Embedded Files
Products needed to winterize pool in st george area
Products needed to winterize pool in st george area
How to Winterize Your Swimming Pool in St. George, Utah
Overview
Winterizing your swimming pool is important to protect it from damage during the winter months. In St. George, Utah, the winters tend to be mild, but temperatures can still drop below freezing at night. This can cause water in the pool's plumbing system to freeze and expand, which can lead to cracks and leaks
By following these steps, you can properly winterize your swimming pool and ensure that it is ready to open again in the spring
Close your swimming pool for winter
Clean your pool. This includes brushing the walls and floor, vacuuming the bottom, and skimming the surface. Remove any debris from the pool and skimmer baskets. Balance your pool's water chemistry
2. Balance your pool's water chemistry. This is important to prevent algae growth and other problems during the winter. Test your pool's pH, alkalinity, and chlorine levels and adjust them as needed. Balance your pool's water chemistry
3. Shock your pool. This will kill any remaining bacteria and algae in the water. Balance your pool's water chemistry
4. Add a winterizing float. This is important to prevent water from freezing and expanding in the pool's plumbing system. Lower the water level to about 6 inches below the skimmer opening. Add a winterizing float
5. Add a winterizing float. This will help to keep the water from freezing and damaging the pool's liner. Use a high-quality pool cover that is specifically designed for winter use. Add a winterizing float
Close your swimming pool for winter
1. Disconnect the pool pump and filter. Drain all of the water from the heater and its plumbing lines. Drain all of the water from the pump and filter housing. Plug the pool's return lines
2. Blow out the pool's plumbing lines. This will remove any remaining water from the pipes and prevent them from freezing. You can use an air compressor to do this. Plug the pool's return lines
3. Plug the pool's return lines. This will prevent water from backflowing into the pool. Plug the pool's return lines
4. Cover your pool. This will protect it from debris and the elements. Use a high-quality pool cover that is specifically designed for winter use. Cover your pool
Winterize your swimming pool
1. Add an algaecide to the pool. This will help to prevent algae growth during the winter. Add an algaecide to the pool
2. Add a winterizing chlorine floater to the pool. This will help to maintain a low chlorine level throughout the winter. Add an algaecide to the pool
3. Check your pool's water chemistry periodically throughout the winter. If necessary, adjust the pH, alkalinity, and chlorine levels. Add an algaecide to the pool
Springtime
When you are ready to open your pool in the spring, simply remove the pool cover, disconnect the winterizing chlorine floater, and reconnect the pool heater and filter. Then, shock the pool and balance the water chemistry. Once the water is clear and balanced, your pool is ready to use again!
Page updated
Google Sites
Report abuse