Price: 25USD
Basic specifications:
Vin: 3 to 16v
Vout= 1v to Vin minus 200mv
Size 18.5mm x 9.5mm
At the moment, No shop feature has been set up, You can purchase a driver by contacting me on discord (Giannis_TDM#4434) Or to my email giannislasershack@gmail.com
Reverse polarity protection
No load protection
PWM enabled (IC pin 4)
Low feedback voltage minimizing the required shunt value (typ 95mv @30c)
Pre tested and shipped with personalized Oscilloscope captures and set current readouts.
Warnings:
If used in any test setup, Discharge the output caps with any metallic object across the 2 pins (A and C). Failure to do so will result in permanent damage to the diode and/or driver.
Due to the sensitive nature of such electronics I can't offer a warranty, Feel free to contact me if you have any issues and I will do my best to resolve the problem.