How to instantly fix Brother printer error code 30?

Brother Printer is an amazing printer that has seamless printing quality, amazing services, and outstanding updates. However, there are certain technical issues associated with Brother Printer wifi setup or fixing error code 30. However, if you are stuck with error 30, you are expected to follow and apply a few important instructions that are explained here. Have a look at the steps to resolve the issues.

Common Causes behind Brother Printer Error code 30

Before fixing it, you are supposed to know the reasons behind the emergence of the issue. A few of the reasons are common typical and explained below:

  • Maybe the error occurs when both the springs that are located on either side of the carriage are out of their actual places.

  • Maybe the print head carriage fails to return to its original place.

  • Maybe the cartridge covers would not be locked properly.

Easy and Instant Ways to fix Brother Printer Error code 30

However, there are different ways to resolve or troubleshoot the issue; you can have a look at the steps that are explained here:

Method 1:

  • You must open the cover of the scanners with the help of the plastic tab, which is located at the left and right sides of the machine.

  • Now, you must shift the print head and then bring it to the middle.

  • Now, you should make sure that there is no piece of paper or anything stationary kept

  • Now, once cleared, you should close the cover and then try printing a sample document.

Method 2 :

  • First of all, you should hold the scanner cover by using the plastic tab in an open position.

  • Now, slide the print head again and towards the right side under the cover.

  • Now, use a lint-free cloth, grab the encoder strip firmly on both sides and then scrub the cloth down the strip at least thrice from one end to another end.

  • Now, you should try printing a sample document now and then check the status of the error.

Method 3 :

  • In the third set, you should check the position of the encoder strip

  • Now, you must open the printer and again insert the strip

  • Restart your printer, and then try printing a sample document in order to check the printing quality

By implementing the above-stated steps, you can simply find out the ways to fix the issue. The users do witness issues associated with the Brother Printer Default password, but that could be fixed too by executing the steps properly.