1. Paper #3. Silicone oil grease, Jeoung Yeon Yoo, Sanghyun Park,... Hong Suk Kang (In-preparation), 2026

2. Paper #2. PFAS electrochemical sensor, Gyu Hyoung Bae,...Sang-Goo Lee, Hong Suk Kang (In-preparation), 2026

3. Paper #1. PFAS adsorbent, Yunkyu Kwak... Hong Suk Kang (In-preparation), 2026 

4. Ui-Won Lee, Yunkyu Kwak, Nahyun Kang, Yeoun Kang, Sang-Goo Lee*, Ji-Hoon Baik*, and Hong Suk Kang*, "Nitrogen Doping Sequence Resolves the Porosity-Nitrogen Trade-off for Enhanced PFAS Removal ", 2026

5. Jisu Jang+, Woojin Kang+, Yeongseok Seo, Gyu Hyoung Bae, Jeong Yeon Yoo, Sang-Goo Lee*, Keun-Hwan Oh*, and Hong Suk Kang* Bio-Based Transparent Self-Healable Polyimides Enabled by Isosorbide-Derived Dianhydride Design and Aliphatic Chain-Mobility Regulation", Small (IF: 11.8, JCR 8%), 2026, Accepted

6.  Eun-Sun Oh, Inku Kang, Won-Jong Choi, Eunseo Kang, Soonyong So, Duk Man Yu, Sang Jun Yoon, Kwan Woo Nam*, Hong Suk Kang*, and Keun-Hwan Oh* "Coordination-Stabilized Radical Scavengers to Enhance Chemical Durability of Ionomers and Catalysts for Polymer Electrolyte Membrane Fuel Cells", Carbon Energy (Revision), 2026

7.  ....Hong Suk Kang* and Duk Man Yu*, "Hydrocarbon ionomer catalyst layer engineering for high-performance all-hydrocarbon-based proton exchange membrane water electrolysis", Chemical Engineering Journal (Revision), 2026

8.  Deok Hoon Kim, Yunkyu Kwak, Sang-Goo Lee,* Ju Hyeon Kim,* Hong Suk Kang* "PVDF-Pyrolyzed Fluorine-Doped TiO₂ for Synergistic Adsorption-Enhanced PFOA Photocatalysis", EcoMat (IF: 12.6, JCR 6%), 2026, 8, e70053 (Link)

9.  Hyunmin Cho, Hong Suk Kang, Junyeob Yeo*, Jinhyeong Kwon*, Laser-Patterned Tungsten Trioxide (WO3) Electrochromic Devices for Smart Windows with Optical and Thermal Control, Applied Surface Science (IF: 6.9, JCR 10%), 2026, 722, 165571 (Link)

10. Ye Rim Kim, Hong Suk Kang , Dong Kyu Kim, Young Taik Hong, Keun-Hwan Oh, Duk Man Yu*, Soonyong So*, Sang Jun Yoon*, Development of Hydrocarbon-Based Composite Membranes with Enhanced Ion Selectivity for Vanadium Redox Flow Batteries, Composites Part B: Engineering (IF: 14.2, JCR 0.2%), 2026, 309, 113082 (Link) 

11. Won-Jong Choi, Jinhyuk Lim, Inku Kang, Eun-Sun Oh, Soonyong So, Hong Suk Kang*, and Keun-Hwan Oh* "Cellulose Nanofibers Derived from Sea Squirt Tunics for Enhancing PEM Fuel Cells Performance via Pt/C–ionomer Agglomerate Engineering", Small (IF: 12.1, JCR 7%), 2026, 0, e12653 (Link)

12.  Won-Jong Choi, Jinhyuk Lim, inku Kang, Soonyong So, Duk Man Yu, Sang Jun Yoon, Sungjun Kim, Yong Min Jang, Hong Suk Kang*, Keun-Hwan Oh,*"Enhanced Performance and Durability of Sealing Gasket for Polymer Electrolyte Membrane Fuel Cells and Water Electrolyzer by C-C coupling of Functionlized 2D Boron Nitride Nanoflakes ", Advanced Composites and Hybrid Materials (IF: 21.8, JCR 1.5%), 2025, 8, 382 (Link)

13. Hyebhin Yoon, Ju Hyeon Kim, Jongmin Kim, Jin Woo Bae,* Eun-Ho Sohn,* Hong Suk Kang* "Stretchable Polymeric-Gel-Based Sponge with Tunable Wettability via Segmented Network Design", Materials Horizons (IF: 10.7, JCR 11%), 2025, 12, 5666 (Link)

-Selected as ‘Inside Front Cover’
-Selected as 'soft wearable sensor' collection (Link)

14.  So-Young Nam, Hong Suk Kang, Hyun-Seung Kim, Sang-Gil Woo,*  Je-Nam Lee* "Design of PVDF–g–PAA Binder Endowing High Sulfur Loading With Enhanced Performance of Lithium–Sulfur Batteries", International Journal of Energy Research (IF: 4.2, JCR 1.2%), 2025, 1, 3375897

15.  Ui-Won Lee,  Sang Goo Lee, Jisu Jang, Keun-Hwan Oh,* Younghyun Cho,*  Hong Suk Kang*  "Surface Fluorination of PAN-based Carbon Fibers Electrodes for High Energy Density Supercapacitor ", ACS Applied Energy Materials (IF: 5.6, JCR 28%), 2025, 8, 3606

16. Gyounglyul Jo, Jinhyeong Kwon, Hong Suk Kang*  "Engineering Electrospun PAN/PCL Blend for High-Performance and Eco-Friendly Particulate Matter Filtration ", Reactive and Functional Polymers (IF: 5.1, JCR 17%), 2024, 204, 106026

17.  Inku Kang , Won-Jong Choi , Hwan Yeop Jeong , Chang Jin Lee , Soonyong So , Duk Man Yu , Sang Jun Yoon , Hong Suk Kang , Dong-Won Kim,* Keun-Hwan Oh*, " Effect of cathode ink formulation on the hydrogen crossover and cell performance of proton exchange membrane water electrolyzers", Journal of Power Sources (IF: 7.9, JCR 14%), 2024, 614, 234978

18.  Ui-Won Lee, Ji-Hoon Baik*, Sang-Goo Lee*, Hong Suk Kang*, "Transforming polymeric air filters into high-performance supercapacitor electrodes through carbonization and fluorination", Surfaces and Interfaces (IF: 6.3, JCR 14%), 2024, 46, 104061

19.  Siyeon Lee, Heejin Koo, Hong Suk Kang,* Keun-Hwan Oh,* Kwan Woo Nam* "Advances in Polymer Binder Materials for Lithium-Ion Battery Electrodes and Separators", Polymers (IF: 4.9, JCR 19%), 2023, 15, 4477

20.  Tran Minh Khoi, Nguyen Anh Thu Tran, Hye Bin Jung, Youna Kim, Jinkee Hong, Chung-Yul Yoo,* Hong Suk Kang,* Younghuyn Cho* “Selective and continuous ion recovery using flow electrode capacitive deionization with polymer multilayers functionalized ion exchange membrane”, Desalination (IF: 9.8, JCR 2%), 2023, 558, 116626

---------------------------------------------- Before Inha University ----------------------------------------------

21.   Soo Min Lim, Jaeil Ryu, Eun-Ho Sohn, Sang-Gu Lee, In Jun Park, Jinkee Hong*, Hong Suk Kang*, “Flexible, Elastic, and Superhydrophobic/Superoleophilic Adhesive for Reusable and Durable Water/Oil Separation Coating”, ACS Applied Materials & Interfaces, 2022, 14, 10825
    *Corresponding Author 

22. Hong Suk Kang,* Shu Yang*, “Photopatterning via photofluidization of azobenzene polymers”, Light: Advanced Manufacturing, 2022, 3, 1
    - Invited Review
    *Both 1st and Corresponding Author 

23. Jae Hyuk Hwang, Dong Soo Lee, Jung Ho Joe, Yong-Seok Choi, Sungmin Park, Woohwa Lee, Yong Seok Kim, Hong Suk Kang,* Dong-Gyun Kim,* and Jong-Chan Lee*, “Monolithically Assembled 3D Soft Transforming Robot”, Advanced Intelligent Systems, 2022, 2200051
    *Corresponding Author 

24. Eunsoeng Yi,† Hong Suk Kang,† Hyeon Jun Heo, Soo Min Lim, Jeong F. Kim, Ahrumi Park, You-In Park, Young Hoon Cho, Eun-Ho Sohn, “Omniphobic blood-repellent surface modification of porous membranes for blood oxygenation applications”, Journal of Membrane Science, 2022, 648, 120363
    †Equally 1st Author 

25. Ngo Minh Phuoc, Nguyen Anh Thu Tran, Tran Minh Khoi, Hye Bin Jung, Namchul Cho, Young-Woo Lee, Euiyeon Jung, Beom-Goo Kang, Kyungtae Park, Jinkee Hong, Chung-Yul Yoo, Hong Suk Kang*, and Younghyun Cho* “Electroactive Self-Polymerized Dopamine with Improved Desalination Performance for Flow- and Fixed- Electrodes Capacitive Deionization”, Applied Surface Science, 2022, 579, 152154
    *Corresponding Author 

26. Hyeon-Su Bae, Isheunesu Phiri, Hong Suk Kang, Yong Min Lee, Young-Gi Lee, Myung-Hyun Ryou, “Large-area surface-patterned Li metal anodes fabricated using large, flexible patterning stamps for Li metal secondary batteries”, Journal of Power Sources, 2021, 514, 230553 

27. Ngo Minh Phuoc, Nguyen Anh Thu Tran, Tran Minh Khoi, Hye Bin Jung, Wook Ahn, Euiyeon Jung, Chung-Yul Yoo,* Hong Suk Kang,* and Younghyun Cho*, “ZIF-67 Metal-Organic Frameworks and CNTs-Derived Nanoporous Carbon Structures as Novel Electrodes for Flow-Electrode Capacitive Deionization”, Separation and Purification Technology, 2021, 277, 119466 
    *Corresponding Author

28. Dong Je Han, Seonwoo Kim, Hyeon Jun Heo, Chaewon Jin, Jin-young Kim, Hongsoo Choi, In Jun Park, Hong Suk Kang, Sang Goo Lee, Jong-Chan Lee, Eun-Ho Sohn, “Poly (vinylidene fluoride)-Based Film with Strong Antimicrobial Activity”, Applied Surface Science, 2021, 562, 150181

29.  Wonhee Jo, Hong Suk Kang, Jaeho Choi, Jinkwan Jung, Jonghyun Hyun, Jaehyung Kwon, Ilju Kim, Hongkyung Lee, Hee-Tak Kim, “Light-Designed Shark Skin-Mimetic Surfaces”, Nano Letters, 2021, 21, 5500

30. Seung-Hyun Kim, Hong Suk Kang, Eun-Ho Sohn, Bong-Jun Chang, In Jun Park, Sang Goo Lee, “A strategy for preparing controllable, superhydrophobic, strongly sticky surfaces using SiO2@PVDF raspberry core–shell particles”, RSC Advances, 2021, 11, 23631 

31. Hong Suk Kang, Jason Christopher Jolly, Hyesung Cho, Abhishek Kalpattu, Xu A. Zhang, and Shu Yang*, “Three-Dimensional Photoengraving of Monolithic, Multifaceted Metasurfaces”, Advanced Materials, 2021, 33, 2005454 (IF: 27.398)
    - Selected as a Front Cover of Advanced Materials
    - Highlighted in Adv. Sci. News (https://twitter.com/AdvSciNews/status/1346714432127295489)

32. Yuncheol Ha, Hyejeong Lee, Hana Yoon, Dongwon Shin, Wook Ahn, Namchul Cho, Uiyoung Han, Jinkee Hong, Nguyen Anh Thu Tran, Chung-Yul Yoo, Hong Suk Kang⁎, and Younghyun Cho⁎, “Enhanced Salt Removal Performance of Flow Electrode Capacitive Deionization with High Cell Operational Potential”, Separation and Purification Technology. 2021, 254, 117500
    *Corresponding Author

33. Nguyen Anh Thu Tran, Ngo Minh Phuoc, Hana Yoon, Euiyeon Jung, Young-Woo Lee, Beom-Goo Kang, Hong Suk Kang*, Chung-Yul Yoo*, and Younghyun Cho*, “Improved Desalination Performance of Flow- and Fixed-Capacitive Deionization using Redox-Active Quinone”, ACS Sustainable Chemistry & Engineering. 2020, 8, 16701
    *Corresponding Author

34.  Soo Min Lim, Myoung Sook Lee, Eun-Ho Sohn, Sang-Gu Lee, In Jun Park, and Hong Suk Kang*, "Perfluoropolyether-Benzophenone as a Highly Durable, Broadband Anti-Reflection, and Anti-Contamination Coating", Scientific Reports. 2020, 10, 1
    *Corresponding Author

35.  Jaeho Choi, Hong Suk Kang, Wonhee Jo, Hee-Tak Kim, “Light-induced surface patterning of alumina”, RSC Advance, 2020, 10, 20197

36. Wonhee Jo, Jaeho Choi, Hong Suk Kang, Sang Yul Baik, Hee-Tak Kim "Programmable fabrication of sub-micron bent pillar structures by adopting photo-responsive azopolymer", ACS Applied Materials & Interfaces, 2020, 12, 5058

37. Dong Je Han, Hyeon Jun Heo, In Jun Park, Hong Suk Kang, Sang Goo Lee, Soo-Bok Lee, Jong-Chan Lee, Eun-Ho Sohn "Fluorinated Methacrylate-Grafted P (VDF-CTFE) and Albumin Layers for Reducing Fibrinogen Adsorption", ACS Applied Polymer Materials, 2020, 2, 178

38. Dong Je Han, Seonwoo Kim, Hyeon Jun Heo, In Jun Park, Hong Suk Kang, Sang Goo Lee, Jong-Chan Lee, Eun-Ho Shon " Access to Fluorinated Polymer Surfaces with Outstanding Mechanical Property, High Optical Transparency, and Low Surface Energy via Nonafluoro-tert-Butyl Group Introduction", ACS Applied Polymer Materials, 2020, 2, 3957

39. Soonyong So, Hong Suk Kang, Dahye Choi, Keun-Hwan Oh " Tunable Aggregation of Short-side-chain Perfluorinated Sulfonic Acid Ionomers for the Catalyst Layer in Polymer Electrolyte Membrane Fuel Cells", International Journal of Hydrogen Energy, 2020, 45, 19891

40.  Chang-Yeol Cho, Seung-Hyun Kim, Jong-Wook Ha, Hong Suk Kang, Eun-Ho Sohn, In Jun Park, Gi-Ra Yi, Sang Goo Lee "High dielectric constant and low percolation threshold in poly (vinylidene fluoride) composite films containing mechanochemically synthesized BaSnF4 nanowires", ACS Applied Electronic Materials, 2019, 1, 2355

41. Seung-Hyun Kim, So-Jeong Park, Chang-Yeol Cho, Hong Suk Kang, Eun-Ho Sohn, In Jun Park, Jong-Wook Ha, Sang Goo Lee "Preparation and electroactive phase adjustment of Ag-doped poly (vinylidene fluoride)(PVDF) films", RSC Advances, 2019, 9, 40286

42. Seung-Hyun Kim, Jong-Wook Ha, Sang-Goo Lee, Eun-Ho Sohn, In Jun Park, Hong Suk Kang,* Gi-Ra Yi* "F-TiO2 nanoparticle-induced piezoelectric phase transition of PVDF", Langmuir, 2019, 35, 8816
    *Corresponding Author

43. Hong Suk Kang, Kwan-Woo Nam, Soonyong So, Keun-Hwan Oh "Effect of hydrophilic 2-D layered minerals in cathode catalyst layers on performance of polymer electrolyte membrane fuel cells", Journal of Industrial and Engineering Chemistry, 2019, 78, 455

44. Eun–Ho Sohn,+ Hong Suk Kang,+,* Jeong-Cheol Bom, Jong-Wook Ha, Soo-Bok Lee, In Jun Park "Silica-core perfluorinated polymer-shell composite nanoparticles for highly stable and efficient superhydrophobic surfaces", (+equal contribution) Journal of Materials Chemistry A, 2018, 6, 12950.
    *Both 1st and Corresponding Author

45. Jaeho Choi, Hong Suk Kang, Wonhee Jo, Shin‐Hyun Kim, Yeon Sik Jung, Hee‐Tak Kim "Photo‐reconfigurable azopolymer etch mask: photofluidization‐driven reconfiguration and edge rectangularization", Small, 2018, 14, 1703250

46. Hong Suk Kang, Hyesung Cho, Weerapha Panatdasirisuk, Shu Yang "Hierarchical membranes with size-controlled nanopores from photofluidization of electrospun azobenzene polymer fibers", Journal of Materials Chemistry A, 2017, 5, 18762

47. Seunggu Yu, Hyesung Cho, Jun Pyo Hong, Hyunchul Park, Jason Jolly, Hong Suk Kang, Junsoo Kim, Seung Hwan Lee, Albert Lee, Soon Man Hong, Cheolmin Park, Shu Yang, Chong Min Koo "Shaping micro-clusters via topographically close-packed jamming of microbombs", Nature Communications, 2017, 8, 721

48. Wonhee Cho,+ Hong Suk Kang,+ Jaeho Choi, Hongkyung Lee, Hee-Tak Kim "Plasticized polymer interlayer for low temperature fabrication of a high-quality silver nanowire-based flexible transparent and conductive film", (+equal contribution) ACS Applied Materials & Interfaces, 2017, 9, 15114

49. Jaeho Choi, Wonhee Cho, Yeon Sik Jung, Hong Suk Kang,* Hee-Tak Kim* "Direct fabrication of micro/nano-patterned surfaces by vertical-directional photofluidization of azobenzene materials", ACS Nano, 2017, 11, 1320
    *Corresponding Author

50. Brian M. Jun, Francesca Serra, Yu, Xia, Hong Suk Kang, Shu Yang "Fabrication of free-standing, high-aspect ratio artificial ommatidia", ACS Applied Materials & Interfaces, 2016, 8, 30671

51. Hong Suk Kang, Jaeho Choi, Wonhee Cho, Hongkyung Lee, Dongyoung Lee, Dai Gil Lee, Hee-Tak Kim “Silver nanowire networks embedded in cure-controlled optical adhesive film for transparent and highly conductive electrode", Journal of Materials Chemistry C, 2016, 4, 9834

52. Chang Kyu Son,+ Hong Suk Kang,+ Jin Woo Kim, Hongkyung Lee, Seong Ho Ahn, Jung-Ki Park, Hee-Tak Kim "Homogeneously dispersed silver nanoparticles in laminating film for efficiency enhancement of silicon photovoltaic cells" (+equal contribution) Macromolecular Research, 2016, 24, 436

53.  Hong Suk Kang, Seungwoo Lee, Jaeho Choi, Hongkyung Lee, Jung-Ki Park, Hee-Tak Kim "Light-induced surface patterning of silica", ACS Nano, 2015, 9, 9837

54. Seungwoo Lee,+ Hong Suk Kang,+ Antonio Ambrosio,+ Jung-Ki Park, Lorenzo Marrucci "Directional superficial photofluidization for deterministic shaping of complex 3D architectures" (+equal contribution), ACS Applied Materials & Interfaces, 2015, 7, 8209

55. Keun-Hwan Oh,+ Hong Suk Kang,+ Min-Ju Choo, Duk-Hun Jang, Dongyoung Lee, Dai Gil Lee, Jung-Ki Park, Hee-Tak Kim "Interlocking memebrane/catalyst layer interface for high mechanical robustness of hydrocarbon membrane based polymer electrolyte membrane fuel cell" (+equal contribution), Advanced Materials, 2015, 27, 2974
    -Selected as ‘Back cover’ in Advanced Materials

56. Sol-Ah Lee, Hong Suk Kang, Jung-Ki Park, Seungwoo Lee "Vertically oriented, three-dimensionally tapered deep-subwavelength metallic nanohole arrays developed by photofluidization lithography", Advanced Materials, 2014, 25, 7521

57. Hong Suk Kang, Hee-Tak Kim, Jung-Ki Park, Seungwoo Lee, “Light-powered healing of a wearable electrical conductor”, Advanced Functional Materials, 2014, 24, 7273
    -Highlighted in 'nanowerk'-Selected as 'Frontispiece'-Most read article, Sep. & Dec.2014

58. Hong Suk Kang, Seungwoo Lee, Sol-Ah Lee, Jung-Ki Park "Multi-level micro/nanotexturing by three-dimensionally controlled photofluidization and its use in plasmonic applications", Advanced Materials, 2013, 25, 5490

59. Seungwoo Lee, Hong Suk Kang, Jung-Ki Park "Directional photofluidization lithography: micro/nanostructural evolution by photofluidic motions of azobenzene materials", Advanced Materials, 2012, 24, 2069
    - Invited review
    - Selected as 'Inside front cover' in Advanced Materials

60. Seungwoo Lee, Hong Suk Kang, Jung-Ki Park "High resolution patterning of various large-area, highly ordered structural motifs by directional photofluidization lithography: Sub 30 nm line, ellipsoid, rectangle, and circle arrays," Advanced Functional Materials, 2011, 21, 1770
    - Selected as 'Frontispiece' in Advanced Functional Materials

61. Seungwoo Lee, Jonghwa Shin, Hong Suk Kang, Yong-Hee Lee, Jung-Ki Park "Deterministic nanotexturing by directional photofluidization lithography," Advanced Materials, 2011, 23, 3244
    - Selected as 'Frontispiece' in Advanced Materials

62. Hong Suk Kang,+ Seungwoo Lee,+ Jung-Ki Park "Monolithic, hierarchical surface reliefs by holographic photofluidization of azopolymer arrays: Direct visualization of polymeric flows" (+equal contribution), Advanced Functional Materials, 2011, 21, 4412
    - Selected as 'Frontispiece' in Advanced Functional Materials

1.  "투명 자가치유 폴리이미드 기반 고분자 재료 및 이의 제조방법", KR (출원번호: 10-2026-0111275, 2026.06.18) - 인하대학교 출원

2. "전기화학 불소화 반응기 및 이를 이용하여 과불화 화합물을 제조하는 방법", KR (출원번호: 10-2026-0043571, 2026-03.11) - 인하대학교, 현대차 공동 출원

3.  "아민계 화합물의 제조방법", KR (출원번호: 10-2025-0125679, 2025-09.04) - 인하대학교, 현대차 공동 출원

4. "사불화에틸렌 수지의 상압 열분해 반응 장치 및 이를 이용 한 사불화에틸렌의 제조방법", KR (출원번호: 2022-0169207 / 2022-12-06)

5. "과불소 황산기 포함 음이온성 불소계 고분자의 제조방법 및 이로부터 제조된 고분자막", KR (출원번호: 2022-0144252 / 2022-11-02)

6. "불소계 고분자 및 이의 제조 방법", KR (출원번호: 2022-0143993  / 2022-11-01)

7. "불소계 고분자 및 이의 제조 방법", KR (출원번호: 2022-0133371 / 2022-10-17)

8. "균일한 입자 크기를 갖는 폴리비닐리덴 플루오라이드계 고분자 입자의 제조방법 ", KR (출원번호: 2022-0078571 / 2022-06-28)

9. "전기화학적 불소화법을 이용한 PFTPA의 제조 장치 및 방법", KR (출원번호: 10-2022-0075812 / 2022-06-21)

10. "고순도 PFTPA의 제조 장치 및 방법", KR (출원번호: 10-2022-0075836 / 2022-06-21)

11. "불소계 공중합체에 양이온성 단량체와 불소계 아크릴 단량체가 그라프트 중합된 고분자 화합물을 포함하는 항균성 고분자 조성물", KR (출원번호: 2022-0053257 / 2022-04-29)

12. "초소수성 유수분리 구조체 및 이의 제조방법', KR (출원번호: 10-2022-0002593 / 2022-01-07)

13. "불소계 고분자 코팅막, 이를 포함한 광학용 기재 및 그 광학용 기재의 제조방법", PCT (출원번호: PCT/KR2021/019999 / 2021-12-28)

14. "과불소 황산기를 함유하는 불소계 공중합체 제조방법 및 이로부터 제조된 공중합체", KR (출원번호: 10-2021-0172408 / 2021-12-03)

15. "용융 가공성 PTFE계 중합체의 친환경 제조 방법", KR (출원번호: 2021-0163901 / 2021-11-25)

16. "고순도의 비닐리덴 플루오라이드 제조를 위한 장치 및 방법", KR (출원번호: 2021-0164128 / 2021-11-25)

17. "비닐리덴 플루오라이드 제조장치 및 제조방법", KR (출원번호: 2021-0164095 / 2021-11-25)

18. "폴리테트라플루오르에틸렌의 상압 열분해 반응 장치 및 이를 이용한 테트라플루오르에틸렌의 제조방법", KR (출원번호: 2021-0163953 / 2021-11-25)

19. "가교된 불소계 공중합체 및 이의 제조방법",  KR (출원번호: 2021-0163883 / 2021-11-25)

20. "레독스 흐름전지용 이온교환막 및 이의 제조방법, 및 이를 포함하는 레독스 흐름전지", KR (출원번호: 2021-0159990 / 2021-11-19)

21. "레독스 흐름전지용 이온교환 강화복합막, 이의 제조방법, 및 이를 포함하는 레독스 흐름전지", KR (출원번호: 2021-0159985 / 2021-11-19)

22. "SF6 가스를 대체하여 전기 절연 또는 아크 소호에 사용되는 절연 가스와 이를 이용한 전기 장치  ",
    - KR (출원번호: 2021-0142595 / 2021-10-25)
    - PCT (출원번호: PCT/KR2021/015042 /2021-10-25)

23. "내화학성과 내오염성이 우수한 불소계 고분자 코팅 조성물 ",
    - KR (출원번호: 2021-0140068 / 2021-10-20)
    - PCT (출원번호: PCT/KR2021/014761 / 2021-10-20)

24. “라즈베리형 코어쉘 구조 복합체 및 그의 제조 방법”, KR (출원번호: 2021-0110492 / 2021-08-20)

25. “퍼플루오로디알킬에테르의 제조 방법 및 퍼플루오로디알킬에테르의 제조장치”,
    - KR (등록번호: 2476557 / 2022-12-07)
    - PCT (출원번호: PCT/KR2021/009664 / 2021-07-26)

26. “퍼플루오로디알킬에테르의 제조 방법 및 퍼플루오로디알킬에테르의 제조장치”,
    - KR (등록번호: 2476556 / 2022-12-07)

27. “폴리비닐리덴 플루오라이드 제조방법 및 이에 의하여 제조되는 폴리비닐리덴 플루오라이드”,
    - KR (출원번호: 2021-0096131 / 2021-07-22)
    - PCT (출원번호: PCT/KR2022/001689 /2022-02-03)

28. “저유전율 불소계 고분자 및 이를 포함하는 불소계 고분자 조성물”,
    -  KR (출원번호: 2021-0094087 / 2021-07-19)
    -  PCT (출원번호: PCT/KR2022/009579/ 2022-07-04)

29. “불소계 고분자, 이를 포함하는 불소계 고분자 조성물 및 이를 이용한 불소계 고분자막”,
    - KR (출원번호: 2021-0046339 / 2021-04-09)
    - PCT (출원번호: PCT/KR2022/001798 / 2022.02.07)

30. “크기가 조절된 불소 고분자 나노입자의 제조 및 그 분산액을 이용한 입자 코팅막”, KR (출원번호: 2020-0184218 / 2020-12-28)

31. “모노리식 다면적 메타표면의 3차원 포토인그레이빙 방법”, KR (등록번호: 2463666/ 2022-11-01)

32. “과불소폴리에테르-벤조페논(PFPE-BP) 폴리머 및 이를 포함하는 반사·오염 방지 코팅제”, KR (출원번호: 2020-0180937 / 2020-12-22)

33. “폴리비닐덴플루오라이드 제조방법”, KR (출원번호: 2020-0174281 / 2020-12-14)

34. “과불소 황산기 함유 불소계 공중합체 제조방법”, KR (출원번호: 2020-0167880 / 2020-12-03)

35. “내화학성과 내오염성이 우수한 불소계 고분자 코팅 조성물”, KR (출원번호: 2020-0137390 / 2020-10-22)

36. “불소계 공중합체에 양이온성 단량체가 그라프트 중합된 고분자 화합물을 포함하는 항균성 고분자 조성물”, KR (등록번호: 2400671/ 2022-05-18)

37. “불소계 고분자의 제조 방법, 불소계 고분자, 및 이를 포함하는 고분자막 ”, KR (등록번호: 2353641/ 2022-01-17)

38. “불소고분자 파티클 복합체 코팅액 조성물 및 이를 이용한 불소계 고분자 막”, PCT/KR (출원번호: PCT/KR 2020/011926 / 2020-09-04)

39. “코어-쉘 입자를 포함하는 복합체 및 이를 포함하는 복합필름의 제조방법”, KR (등록번호: 2472979/ 2022-11-28)

40. “2,3,3,3-테트라플루오로-2-트리플루오로메톡시 프로피오닐 플루오라이드로 부터 퍼플루오로메틸에틸에테르의 연속 제조를 위한 공정 및 장치”, KR (출원번호: 2020-0094087/ 2020-07-28)

41. “퍼플루오로메틸에틸에테르의 제조방법”, KR (출원번호: 2020-0094086/ 2020-07-28)

42. “퍼플루오로메틸비닐에테르의 제조방법”, KR (출원번호: 2020-0083359/ 2020-07-07)

43. “퍼플루오로프로필비닐에테르의 제조방법”, KR (등록번호: 2477300 / 2022-12-08)

44. “높은 전환율을 갖는 헥사플루오로프로필렌 옥사이드 이량체의 제조방법”,
    - KR (등록번호: 2425264 / 2022-07-21)
    - PCT (출원번호: PCT/KR2021/008503 /2021-07-05)

45. “고분자 중합 장치 및 고분자 중합 공정”, KR (등록번호: 2311013/ 2021-10-01)

46. “분자량 조절 고분자 중합 공정”,
    - KR (등록번호: 2311012/ 2021-10-01)
    - US (등록번호: 17/907,844/2022-08-29)

47. “고분자 중합 장치 및 고분자 중합 공정”, KR (등록번호: 2274533/ 2021-07-01)

48. “산화 삼불화 아민의 제조방법”,
    - US (등록번호: 10934167 / 2021-03-02)
    - JP (등록번호: 6876864 / 2021-04-28)
    - TW (등록번호: I700245 / 2020-08-01)
    - CN (등록번호: 111479774 / 2021-04-13)
    - WO (출원번호: PCT/KR2019/006582 / 2019-05-31)
    - KR (등록번호: 2010460 / 2019-08-07)

49. “혈액 적합성 불소고분자 조성물과 그 제법”,
    - WO (출원번호: PCT/KR2019/017415 / 2019-12-10)
    - KR (등록번호: 2136871/ 2020-07-16)

50. “불소계 공중합체에 양이온성 단량체가 그라프트 중합된 고분자 화합물을 포함하는 항균성 고분자 조성물”, KR (출원번호: 2019-0136927 / 2019-10-30)

51. “불소계 고분자 복합막 및 이의 제조방법”,
    - KR (등록번호: 2224071 / 2021-03-02)
    - US (출원번호: 17/768,986 / 2022-04-14)

52. “혈액적합형 불소계 인공폐 분리막 및 이의 제조방법”, KR (등록번호: 2254803 / 2021-05-17)

53. “헵타플루오르아이소프로필 트리플루오르비닐 에테르의 제조방법”,
    - KR (등록번호: 2031804 / 2019-10-07)
    - WO (출원번호: PCT/KR2019/011008 / 2019-08-28)

54. “폴리비닐리덴 플루오라이드 복합체”, KR (등록번호: 2266526 / 2021-06-14)

55. “산화 삼불화아민 효과적 제조방법 및 장치”,
    - US (출원번호: 16/624,735 / 2019-05-31)
    - JP (등록번호: 6880305 / 2021-05-07)
    - TW (등록번호: I700244 / 2020-08-01)
    - CN (등록번호: ZL 201980003132.0 / 2021-03-19)
    - WO (출원번호: PCT/KR2019/006580 / 2019-05-31)
    - KR (등록번호: 2010466 / 2019-08-07)

56. “과산화 퍼플루오로폴리에테르의 과산화물 제거를 통한 퍼플루오로폴리에테르의 제조장치 및 제조방법”, KR (등록번호: 2240973 / 2021-04-12)

57. “헵타플루오로이소프로필옥시 테트라플루오로 프로파노일 플루오라이드의 제조방법”, KR (등록번호: 2026794 / 2019-09-24)

58. “광유체화를 이용하여 마이크로 패턴 상에 나노구조체를 제조하는 방법, 이에 의하여 제조된 나노구조체 및 그 응용”, KR (등록번호: 1447085 / 2014-09-26)

59. “빛을 이용하여 단락된 전기전도도를 자기회복 하는 필름, 그 제조방법 및 응용”, KR (등록번호: 1606080 / 2016-03-18)

1. "반도체 산업용 불소계 아크릴 공중합체 소재 기술", (주)정석케미칼, 기술이전일: 2025-09-21

2. “TFE 제조 및 정제 방법”, (주)상아프론테크, 기술이전일: 2023-01-19

3. "SF6 가스를 대체하여 전기 절연 또는 아크 소호에 사용되는 절연 가스 적용 기술", 일진전기(주)

4.  "PFTPA 제조 장치 및 방법", (주)SK스페셜티 (구, SK 머티리얼즈), 기술이전일: 2022-11-28, 기술료 총액: 선급 3억원 (경상기술료 매출 1.0%, 20억)
   - 기술이전 책임자: Hong Suk Kang

5. “PFSA(Perfluorosulfonic acid) ionomer 합성”, (주)캠트로스, 기술이전일: 2021-03-16, 기술료 총액: 2억원

6. “PVDF 제조공정 기술”, (주)캠트로스, 기술이전일: 2019-03-12, 기술료 총액: 2억원