Papers (International)

1. Formability prediction of perforated sheet metal by representative volume element and homogenized sheet models, Manufacturing Letters, 2024

2. Elastic properties of honeycombs with spline curve cell walls, Mechanics of Materials, 2024

3. Smart Control of Springback in Stretch Bending of a Rectangular Tube by an Artificial Neural Network, Journal of Manufacturing Science and Engineering(JMSE)-transactions of the ASME, 2023

4. On Kinematics in Sequential Three-Dimensional Stretch Bending: Analytical Springback Model, Journal of Manufacturing Science and Engineering(JMSE)-transactions of the ASME, 2023

5. A strategy for on-machine springback measurement in rotary draw bending using digital image-based laser tracking, The International Journal of Advanced Manufacturing Technology(IJAMT), 2020

6. Structure–processing–property relationships of 3D printed porous polymeric materials, ACS Materials Au, 2021

7. Effect of stretching on springback in rotary stretch bending of aluminium alloy profiles, Key Engineering Materials, 2021

8. A computer vision-based, in-situ springback monitoring technique for bending of large profiles, 24th International Conference on Material Forming (ESAFORM 2021), 2021

9. A feasibility study of continuous grain refinement of sheet metal, Procedia Manufacturing, 2020

10. Flexible 3D stretch bending of aluminium alloy profiles: an experimental and numerical study, Procedia Manufacturing, 2020

11. Exploring the influence of pre/post-aging on Springback in Al-Mg-Si alloy tube bending, Procedia Manufacturing, 2020

12. In-line springback measurement for tube bending using a laser system, Procedia Manufacturing, 2020

Papers (Korea)

1. Effect of Fillet Radius Variation in Hollow Aluminum Profiles on Stretch Bending and Cross-Sectional Distortion, Journal of Advanced Engineering and Technology, 2026

(중공 알루미늄 프로파일의 필렛 반경 변화가 스트레치 굽힘 및 단면 왜곡에 미치는 영향, 공학기술논문지, 2026)

2. Structural Design and Numerical Evaluation of a Water-Level-Responsive Passive Flood Barrier under Hydrostatic Loading, Journal of the Korean Society of Manufacturing Process Engineers, 2026

(정수압 하중을 고려한 수위 감응식 무동력 차수문의 구조설계 및 수치해석 기반 평가, 한국기계가공학회지, 2026)

3. Finite Element Analysis of the Tensile Behavior of Functionally Graded Auxetic Structures Based on Bezier Splines, Journal of the Korean Society of Manufacturing Process Engineers, 2026

(베지어 스플라인 기반 경사기능 오제틱 구조의 인장 거동 유한요소해석, 한국기계가공학회지, 2026)

4. Finite Element Analysis of Cross-sectional Deformation of Hollow Rectangular Tubes in Multi-axis Stretch Bending Processes, Transactions of Materials Processing, 2026

(다축 스트레치 벤딩 공정 시 중공 사각 튜브의 단면 변형에 관한 유한요소해석, 소성가공학회지, 2026)

5. Investigation of Thermo-Mechanical Responses of a Solid-State Laser Gain Medium(Nd:YAG) under Different Cooling and Constraint Conditions, Journal of Advanced Engineering and Technology, 2025

(고체레이저 이득매질(Nd_YAG)의 냉각조건 및 구속조건에 따른 열-기계 응답특성 연구, 공학기술논문지, 2025)

6. Thermally Induced Mirror Deformation by a High-power Laser System, Journal of the Korean Society of Mechanical and Aviation Technology, 2024

(고출력 레이저 시스템의 반사경 열변형에 관한 연구, 한국기계항공기술학회지, 2024)

7. A Study on Structural Design of a Spherical Mirror using Geometric Shapes, Journal of the Korean Society of Mechanical and Aviation Technology, 2024

(기하학적 형상을 응용한 구면 반사경 구조설계에 관한 연구, 한국기계항공기술학회지, 2024)

8. Lightweight Design of a Spherical Mirror Based on the Lateral Supports: a Comparative Study with Honeycomb-Patterned Structures, Journal of the Korean Society of Mechanical and Aviation Technology, 2024

(구면 반사경의 측면 지지점을 이용한 반사경 경량화 설계:허니컴 패턴과 비교 연구, 한국기계항공기술학회지, 2024)

9. Deformation Analysis based on the Pivot Location of Bend Dies in 3D Stretch Bending, Journal of the Korean Society of Manufacturing Process Engineers, 2024

(3차원 스트레치 벤딩에서 금형의 피벗 위치에 따른 소재의 변형 분석, 한국기계가공학회지, 2024)

10. A Study on Honeycomb Structures of a Spherical Mirror using Finite Element Analysis, Journal of the Korean Society of Mechanical and Aviation Technology, 2024

(유한요소해석을 이용한 구면 반사경의 허니컴 구조 연구, , 한국기계항공기술학회지, 2024)

11. An experimental study on cross-sectional deformation in 2D tube bending: stretch, bending sequence and bending angle, Transactions of Materials Processing, 2024

(2차원 튜브벤딩의 단면변형에 관한 실험적 연구: 인장, 벤딩 시퀀스 및 벤딩 각도 중심으로, 소성가공학회지, 2024)