C81 De Cicco D. and F. Taheri. Understanding the Parameters that Influence Buckling of 3D Fiber-Metal Laminates. In the Proceedings of the 10th Canada-International Conference on Composites, 17-20 July 2017, Ottawa, Canada.
C80 Asaee Z. and F. Taheri. A Practical Analytical Model for Predicting Response of 3D Fiberglass Fabric Subjected to Impact Loading. In the Proceedings of the 10th Canada-International Conference on Composites, 17-20 July 2017, Ottawa, Canada.
C78 Asaee Z. and F. Taheri. Experimental Studies on the Impact Response of 3D Fiberglass Fabric Subject to Different Size Impactors. American Society for Composites 31th Technical Conference, Williamsburg, Virginia. Sept. 2016
C77 Asaee Z. and F. Taheri. Characterization of the Mechanical and Impact Response of a New-Generation 3D Fiberglass Fabric. American Society for Composites 30th Technical Conference, Michigan State University. August 2015
C76 Ahmadi-Moghadam B. and F. Taheri. Development of Hybridized Graphene Nanoplatelets/Fiber-Reinforced Composites with Enhanced Interlaminar Fracture Toughness. Proceedings of the 10th Canada-Japan Workshop on Composites, 19-21 August 2014, Vancouver, Canada.
C75 Ahmadi-Moghadam B., B. Soltannia and F. Taheri. Detection in graphene nanoplatelet/ CFRP composites using electric resistance change. Proceedings of the 19th International Conference on Composite Materials ICCM19) July 28 to August 2: 3597-3607, 2013, Montreal, Quebec, Canada.
C74 Soltannia B. and F. Taheri. Influence of tensile impulse and strain rate on the response of adhesively bonded single lap joints. Proceedings of the 19th International Conference on Composite Materials ICCM19) July 28 to August 2, 2013, Montreal, Quebec, Canada.
C73 Razi, P. and F. Taheri. Application of a Remote Health Monitoring System for Pipeline Bolted Joints. In the proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference PVP2012, Paper 78611, July 15-19, 2012, Toronto, Ontario, CANADA.
C72 Eslami S. and F. Taheri. Degradation of perforated E-glass/epoxy plates submerged in water and acidic media under elevated temperature. In the proceedings of the Second Joint US-Canada Conference on Composites. Montreal, Canada, Sept. 2011.
C71 Razi, P. and F. Taheri. Vibration-based detection of fatigue cracks in structures. Proceedings of SPIE Smart Structures/NDE Conference, San Diego, CA, March 4-11, 2011.
C70 Hazara T., J. Gu and F. Taheri. An innovative cost effective approach towards tension control in automated filament winding composite manufacturing. 2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011: 961-966, 2011.
C69 Esmaeel R. and F. Taheri. Assessment of Inter-Adhesive and Interlaminar Stresses in a Tubular Adhesively Bonded Joints With A Delamination. In the proceedings of Society for Advancement of Materials and Process Engineering Conference (SAMPE 2010), Seattle, WA. May 2010.
C68 Yahyaei-Moayyed M., F. Taheri (2010). Creep response of glulam reinforced by a novel pre-stressed FRP-wood composite system. Proceeding of the 11th World Conference on Timber Engineering, Trentino, Italy.
C67 Briand J.C., Rezaei D. and F. Taheri. Damage Detection of a Condensation Pipeline Joint in-Service. Proc. of Smart Structures & Materials/NDE Conference, Vol. 7649, Paper 76491T, Mar 07-11, 2010, San Diego, CA, USA.
C66 Shouman A and Taheri F. An Investigation into The Behaviour of Composite Repaired Pipelines Under Combined Internal Pressure and Bending. Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering. Honolulu, Hawaii., 3:111-118, 2009.
C65 Shouman A. and F. Taheri. Parametric Study on the Response of Composite Repaired Pipelines under Combined Loading Conditions. Proc. of American Society of Composites (1st American/Canadian Joint Conference), Sept 15-17, Delaware, USA.
C64 Fatemi, A., Kenny, S., Sen, M., Zhou, J., Taheri, F. and Paulin, M. Influence of material and geometric imperfections on the local buckling response of plain and girth weld high strength pipelines. Proc., 5th International Pipeline Technology Conference, PIPE-56, 22p. 2009.
C63 Fatemi, A., Kenny, S., Sen, M., Zhou, J., Taheri, F. and Paulin, M.. Parameters affecting the buckling and post-buckling behaviour of high strength pipelines.” Proc., OMAE2009-79578, 9p. 2009.
C62 Nourpanah, N. and F. Taheri. A Parametric Study Of Strain Concentration In Field Joint of Concrete Coated Pipelines Using Finite Element. Proceedings of the ASME Pressure Vessels and Piping Conference, v 3:117-123, 2010,
C61 Arjomandi K. and F. Taheri. Influence of the type of geometrical imperfection on the response of steel pipes subject to pure bending. Proceedings of the International Offshore and Polar Engineering Conference, p 443-448, 2009,
C60 Al-Showaiter, F. Taheri and S.P. Kenny, Parametric Study on the Effect of Girth Weld Induced Imperfections on the Local Buckling Response of Pipelines. Proc., IPC2008-64004, 9p.
C59 Nourpanah, N. and F. Taheri. Finite Element analysis of strain concentration in field joint of concrete coated pipelines. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, v 3: 35-40, 2009.
C58 Shahin, K. and F. Taheri. Fracture and Fatigue Behaviour of Adhesively Bonded joints in Sandwich Composite Beams. Proceedings of the 2nd International Conference on Advanced Computational Engineering and Experimenting (ACE‐X2008), Barcelona, Spain, July 2009.
C57 Shahin, K. and F. Taheri. A simple and practical solution for characterization of adhesively bonded joints in dissimilar materials Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007, v 3,2008: 739-744.
C56 Iranpour, M. and F. An experimental investigation into fatigue characterization of oil platform risers under variable amplitude Loading. Proceedings of the ASME Pressure Vessels and Piping Conference – V. 3, Design and Analysis, 2008: 289-299b.
C55 Fatemi F., S. Kenny, M. Sen, J. Zou, F. Taheri and M. Pullin, Investigations on the local buckling response of High Strength Linepipe, Proceedings of IPC 2008 International Pipeline Conference, September 29 – October 3, 2008 Calgary, Alberta, Canada, Paper No. IPC08-64407.
C54 Iranpour M., F. Taheri and J. K. Vandiver, Fatigue characterization of long dynamic risers in deep waters.
Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering 2007, OMAE2007, 2007, V.4: 147-157
C53 Iranpour M. and F. Taheri The state-of-the-art review of risers' VIV fatigue. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, v 2006, Proceedings of 25TH International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2006, 2006, 12p.
C52 Fatemi A., S.P. Kenny And F. Taheri. Continuum Finite Element Methods To Establish Compressive Strain Limits For Offshore Pipelines In Ice Gouge Environments. Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering 2007, V.5 OMAE2007: 149-155.
C51 Lu Y., F. Taheri and M. Gharghouri, Fatigue Properties of High Pressure Die-Cast Magnesium Am60b Alloy, Proceedings SAE World Congress & Exhibition, Fatigue Research and Applications, Paper Number: 07M-137, April 2007.
C50 Hosseinzadeh R., N. Cheraghi, and F. Taheri. An Effective Computational Parametric Approach For Optimization of Adhesively Bonded Tubular Joints Subject To Torsion Loading, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Design Engineering, 2006, 5p
C49 Shahin K. and F. Taheri. Optimization of Single-Strap Composite Joints, To be published in the proceedings of ASME International Mechanical Engineering Congress & Exposition, Chicago, IL, Nov. 2006.
C48 Kumar S.S., M.R. Islam and F. Taheri. Neuro-Fuzzy Approach for Damage Detection and Suggestive Repair Mechanism, In the proceedings of 2005 International Conference on Computational & Experimental engineering & Science, 1-6 December 2005, Hyderabad, India.
C47 Kumar S.S., F. Taheri and M.R. Islam Artificial Intelligence and Image Processing Approaches in Damage Assessment and Material Evaluation, In the proceedings of Iinternational Conference on Computational Intelligence for Modeling Control and Automation - CIMCA 2005 and International Conference on Intelligent Agents, Web Technologies and Internet, 2005 : 307-313.
C46 Han H., J.Q. Chen. F. Taheri and N. Pegg. The Non-Linear Response of Aluminum Cylindrical Shells with a Cut-Out Subjected to Axial Compression. In the proceedings of CASI 2005: Conference on Aerospace Technology and Innovation, Toronto, Ontario, 26 & 27 April 2005.
C45 Cheraghi N., M.J. Riley, and F. Taheri. `In Adhesively bonded Joints In Plastic Pipes Based On Vibration Method Using Piezoelectric Sensors. In the Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics, v 4, 2005, p 3472-3478
C44 Kumar S. and F. Taheri. Neuro-Fuzzy Approaches In Damage Detection And Material Evaluation. In the proceedings of The Fifth Canadian International Conference on Composites (CANCOMP), Vancouver, Canada, August 16-19, 2005.
C43 Cheraghi N., GP Zou and F. Taheri. Piezoelectric-Based Pipeline Damage Assessment Using Energy based of Fourier and Wavelet Analysis. In the proceedings of The Fifth Canadian International Conference on Composites (CANCOMP), Vancouver, Canada, August 16-19, 2005.
C42 Shahin K., GP Zou and F. Taheri. Novel Analytical Solutions for Adhesively Bonded Joints Integrated with Shape Memory Alloy Wires. In the proceedings of The Fifth Canadian International Conference on Composites (CANCOMP), Vancouver, Canada, August 16-19, 2005.
C41 Taheri F., D. Prior, H. Vaziri and R. Islam, A Novel Petroleum Well Completion Technique. Proceedings of International Conference on Composite Science and Technology; ISSCT/5, 2005: 413-418.
C40 Taheri F. and G.P. Zou, Impact and Damping Response of FRP strengthened Glulam Beams. In the Proceedings of The Fourth Canadian International Conference on Composites (CANCOMP), August 2003.
C39 Zou GP. and F. Taheri. An J-Integration Model for Adhesively Bonded Composite Panels-to-flanges Joints. In the Proceedings of the Fourth Canadian International Conference on Composites (CANCOMP), August 2003.
C38 Riley M.J., and F. Taheri. An Overview of the Capabilities of Various Smart Sensors and the Associated Control Algorithm. Proceedings, Annual Conference - Canadian Society for Civil Engineering, v 2003, CSCE 31st Annual Conf. Proceedings: Specialty Conf. and Offshore Engineering Specialty Conference, 2003: 2213-2222.
C37 Taheri F., S. Bell and B. Halpin, Static Response of FRP Strengthened Sawn Timber And Glulam Beams, In Structural Health Monitoring, Edited by A.A. Mufti, ISIS Canada Publication, September 2002: 375-384.
C36 Riley, M.J, and F. Taheri. An In-depth Look at The Effectiveness of Smart Materials For Monitoring and Control of Composite Structural Panels, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 3, 2002: 97-103.
C35 Zhang, Z. and F. Taheri. Numerical Investigation on Dynamic Pulse Buckling of Slender FRP Composite Laminated Beams Subject to an Axial Impulse, In Developments in Theoretical and Applied Mechanics, Vol XXI, Edited by: A.J. Kassab, D.W. Nicholson and I. Ionescu, 2002: 237-246.
C34 Zhang, Z. and F. Taheri Dynamic Pulsebuckling Analysis of FRP Composite Laminated Beams Using LS-DYNA, In the proceedings of LS-DYNA Users Conference, April 2001.
C33 Taheri F. and M. Hassan, Optimum Design and development of a cost-effective pultruded hybrid composite mast, Proceedings of the Third Canadian International Composites Conference, August 2001: 622-629.
C32 Moradi S. and F. Taheri. On Multiple Delamination Buckling of Composite Structures, In the Proceedings of the Eleventh International Conference on Composite Materials (ICCM-12), Mechanical Properties Volume (CD-ROM), Paris, France, July, 1999.
C30 Moradi S. and F. Taheri. Application of The Differential Quadrature Method to The Analysis of Delamination Buckling of Composite Beam-Plates, In "Computer Modelling and Simulations in Engineering", Ed: S.N. Atluri, Tech Science Press, May 1997: 1238-1243.
C29 Jalali S.J., and F. Taheri. Evaluation of the Elastic Properties of Fiber Reinforced Composites by the Varying-span Method, In the Proceedings of the Eleventh International Conference on Composite Materials (ICCM-11), V, August 1997: 625-634.
C28 Jalali J. and F. Taheri. Application of An Effective Solution on General Laminated Plates Under Cylindrical Bending With Shear Coupling, In the Proceedings of Fourth International Conference in Civil Engineering, Tehran, Iran, 2, April 1996.
C 27 Jalali J. and F. Taheri. Effect of Damping on Energy Absorbing Capacity of Fiber Reinforced Composite, Proceedings of the Tenth International Conference on Composite Materials (ICCM-10), Vol IV, August 1995: 399-406.
C26 Smyth, A.B., D.W. Jones, A.S. Rizkalla, F. Taheri, and M. Cross, Effect of Cement Modulus in the Femoral Hip Implant System, Fifth World Biomaterials Congress, May 29-June 2, 1996, Toronto, Canada.
C25 Morceau A. and F. Taheri. Elastic Moduli Measurements of SiC Reinforced Alumina at High Temperatures Using Laser-Ultrasonics, In the Proceedings of the VII International Symposium on Nondestructive Characterization of Materials. June 19-23, 1995, Prague, Czech. Republic.
C 24 Morceau A. and F. Taheri. Elastic Moduli Measurements of Composite Ceramics at High Temperatures Using Laser-Ultrasonics, ENERCOMP'95, Technomics Publishers, March 1995: 683-692.
C23 Taheri F., A Coupled Heat Transfer-Displacement Constitutive Modelling of Alumina in Terrestrial and Microgravity Environment, In the transactions of the International Symposium on Development and Applications of New Ceramics and Metal Alloys, Quebec City, Canada, August 29-September 2, 1993.
C22 Koko, T.S, F. Taheri, C.G. DesRochers, M.W. Chernuka, S. Hall, and D. Smigelski, Evaluation of the strength of Mechanically Fastened Joints in Composite-Metal Aircraft Battle Damage Repairs, in the proceedings of the CADCOMP-94, 4th International Conference in Composite Aided Design in Composite Materials Technology, South Hampton, UK, July 1994: 339-346.
C21 Nespoli, O.G., F. Taheri, and G. Tynes, Development of Non-axisymmetric multi-member Graphite Epoxy Joint for Space Trusses, in the proceedings of the 9th International Conference on Composite Materials, Society for Advanced Materials Processing Engineering (SAMPE), Madrid, Spain, July 12-16, 1993.
C20 Taheri F. and J.G. Murphy. Modelling of Ceramic to Metal Brazed Joints; a Fracture Mechanics Finite Element Approach, Proceedings of the International Symposium on Advances in Processing of Ceramic and Metal Matrix Composite, 28th Annual Conference of Metallurgists of CIM, Pergamon Press, 281- 293, Aug. 20-24, 1989.
C19 Taheri F. and A.A. Mufti. Quality Assurance of a Special Purpose Fracture Mechanics Finite Element Program; A Case Study, in the Proceeding of 2nd International Conference of National Agency for Finite Element Methods & Standards, U.K., May 1989.
C18 Mufti A.A., N.G. Zamani, J.F. Porter, F. Taheri and L.T. Russell, Prediction of Fatigue Crack Propagation based on Finite Elements Fracture Analysis, Proceedings of the International Conference on Finite Elements in Computational Mechanics, Dec. 1985, Bombay, India.
C17 Carmichael D., A.A. Mufti, F. Taheri and J.G. Murphy, Fracture Mechanics of Reinforced Concrete Using Finite Element, Proceedings of 1989 Canadian Society of Civil Engineering Annual Conference, St. John's, NFLD., May 1989.
In Proceedings Refereed Based on Abstract
C16 Riley, MJ. And . Taheri. Investigation into the Viability of Implementing Piezoelectric Patches for Monitoring and Control of Vibration in Composite Plates. In the proceedings of the 2nd Conference on Emerging Machinery and Structural Condition Monitoring Technologies for Defence Applications, 8-10 September 2004.
C15 Han H.H. and F. Taheri. Stability Enhancement Of Composite Columns Using Shape Memory Alloys. In the Proceedings of the 11th International Conference in Composite Engineering (ICCE11), Ed. D. Hui: 243-244, August, 2004.
C14 Yuen, B. K. C. and F. Taheri. Dalhousie University, and P. A. Rushton,Investigation Into Fatigue Crack Propagation of Ductile and Brittle Materials Subjected to Variable Amplitude Loading”, In the proceedings of 10th CF/DRDC MEETING on NAVAL APPLICATIONS OF MATERIALS TECHNOLOGY, Dartmouth N.S., May 2003: 13-15.
C13 Taheri F, M. Riley, and R. Islam, A Critical Review of Materials Available for Health Monitoring and Control of Offshore Structures. Accepted for presentation in the 51st Canadian Chemical Engineering Conference, October 2001.
C12 Naghipour M., F. Taheri and G. Zou, A Modified Approach for Evaluation of Damping of Composite Beams. In Proceddings of 19th Canadian Congress of Applied Mechanics (CANCAM 2003), June 2003.
C11 Taheri F, R. Islam and M. Riley, Guidelines For Offshore Structure Monitoring. Accepted for presentation in the 51st Canadian Chemical Engineering Conference, October 2001.
C10 Gallant, B.K. and F. Taheri. Novel Application of Computer Methods to Perform Limit States Design of Glulam Tudor Arch Stiffened With Fiber Reinforced Plastics. CSCE Annual Conference, Victoria, Canada, June 2001. RECEIVED THE BEST PAPER AWARD IN THE CONFERENCE
C9 Taheri F. and I.R. Widiarsa, On the Parameters Influencing the bonding capacity of FRP Rehabilitated Reinforced-concrete Beams, plates, In the Proceedings of the 5th International Conference in Composite Engineering (ICCE7), Ed. D. Hui: 845-846, July, 2000.
C8 Taheri F. and S. Moradi, Application of a Simple and Effective Computational Tool for the Complete Assessment of Delamination Buckling and Post Buckling of Composite Beam/plates in the Proceedings of the 5th International Conference in Composite Engineering (ICCE7), Ed. D. Hui: 845-846, July, 2000.
C7 Moradi S., and F., Taheri Delamination Buckling Analysis of General Laminated Composite Plates by Differential Quadrature Method, in the Proceedings of the 5th International Conference in Composite Engineering (ICCE5), Ed. D. Hui: 871-873, July, 1998.
C6 Taheri F. and G.P. Zhu Prediction of Hot Pressing Residual Stresses in a Whisker-Reinforced Ceramic Composite by A Viscoelastic Finite Element Method, in the Proceedings of the 2th International Conference in Composite Engineering (ICCE2), Ed. D. Hui:. 737-738, July, 1995.
C5 Taheri F. and A.A. Mufti. FAST; A Computer Aided-Design Program for Fracture Mechanics, Proceedings of Sixth Annual Congress of ASCE, Structural Division, Aug. 1987, Orlando, Florida, 12-27.
C4 Koko, T.S., F. Taheri, C.G. DesRochers, M.W. Chernuka, S.R. Hall and D.T. Smigelski, Failure Studies on Metal-to-Composite Aircraft Battle Damage Repair Joints, in the Proceedings of the 3rd Canadian Forces ASIP Symposium, Ottawa, Ontario, Canada, September 13-15, 1994.
C3 Koko, T.S., F. Taheri, C. DesRochers and M. Chernuka, Assessment and Application of Failure Criteria for Mechanically Fastened Joints in Composite to Metal Aircraft Battle Damage Repairs, in the Second Aircraft Structural Integrity Program-ASIP Symposiums proceedings, A1-A8, Ottawa, Canada, May 26-29, 1993.
C2 Taheri F. and D. Crick, Finite Element Analytical Techniques for Ceramic Production in Microgravity II Proceedings of Spacebound 91, April 29-30, 1991, Ottawa, Ontario, Canada, 241-246.
C1 Taheri F. and A.A. Mufti, Prediction of the Angle of Crack Propagation and the Fracture Load by a Numerical/Graphical Algorithm, Proceedings of 3rd Canadian Forces/CRAD Conference, June 1989, Halifax, Nova Scotia..