By following these steps, you can properly winterize your swimming pool and ensure that it is ready to open again in the spring

Winterize your swimming pool

1.      Clean your pool. This includes brushing the walls and floor, vacuuming the bottom, and skimming the surface. Remove any debris from the pool and skimmer baskets. Balance your pool's water chemistry

2. 2.      Balance your pool's water chemistry. This is important to prevent algae growth and other problems during the winter. Test your pool's pH, alkalinity, and chlorine levels and adjust them as needed. Balance your pool's water chemistry

3. 3.      Shock your pool. This will kill any remaining bacteria and algae in the water. Balance your pool's water chemistry

4. 4.      Add a winterizing float. This is important to prevent water from freezing and expanding in the pool's plumbing system. Lower the water level to about 6 inches below the skimmer opening. Add a winterizing float

5. 5.      Add a winterizing float. This will help to keep the water from freezing and damaging the pool's liner. Use a high-quality pool cover that is specifically designed for winter use. Add a winterizing float

6. Close your swimming pool for winter

7. 1.      Disconnect the pool pump and filter. Drain all of the water from the heater and its plumbing lines. Drain all of the water from the pump and filter housing. Disconnect the pool heater

8. 2.      Blow out the pool's plumbing lines. This will remove any remaining water from the pipes and prevent them from freezing. You can use an air compressor to do this. Disconnect the pool heater

9. 3.      Plug the pool's return lines. This will prevent water from backflowing into the pool. Disconnect the pool heater

10. 4.      Cover your pool. This will protect it from debris and the elements. Use a high-quality pool cover that is specifically designed for winter use. Cover your pool

11. Winterize your swimming pool

12. 1.      Add an algaecide to the pool. This will help to prevent algae growth during the winter. Add an algaecide to the pool

13. 2.      Add a winterizing chlorine floater to the pool. This will help to maintain a low chlorine level throughout the winter. Add an algaecide to the pool

14. 3.      Check your pool's water chemistry periodically throughout the winter. If necessary, adjust the pH, alkalinity, and chlorine levels. Add an algaecide to the pool

15. Springtime

16. When you are ready to open your pool in the spring, simply remove the pool cover, disconnect the winterizing chlorine floater, and reconnect the pool heater and filter. Then, shock the pool and balance the water chemistry. Once the water is clear and balanced, your pool is ready to use again!

17. 
    

www.clearwaterpools.com