30 cm × 20 cm CW20 20 g/m2, 2-layers spread carbon for tail repair
30 cm × 20 cm CW30 30 g/m2, 2-layers spread carbon for tail wing
30 cm × 20 cm CW40 40 g/m2, 2-layers spread carbon for wing repair
30 cm × 20 cm CW57 57 g/m2, 3-layers spread carbon for boom and fuselage repair and local reinforcement
15 cm × 20 cm 3-layer uni-direction fabric for spar repair
30 cm × 20 cm woven carbon fabric 163 g/m2 for fuselage repair and local reinforcement
30 cm × 20 cm woven glass fabric, 80 g/m2 for 2.4 GHz friendly repair
5 m carbon tow/roving IMS 65, 5 m carbon tow/roving UMS40
Cascell RS 30 foam core material
Sandpaper 320, sandpaper 120
carbon D-box for tail and wing repair
thick film and tape for applying bondage when repairing the wing and fuselage
F3X価格:12,800円
Density: 11 g/m2
Fiber type: IMS 60 (Intermediate Modulus Carbon Fiber IMS60 E13 24K 830tex)
Number of layers: 2
The direction of fibers in the layers tacking: -45°; +45° or +45°; -45°;
Sheet size: 1250 mm × 400 mm
F3X価格:9,800円
Density: 15 g/m2
Fiber type: IMS 60 (Intermediate Modulus Carbon Fiber IMS60 E13 24K 830tex)
Number of layers: 2
The direction of fibers in the layers tacking: -45°; +45° or +45°; -45°;
Sheet size: 1550 mm × 500 mm
F3X価格:13,800円
Density: 20 g/m2
Fiber type: IMS 65 (Intermediate Modulus Carbon Fiber IMS65 E23 24K 830tex).
Number of layers: 2
The direction of fibers in the layers tacking: +45°; -45° or -45°; +45;
Sheet size: 1550 mm × 600 mm
This carbon fabric is ideal for the manufacture of all ultra-light parts glider / aircraft / sailplane models, especially for stabilizer and fin of DLG glider models.
When manufacturing very thin parts, such as trailing edges of wings and tails of model airplanes, it could be possible that these are becoming warped if no mirrored lay-ups are used. For this reason we offer the Carboweave® CW 20 in +/- 45° and in -/+ 45° fiber orientation.
F3X価格:12,800円
Density: 30 g/m2
Fiber type: IMS 65 (Intermediate Modulus Carbon Fiber IMS65 E23 24K 830tex).
Number of layers: 2
The direction of fibers in the layers tacking: +45°; -45° or -45°; +45;
Sheet size: 1550 mm × 600 mm
This carbon fabric is ideal for the manufacture of all ultra-light parts glider / aircraft / sailplane models, especially for stabilizer and fin of DLG glider models.
When manufacturing very thin parts, such as trailing edges of wings and tails of model airplanes, it could be possible that these are becoming warped if no mirrored lay-ups are used. For this reason we offer the Carboweave CW 30 in +/- 45° and in -/+ 45° fiber orientation.
F3X価格:12,800円
Density: 40 g/m2
Fiber type: IMS 65 (Intermediate Modulus Carbon Fiber IMS65 E23 24K 830tex).
Number of layers: 2
The direction of fibers in the layers tacking: -45°; +45° / +45°; -45;
Sheet size: 1550 mm × 600 mm
This carbon fabric is ideal for the manufacture of all ultra-light parts glider / aircraft / saliplane models, especially for stabilizer and fin of DLG glider models.
When manufacturing very thin parts, such as trailing edges of wings and tails of model airplanes, it could be possible that these are becoming warped if no mirrored lay-ups are used. For this reason we offer the Carboweave CW 40 in +/- 45° and in -/+ 45° fibre orientation.
F3X価格:12,800円