Principal Investigator (PI)
Changho Lee, Ph.D.
Professor
Professor Changho Lee joined Chonnam National University in 2014 as an Assistant Professor. His research interests are in the fields of fundamental behavior of geo-materials, geotechnical instrumentation from laboratory to the field (predominantly wave-based), particle-scale geotechnical engineering, engineering implications of polymerized/bio-treated granular materials and emerging geotechnical engineering. He has recently expanded his scope of influence into; Dynamic Soil-Structure Interactions (SSI) using Geo-Centrifuge Test and Numerical Modelling, Geo-statistical Assessment of Seismic Liquefaction Probability, Synthesis and Characterization of binary mixtures.
Current Researchers
email: kasareboakye@hotmail.com
Kingsley is a licensed Civil Engineer and earned his bachelor's degree from Kwame Nkrumah University of Science and Technology, Ghana in 2018 and his MS in August, 2025 in Chonnam National University. He has held Geotechnical and Laboratory Manager and Project Manager roles in Ghana and Liberia respectively.
Research focus: Multi hazard detection and risk mitigation, Geotechnical reliability
(ORCID: 0000-0003-4903-8504)
email: raksmeyga2016@gmail.com
Raksmey earned an engineering degree in Civil Engineering from the Institute of Technology of Cambodia in 2021. Prior to pursuing the integrated Master's–Ph.D. program, he worked as a Structural Engineer, where he was responsible for structural design, including foundation systems.
Research focus: Regional geotechnical site characterization, Settlement, Ground improvement
(ORCID: 0009-0009-3746-4283)
email: chiendavith2003@gmail.com
Davith earned a Bachelor of Science in Civil Engineering from Paragon International University, Cambodia, in 2024. Before joining the integrated Master's–Ph.D. program, he worked as a Geotechnical Junior Engineer with experience in geotechnical data analysis, excavation monitoring, and geotechnical modeling..
Research focus: Geomaterial development, Deep excavations
(ORCID: 0009-0003-7224-4629)
email: ledung.ltd23@gmail.com
Dũng had his bachelor studies in Vietnam at Thuyloi University and graduated in 2024.
Research focus: Dredged soil characteristics, Microscale modelling
(ORCID: 0009-0003-9834-0598)
email:maryamayad176@gmail.com
Mryam gained her bachelor diploma in 2021 from Istanbul Gelişim University, Turkey and previously was an intern.
Research focus: Binary mixtures characterization
Alumni
email: vvmi6vv@naver.com
Mr. Kim works with Jinwha Technology Co., Ltd.
Thesis: Physical and chemical characterizations of Bottom Ash for geotechnical applications
email: dothu182@gmail.com
Ms. Do works with SN HITEC VINA Ltd.
Thesis: Electrical conductivity of various clayed soils with respect to porosity and ion concentration.
email: usee12@naver.com
Mr. Choi is an engineer at Dong-A Engineering & Construction.
Thesis: Influence of non-cohesive plastic fine contents on shear modulus and damping ratio of spherical material mixtures.
email: ngovanlinh.dhtl@gmail.com
Dr. Linh is a lecturer in the Geotechnics Division at Water Resources University, Vietnam.
Dissertation: Geo-Centrifuge Experiments and Numerical Simulation for Investigation of Structure-Soil-Structure Interaction.
email: r.ewusiwilson@gmail.com
Dissertation: Artificial Intelligence Applications in Dynamic Compaction.
email: emmanuelike2000@gmail.com
Dr. Ike is currently a lecturer in the Geophysics Unit at Modibbo Adama (Federal) University in Nigeria.
Dissertation: Fabric Map Formation/Control and Electrical Conductivity of Fine Grained Soils with Ionic Concentration and pH Effects.
email: smurfs712@naver.com
Gyungtae is on a work-study in Australia
Project: Evaluation of properties of MgO-based CLSM according to lignin content.
email: smurfs712@naver.com
Taehoon is pursuing graduate studies at Hanyang University.
Project: Shear wave velocity using bender element in unsaturated media.
email: nhunq6nk@wrn.vn
Thesis: Thermo-Hydro-Mechanical (T-H-M) Numerical Simulation.
email: kevin001005@naver.com
Beomjun is currently working at Daewoo E&C.
Project: Controlled Low-strength Material (CLSM).