
- SOUND PRESSURE LEVEL dB (A): 110
PRICE: Rs.2000/-
IC4.3 Cockpit-mounted Master Switch as per SUPRA SAEINDIA rule book
KILL SWITCH OR EMERGENCY BUTTON, ALWAYS OPEN PUSH TYPE
OPERATES ON <= 15V DC
E-STOP TYPE
AS PER ISO 13850
PRICE: Rs.3000/-
Rotary Kill Switch/ Shutdown Button/ Cockpit Shutdown Button
This is a push rotate type kill switch. It is used in case of an emergency to disconnect the circuit. The mushroom head is 40mm in diameter.
Details - 1. Material - Plastic 2. Category - Electrical 3. Weight - 72 gms
Ratings- 1. Ith:10A 2.Ui: 600V 3.Uimp:6kv 4.240V-3A
Things Included - 1.Switch top x 1 2. NC element x 1
- PUSH TO KILL & ROTATE TO ENERGIZE
- ALWAYS OPEN, PUSH BUTTON
- E-STOP TYPE AS PER ISO- 13850
- OPERATES ON <=15V DC
- EASY INSTALLATION THROUGH SCREW TERMINALS
- KILL SWITCH/ DEAD MAN'S SWITCH
- FOR EMERGENCY SHUT DOWN OF THE ENGINE AS A SAFETY MECHANISM
- ROTARY RECOMMENDED FOR FORMULA STUDENT, GOKARTS ETC.
This switch is used as a starter switch. The circuit is closed as long as the switch is pressed.
Details -
1. Material: Plastic
2. Category - Electrical
3. Weight - 54 gms
Ratings-
1. Ith:10A
2.Ui: 600V
3.Uimp:6kv
4.240V-3A
Things Included -
1.Switch top x 1
2. NO element x 1
FSAE: It is mounted near the steering wheel for starting the engine.
- PUSH TO KILL & ROTATE TO ENERGIZE
- ALWAYS OPEN THE PUSH BUTTON
- E-STOP TYPE AS PER ISO- 13850
- WIDTH 50 mm
- OPERATES AT <=15 V DC
- EASY INSTALLATION THROUGH SCREW TERMINALS
- USED TO SHUT OFF THE ENGINE IN AN EMERGENCY
According to BAJA SAE India Rulebook B.10.3
NORMALLY OPEN
AS PER BAJA RULE BOOK
SKI-DOO RECOMMENDED FOR ATV/MINI BAJA VEHICLES
PRICE: Rs.1899/-
This is a mechanical switch of the rotary type, with a red, removable handle (50mm width). It is generally used to disconnect the battery from the circuit.
Details - Brand - Hella
Material - Plastic
Category - Electricals
Weight - 135 gms
Things Included - 1. Main Body x 1
2. Key x 1
3. M10 thin nut x 2
4. M10 Split Washers x 2
Features- 1. For battery main lead.
2. Connection to either positive or negative lead.
3. Switch key removable in 'off' position only.
4. Current supply interrupted when key removed.
5. M10 screw contacts.
6. 2 switch positions: 0= off, 1=on
7. Max load:
8. 1000A at 12V (10 sec.), 500A at 24V (10 sec).
9. IP Rating: DIN 40 050 - IPX2
FSAE - It is located on the right side of the vehicle and in proximity to the main hoop. It satisfies the rule T11.2.1 mentioned in Formula Bharat 2023 rule book. Other Names: Battery cutoff switch, master switch, shutdown switch, cutoff switch, Tractive System Master Switch (TSMS) . - Located in proximity to the main hoop of the vehicle - As per the rule T11.2.1 of the Formula Bharath Rule Book 2023
FUNCTION: - BATTERY MASTER DISCONNECT SWITCHES ALLOW INTERRUPTION OF THE MAIN FEATURES: - ROTARY-TYPE SWITCH - BATTERY CABLE FOR EFFECTIVE PROTECTION CONNECTION TO EITHER POSITIVE OR NEGATIVE CABLE - SWITCH KEY CAN BE REMOVED IN THE OFF POSITION ONLY - CURRENT SUPPLY IS INTERRUPTED WHEN THE KEY IS REMOVED - M10 SCREW CONTACTS - MAX CONTINUOUS LOAD: 1000 AMPS AT 12V FOR 10 SECONDS - WIDTH: 57mm
This is a mechanical switch of the rotary type, with a red, removable handle (50mm width). It is generally used to disconnect the battery from the circuit, ignition, and other circuits.
Details - Material - ABS Plastic
Category - Electricals
Weight - 188gms
Things Included - 1. Main Body x 1
2. Key x 1
3. M10 nut x 2
4. M10 Split Washers x 2
5. M10 Washers x 4
6. Protective Cap x 1
7. Resistor x 1
Features- 1. For disconnecting the battery, ignition, and other circuits. 2. Switch key removable in 'off' position only. 3. Current supply interrupted when key removed. 4. M10 screw contacts. 5. 2 switch positions: 0= off, 1=on 6. The terminals and resistor allow the switch to be wired so the alternator is not damaged on switch off. 7. Removable 50mm red colored handle. 8. Rubber cover to prevent dust to enter. 9. The Key has a small hole for the pull cable.
FSAE - It is located on the right side of the vehicle and in proximity to the main hoop. It satisfies the rule T11.2.1 mentioned in Formula Bharat 2023 rule book.
Other Names: Battery cutoff switch, master switch, shutdown switch, cutoff switch, Tractive System Master Switch (TSMS), FIA battery cutoff switch. - Universal 6-Pole battery cut-off switch offers 3 sets of contacts for vehicles with alternators. Primary contacts disconnect the battery, while the secondary contacts disable the ignition coil and short the alternator to ground. - Includes a 3-ohm resistor (to help protect the alternator). - Weather-proof cover. - Removable red key (remote cable compatible). - Rated for 100 Amps of continuous duty, and 500 Amps peak.
DETAILS -
Material: Plastic
Category - Electricals
Weight - 15 gms
THINGS INCLUDED -
1. Key x 1
PRICE: Rs.5500/-
IC4.2 Primary Master Switch as per SUPRA SAEINDIA rule book
FUNCTION:
- FOR DISCONNECTING THE BATTERY, IGNITION, AND OTHER CIRCUITS
- INCLUDES MAIN BODY X 1, KEY X 1, M10 NUT X 2, M10 SPLIT WASHERS X 2, M10 WASHERS X 4, PROTECTIVE CAP X 1, RESISTOR X 1
FEATURES:
- WORKING VOLTAGE: 12 V/24V, WITHSTANDS CURRENT: 200A
- FIA-APPROVED SWITCH
- MADE OF ABS PLASTIC
- WEIGHT - 188GMS
- SWITCH KEY REMOVABLE IN THE 'OFF' POSITION ONLY
- CURRENT SUPPLY INTERRUPTED WHEN KEY REMOVED
- M10 SCREW CONTACTS
- 2 SWITCH POSITIONS: 0= OFF, 1=ON
- THE TERMINALS AND RESISTOR ALLOW THE SWITCH TO BE WIRED SO THE ALTERNATOR IS NOT DAMAGED ON SWITCHING OFF
- REMOVABLE 50MM RED COLORED HANDLE
- RUBBER COVER TO PREVENT DUST TO ENTER
- THE KEY HAS A SMALL HOLE FOR THE PULL CABLE
PRICE: Rs.460/-
FUNCTIONS:
- IT IS USED TO OPEN THE CIRCUIT BY PRESSING THE SWITCH. - USED TO DISCONNECT POWER TO LIGHTS, MUSIC SYSTEMS, MOTORS, IGNITION, ETC.
FEATURES:
- THE BRAKE OVER-TRAVEL SWITCH IS A MECHANICAL SINGLE POLE, SINGLE THROW TWO-POSITION SWITCH: PUSH-PULL OR FLIP TYPE - CURRENT RATING: UPTO 45 AMPS
FUNCTIONS:
- IT IS USED TO OPEN THE CIRCUIT BY PRESSING THE SWITCH. - USED TO DISCONNECT POWER TO LIGHTS, MUSIC SYSTEMS, MOTORS, IGNITION, ETC.
FEATURES:
- THE BRAKE OVER-TRAVEL SWITCH IS A MECHANICAL SINGLE POLE, SINGLE THROW TWO-POSITION SWITCH: PUSH-PULL OR FLIP TYPE - CURRENT RATING: UPTO 45 AMPS
PRICE: Rs.1500/-
B.10.4.1.3 - Brake Light Switch The brake light shall be activated only by a hydraulic pressure switch installed in the brake hydraulic lines.
- NO MODIFICATIONS REQUIRED
- SUITABLE VEHICLE GO-KART, ATV, QUADBIKE, AND FSAE/SUPRA VEHICLES
- POWER 12-VOLT DC
- MATERIAL BRASS TERMINALS
- WEIGHT 50 GRAMS
PRICE: Rs.6500/-
- MAX PRESSURE: 100 BAR
- OUTPUT VOLTAGE: 0-5 V DC
- INPUT VOLTAGE: 5-12 V
PRICE: Rs.9000 - 15000/-
CAN BE MANUFACTURED AS PER YOUR AMPERAGE / VOLTAGE REQUIREMENTS
According to BAJA SAE India Rulebook The accumulator isolation relays must open both poles of the accumulator. If these relays are open, no HV system must be inactive state. C3.4.2 The isolation relays must be of a “normally open” type. C3.4.3 The fuse protecting the accumulator tractive system circuit must have a rating lower than the maximum switch-off current of the isolation relays. C3.4.4 The accumulator isolation relays must not contain mercury.
- CONTACT- NORMALLY OPEN POSITION
- NO. OF CONTACTS- 2
- AVAILABLE IN THE RANGE OF 80- 200 AMP, 100-300 AMP, 200-400 AMP
- AVAILABLE RELAY COIL VOLTAGE 12V, 24V, 36V, 48V
PRICE: Rs.9200/-
Also known as Impact sensor, Fuel cut sensor, and Crash sensor. Used in FSAE Supra as part of the shutdown circuit. Results in shutdown circuit opening in case of a crash. 8-14g, 10-16g variants available.
This is an impact sensor/ resettable crash sensor. It is used to detect vehicle crashes and disconnect the circuit. It can be installed in the shutdown circuit of the vehicle reducing the risk of fire and electrical shock. In case of any impact, the switch gets actuated. It can be brought to a normal position by pressing the top cap. It has three terminals No, NC, and Common.
DETAILS - Material: Plastic, Category - Electricals, Weight - 45gms
THINGS INCLUDED - Main Body x 1, Rubber Cap x 1
FUNCTION: - SWITCH GETS ACTUATED IN CASE OF A VEHICLE CRASH AND DISCONNECTS THE CIRCUIT - DIRECTLY SHUTS DOWN THE FUEL PUMP ON 360-DEGREE DETECTION OF VEHICLE IMPACT AND REDUCES THE RISK OF FIRE AND ELECTRICAL SHOCK IN POST-CRASH SITUATIONS - CAN BE BROUGHT BACK TO THE NORMAL POSITION BY PRESSING THE TOP CAP - HAS THREE TERMINALS NO, NC, AND COMMON
FEATURES: - UNIQUE MAGNET-RESTRAINED MASS INERTIA MECHANISM - 10 AMPS ELECTRICAL LOAD RATING - Manually resettable - Stops fuel pump or electrical system operation - Secondary circuit provides additional function
BENEFITS - Reduces the risk of fire following a crash - Responsive for 360° impact - Ability to trigger GPS distress signal - Capable of carrying fuel pump or contactor coil load - Sensory feedback - Customized for various installations
FSAE - It is a part of the shutdown circuit. This switch results in a shutdown circuit opening in case of impact.
Other Names: Resettable crash sensor, Impact sensor, Fuel cut sensor, Crash sensor
Also known as Impact sensor, Fuel cut sensor, and Crash sensor. Used in FSAE Supra as part of the shutdown circuit. Results in shutdown circuit opening in case of a crash. 8-14g, 10-16g variants available.
This is an impact sensor/ resettable crash sensor. It is used to detect vehicle crashes and disconnect the circuit. It can be installed in the shutdown circuit of the vehicle reducing the risk of fire and electrical shock. In case of any impact, the switch gets actuated. It can be brought to a normal position by pressing the top cap. It has three terminals No, NC, and Common.
DETAILS - Material: Plastic, Category - Electricals, Weight - 45gms
THINGS INCLUDED - Main Body x 1, Rubber Cap x 1
FUNCTION: - SWITCH GETS ACTUATED IN CASE OF A VEHICLE CRASH AND DISCONNECTS THE CIRCUIT - DIRECTLY SHUTS DOWN THE FUEL PUMP ON 360-DEGREE DETECTION OF VEHICLE IMPACT AND REDUCES THE RISK OF FIRE AND ELECTRICAL SHOCK IN POST-CRASH SITUATIONS - CAN BE BROUGHT BACK TO THE NORMAL POSITION BY PRESSING THE TOP CAP - HAS THREE TERMINALS NO, NC, AND COMMON
FEATURES: - UNIQUE MAGNET-RESTRAINED MASS INERTIA MECHANISM - 10 AMPS ELECTRICAL LOAD RATING - Manually resettable - Stops fuel pump or electrical system operation - Secondary circuit provides additional function
BENEFITS - Reduces the risk of fire following a crash - Responsive for 360° impact - Ability to trigger GPS distress signal - Capable of carrying fuel pump or contactor coil load - Sensory feedback - Customized for various installations
FSAE - It is a part of the shutdown circuit. This switch results in a shutdown circuit opening in case of impact.
Other Names: Resettable crash sensor, Impact sensor, Fuel cut sensor, Crash sensor
- AUTOMETER WITH SHIFT LIGHT
- 5" DIAMETER
- SPORTS COMP SERIES
- BLACK / WHITE BACKGROUND
BRAND: NGK
BRAND: SPITFIRE
According to BAJA SAE India Rulebook B.2.7.6 - Spark Plugs The only permitted spark plug is RC12YC. No other spark plugs are permitted.
- CHAMPION COPPER PLUS SPARK PLUG PART NO. RC12YC
- COMPATIBLE WITH BRIGGS AND STRATTON ENGINES
- Cable length : 1.5M
- Rated voltage:08~4.2V
- Universal for 24V36V 48V 60V
- 2.4” LCD SCREEN
- 36+ WORKING HOURS
- USB, BLUETOOTH TRANSFER
- SUPPORTS ALL ANT+ & BLUETOOTH DEVICES
- IP67 WATERPROOF
PRICE: Rs.7000/-
- SPECIFICATIONS: SCREEN 2.5 CM
- FULL HD, RECORDS @1 20 DEGREES
- 1/4 HIGH RESOLUTION, HD 1280 * 720
- @ 30 FPS FORMAT AVI (MJPEG DECODING FORMAT)
- SUPPORTS MOTION DETECTION
- 5 MEGAPIXEL HIGH RESOLUTION
- 32GB MEMORY
- NOISE LEVEL: 80 DBA
- CONTINUOUS SOUND FOR 2 - 3 SEC
- MINIMUM SOUND RANGE: 10 MTS
- MyLaps TR2 Transponder
- 1Year subscription
- Rechargeable
- Mount and race Key included
A) 20 LTS PRICE: Rs.4500/-
B) 10 LTS PRICE: Rs.4000/-
C) 5 LTS PRICE: Rs.2300/-
COLOUR OPTIONS AVAILABLE: RED/ BLACK/GREEN