Checklists

Victory Sprayer Checklist

Device Startup


  • Fill fluid reservoir with FreshBreeze TB to 750 ml mark

  • Install fluid reservoir on sprayer body

  • Ensure lock switch in locked position

  • Install battery

  • Ensure there is a spare battery in charger

  • Ensure top switch is set to "on" position

  • Ensure nozzle is set at red/ 40 microns

  • Fill with FreshBreeze TB to 750 ml mark

  • Install fluid reservoir on sprayer body

  • Ensure lock switch in locked position

  • Install battery

  • Ensure there is a spare battery in charger

  • Ensure top switch is set to "on" position

General Notes

  • The electrostatic sprayer provides uniform surface coverage with very minimal product discharge.

  • The sprayer tip should be about two feet from the target surface.

  • The electric charge will draw the spray into hard-to-reach places...you DON’T have to spray into corners, let the electricity do the work.

  • Surfaces will be slightly wet to touch BUT there should not be liquid running down vertical surfaces or dripping from horizontal surfaces.

  • Done correctly there is no need to rinse surfaces with clean water.

  • Although spraying “in the area of” electronics is generally not harmful DO NOT SPRAY DIRECTLY ONTO electronic equipment.

Disinfection Checklist

  • Open all doors to the unit for airflow

  • Clean bulk trash or contamination

Begin Disinfection in the Cab

  • Avoid window and door glass

  • Avoid radio, MDC

  • A very light coating is all you need

  • Allow 2-min dwell time

  • Wipe MDC, mobile radio, switches, unit radio with “monk” wipes*

  • Leave the doors open to continue airing out after being disinfected

Move to the patient compartment.

  • Clean up all trash and debris

  • Wipe up liquids, body fluids, and solid matter with disposable cloths or towels

  • Move front to back, top to bottom.

  • Spray all non-electronic surfaces and equipment with disinfectant solution

  • Allow 2-min dwell time

  • Wipe all electronic equipment with “monk” wipes

  • Spray outside door handles with disinfectant solution

Disinfect the stretcher.

  • Remove any linens and place in the hospital linen collection bin

  • Spray all areas of the stretcher [including the straps and mattress]

  • Allow 2-min dwell time

Demobilization

  • Discard remaining fluid in fluid reservoir

  • Discharge 750 ml of clean water through sprayer

  • Wipe sprayer and place in provided storage solution

  • Place battery on charge

~END~