SolidWorks

Pressure plate process:

Pressure plate Product:

Fillets product:

Pressure plate process:

Presure plate draing.pdf

First I made a circular sketch

I then extruded

I then repeated but within/ concentric to the first circle

Next i cut-extruded a sketch on the center point

I then filleted the outer round edges

Next i extruded a circular sketch

I then cut extruded a hole through my extrusion

I then filleted and used a circular pattern on that future

Lastly i filleted the edges of that pattern

Pressure plate Product:

Product assigemnt kgajhgnjklgkfdfd.pdf

First i made 2 planes for lofting

Next i made 2 sketches rotated

offset to each other

I then lofted the 2 shapes

I then made a sketch on the top of my lofted shape along a circular pattern

I then boss extruded my sketch

I then filleted the edge of my extrusion

Next I made a circular pattern and duplicated the extrusion around the lofted shape

Lastly I added a dome to the underside of my shape

Lesson one:

Lesson two:

Mate one

First i mated the interfacing faces

Mate two

Then i concentricly mated the fillets

The end

The end

Lesson 3:

Fillets:

First I filleted the edge

(round constant)

I then filletted the edge

I then mirrored the object

Lastly I entered the key hole for attachment

Fillets product:

First

First i did a constant fillet

Next

Second i did a variable fillet on every corner

Lastly

For my last fillet I did a face fillet between the top and side

Page updated

Google Sites

Report abuse