Voltage Divider Project

This project uses two resistors to crate a voltage divider network that controls the speed of the robot.

Voltage Divider

The robot is programmed to travel 10 wheel revolutions, and the voltage between the two resistors determines the speed this distance is traveled. Changing the resistor under test with a higher or lower value resistor will change how fast the robot travels.

The project details will be listed below:

The sample CEENBoT Commander program program to measure the voltage of the resistor divider network, and convert that into the speed setting of the robot is found here:

>> Resistor / Voltage Divider Sample Program (.zip)

A picture of the sample CEENBoT Commander program is here:


Program - Voltage Divider