Embedded Files
CO2 CNC Lasers work by bouncing light emissions back and forth between mirrors on an XYZ axis until the beam passes through a special lens at the tip of the router head. Types of cutting material can range from thin plywood, acrylic and cardboard.
CO2 CNC Lasers work by bouncing light emissions back and forth between mirrors on an XYZ axis until the beam passes through a special lens at the tip of the router head. Types of cutting material can range from thin plywood, acrylic and cardboard.
Project 1 - Wooden Scan
Project 1 - Wooden Scan
For this project I used scans and one cut to create this project. I scanned the image and the text so that it was engraved and then cut the circle surrounding it.
IMG_0218.MOV
Project 2 - Acrylic Cut and Scan
Project 2 - Acrylic Cut and Scan
For this project I used cuts and scans to bring this project to life. I scanned the truck so that it was lightly engraved, scanned the border of the Chevy badge, and cut out the inside of it, then cut the circle surrounding the whole design, so that it would be it's own piece.
IMG_0276.MOV
3rd Project - Cardboard Box
3rd Project - Cardboard Box
For this project, I created the blueprint of the box using makercase.com, then imported it into Vcarve to add the text, then into RDworks and sent it to the laser cutter. I used tape to hold it together since it wouldn't stand on it's own.
IMG_0332.MOV
Page updated
Google Sites
Report abuse