International Journals
[54] D. Kim, J. Lee, “Multiscale topology optimization for the design of spatially-varying three-dimensional lattice structure ”, Computer Methods in Applied Mechanics and Engineering , vol. 429, pp. 117-140, 2024
[53] D. Kim, J. Lee, “A Review of Physics Informed Neural Networks for Multiscale Analysis and Inverse Problems”, Multiscale Science and Engineering, vol. 6, pp. 1-11, 2024
[52] D. Kim, Y. Ji, J. Lee, J. Yoo, S. Min, I.G. Jang, "A MATLAB code of node-based topology optimization in 3D arbitrary domain for additive manufacturing", Structural and Multidisciplinary Optimization, vol. 65, no. 11, pp. 1-17, 2022
[51] C. Lee, J. Lee, I.G. Jang, "Topology optimization for the manufacturable and structurally safe synchronous reluctance motors with multiple iron webs and bridges," IEEE Transactions on Industrial Electronics, vol. 70, no. 1, pp. 678 - 687, 2022
[50] T. Jung, J. Lee, T. Nomura, and E.M. Dede, “Inverse design of three-dimensional fiber reinforced composites with spatially-varying fiber size and orientation using multiscale topology optimization,” Composite Structures, vol. 279, p. 114768, 2022.
[49] C. Kim, J. Lee, and J. Yoo, “Machine learning-combined topology optimization for functionary graded composite structure design,” Computer Methods in Applied Mechanics and Engineering, vol. 387, p. 114158, 2021.
[48] Y. Jung, J. Lee, and S. Min, "Multi-material topology optimization considering joint stiffness using a two-step filtering approach," Finite Elements in Analysis and Design, vol. 197, p. 103635, 2021.
[47] D. Lee and J. Lee, “Comparison and Validation of Numerical Homogenization Based on Asymptotic Method and Representative Volume Element Method in Thermal Composites,” Multiscale Science and Engineering, vol. 3, pp. 165-175, 2021.
[46] C. Lee, J. Lee, and I.G. Jang, "Shape optimization-based design investigation of the switched reluctance motors regarding the target and current limitation," Structural and Multidisciplinary Optimization, vol. 64, pp. 859-870, 2021.
[45] J. Lee, C. Kwon, J. Yoo, S. Min, T. Nomura, and E.M. Dede, “Design of spatially-varying orthotropic infill structures using multiscale topology optimization and explicit de-homogenization,” Additive Manufacturing, vol. 40, p. 101920, 2021.
[44] T. Jung, J. Lee, and J. Lee, “Design and Fabrication of Magnetic System Using Multi-Material Topology Optimization,” IEEE Access, vol. 9, pp. 8649-8658, 2021.
[43] S. Park, J. Lee, and J. Lee, “Multi-material topology optimization of permanent magnet synchronous motors,” International Journal of Applied Electromagnetics and Mechanics, vol. 67, no. 4, pp.461-472, 2021.
[42] J. Lee, J. Lee, T. Jung, and J. Yoo, “Topology optimization for three-dimensional design of segmented permanent magnet arrays,” Structural and Multidisciplinary Optimization, vol. 62, no. 6, pp. 3089–3104, 2020.
[41] M. Yoon, J. Lee, and B. Koo, “Shape design optimization of thermoelasticity problems using isogeometric boundary element method,” Advances in Engineering Software, vol. 149, p. 102871, 2020.
[40] D. Kim, J. Lee, T. Nomura, E. M. Dede, J. Yoo, and S. Min, “Topology optimization of functionally graded anisotropic composite structures using homogenization design method,” Computer Methods in Applied Mechanics and Engineering, vol. 369, p. 113220, 2020.
[39] J. Lee, T. Nomura, and E. M. Dede, “Topology optimization of magnetic composite microstructures for electropermanent magnet,” Journal of Magnetism and Magnetic Materials, vol. 503, p. 166596, 2020.
[38] J. Lee and J. Lee, “Multiscale Analysis of Heterostructured Electropermanent Magnet in Magnetic Actuators,” Multiscale Science and Engineering, vol. 2, no. 1, pp. 20–26, 2020.
[37] J. Lee and J. Lee, “Magnetic force enhancement using air-gap magnetic field manipulation by optimized coil currents,” Applied Sciences, vol. 10, no. 1, p. 104, 2020.
[36] J. Lee, B. Kim, J. Yang, and S. Lee, “Fuel Quantity Estimation of Aircraft Supplementary Tank Using Markov Chain Monte Carlo Method,” International Journal of Aeronautical and Space Sciences, vol. 20, no. 4, pp. 1047–1054, 2019.
[35] W. Sung and J. Lee, “Implementation of SOH estimator in automotive BMSs using recursive least-squares,” Electronics, vol. 8, no. 11, pp. 1–14, 2019.
[34] T. Nomura, A. Kawamoto, T. Kondoh, E. M. Dede, J. Lee, Y. Song and N. Kikuchi, “Inverse design of structure and fiber orientation by means of topology optimization with tensor field variables,” Composites Part B: Engineering, vol. 176, p. 107187, 2019.
[33] J. Lee, J. Yoo, S. Min, and M. Yoon, “Topology optimization of anisotropic magnetic composites in actuators using homogenization design method,” Structural and Multidisciplinary Optimization, vol. 60, no. 4, pp. 1423–1436, 2019.
[32] J. Lee, T. Nomura, and E. M. Dede, “Asymptotic homogenization of magnetic composite for controllable permanent magnet,” Composites Part B: Engineering, vol. 161, no. October 2018, pp. 128–140, 2019.
[31] J. Lee, “Multiscale Finite Element Analysis of Linear Magnetic Actuators Using Asymptotic Homogenization Method,” Multiscale Science and Engineering, vol. 1, no. 1, pp. 70–75, 2019.
[30] H. K. Seong, C. W. Kim, J. Yoo, and J. Lee, “Multiphase topology optimization with a single variable using the phase‐field design method,” International Journal for Numerical Methods in Engineering, vol. 119, no. 5, pp. 334–360, 2019.
[29] J. Lee, D. Kim, T. Nomura, E. M. Dede, and J. Yoo, “Topology optimization for continuous and discrete orientation design of functionally graded fiber-reinforced composite structures,” Composite Structures, vol. 201, no. pp. 217–233, 2018.
[28] K. Kim and J. Lee, “Determination of nonconductive coating thickness using electrical contact conductance and surface profile,” Coatings, vol. 8, no. 9, p. 310, 2018.
[27] W. Sung and J. Lee, “Improved capacity estimation technique for the battery management systems of electric vehicles using the fixed-point iteration method,” Computers & Chemical Engineering, vol. 117, pp. 283–290, 2018.
[26] J. Lee, S. W. Lee, K. Kim, and J. Lee, “Multi-Material Topology Optimization of Magnetic Actuator with Segmented Permanent Magnets,” IEEE Transactions on Magnetics, vol. 54, no. 7, pp. 3–8, 2018.
[25] J. Lee, M. Yoon, T. Nomura, and E. M. Dede, “Topology optimization for design of segmented permanent magnet arrays with ferromagnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 449, pp. 571–581, 2018.
[24] A. Takezawa, J. Lee, and M. Kitamura, “Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization,” Optimization and Engineering, vol. 19, no. 1, pp. 19–38, 2018.
[23] H. Jin, J. Park, D. Kum, and J. Lee, “Magnetic flux waveform estimation for fast efficiency map calculation in permanent magnet synchronous motors,” International Journal of Applied Electromagnetics and Mechanics, vol. 56, no. 3, pp. 373–386, 2018.
[22] D. Kim, Y. Kim, D. Lee, B. Kim, and J. Lee, “Electrode configuration optimization for maximizing throughput of dielectrophoretic particle separator,” J. Mech. Sci. Technol., vol. 31, no. 12, pp. 5951–5960, 2017.
[21] J. Lee, T. Nomura, and E. M. Dede, “Topology optimization of Halbach magnet arrays using isoparametric projection,” J. Magn. Magn. Mater., vol. 432, pp. 140–153, 2017.
[20] B. Hwang, D. Lee, B. Kim, and J. Lee, “Numerical simulation and experimental validation for a novel dielectrophoresis activated cell sorter to achieve high throughput and efficiency,” Journal of Mechanical Science and Technology, vol. 30, no. 8, pp. 3749–3755, 2016.
[19] W. Sung, D. S. Hwang, B.-J. Jeong, J. Lee, and T. Kwon, “Electrochemical battery model and its parameter estimator for use in a battery management system of plug-in hybrid electric vehicles,” International Journal of Automotive Technology, vol. 17, no. 3, pp. 493–508, 2016.
[18] K. Kim and J. Lee, “Reciprocal sliding friction model for an electro-deposited coating and its parameter estimation using Markov Chain Monte Carlo method,” Materials, vol. 9, no. 4, p. 237, 2016.
[17] W. Sung, D. S. Hwang, J. Nam, J.-H. Choi, and J. Lee, “Robust and Efficient Capacity Estimation Using Data-Driven Metamodel Applicable to Battery Management System of Electric Vehicles,” Journal of The Electrochemical Society, vol. 163, no. 6, pp. A981–A991, 2016.
[16] S. W. Lee, J. Lee, and S. Cho, “Isogeometric Shape Optimization of Ferromagnetic Materials in Magnetic Actuators,” IEEE Transactions on Magnetics, vol. 52, no. 2, pp. 1-8, 2016.
[15] J. Lee, W. Sung, and J. H. Choi, “Metamodel for efficient estimation of capacity-fade uncertainty in Li-Ion batteries for electric vehicles,” Energies, vol. 8, no. 6, pp. 5538–5554, 2015.
[14] M. Son, J. Koo, B. Kim, S. P. Jang, and J. Lee, “Design optimization of a methane-fuel rocket combustor with a genetic algorithm,” Journal of Mechanical Science and Technology, vol. 29, no. 4, pp. 1457–1463, 2015.
[13] T. Nomura, E. M. Dede, J. Lee, S. Yamasaki, T. Matsumori, A. Kawamoto and N. Kikuchi, “General topology optimization method with continuous and discrete orientation design using isoparametric projection,” International Journal for Numerical Methods in Engineering, vol. 101, no. 8, pp. 571–605, 2015.
[12] J. Lee and S. W. Yoon, “Optimization of magnet and back-iron topologies in electromagnetic vibration energy harvesters,” IEEE Transactions on Magnetics, vol. 51, no. 6, pp. 1-7, 2015.
[11] K. Kim, J. Lee, and J. H. Choi, “Development of a fatigue model for low alloy steels using a cycle-dependent cohesive zone law,” Advances in Mechanical Engineering, vol. 6, p. 124037, 2014.
[10] E. M. Dede, T. Nomura, and J. Lee, “Thermal-composite design optimization for heat flux shielding, focusing, and reversal,” Structural and Multidisciplinary Optimization, vol. 49, no. 1, pp. 59–68, 2014.
[9] J. Lee and S. W. Yoon, “Topology Design Optimization of Electromagnetic Vibration Energy Harvester to Maximize Output Power,” Journal of Magnetics, vol. 18, no. 3, pp. 283–288, 2013.
[8] J. Lee, E. M. Dede, D. Banerjee, and H. Iizuka, “Magnetic force enhancement in a linear actuator by air-gap magnetic field distribution optimization and design,” Finite elements in analysis and design, vol. 58, pp. 44–52, 2012.
[7] J. Lee, T. Nomura, and E. M. Dede, “Heat flow control in thermo-magnetic convective systems using engineered magnetic fields,” Applied Physics Letters, vol. 101, no. 12, p. 123507, 2012.
[6] E. M. Dede, J. Lee, Y. Guo, L. Q. Zhou, M. Zhang, and D. Banerjee, “Kilohertz magnetic field focusing and force enhancement using a metallic loop array,” Applied Physics Letters, vol. 101, no. 2, p. 023506, 2012.
[5] E. M. Dede, J. Lee, Y. Liu, B. Robert, and S. H. Yonak, “Computational methods for the optimisation and design of electromechanical vehicle systems,” International Journal of Vehicle Design, vol. 58, no. 2–4, pp. 159–180, 2012.
[4] J. Lee, E. M. Dede, and T. Nomura, “Simultaneous design optimization of permanent magnet, coils, and ferromagnetic material in actuators,” IEEE Transactions on Magnetics, vol. 47, no. 12, pp. 4712–4716, 2011.
[3] D. Banerjee, J. Lee, E. M. Dede, and H. Iizuka, “Kilohertz magnetic field focusing in a pair of metallic periodic-ladder structures,” Applied Physics Letters, vol. 99, no. 9, p. 093501, 2011.
[2] J. Lee, J. H. Seo, and N. Kikuchi, “Topology optimization of switched reluctance motors for the desired torque profile,” Structural and Multidisciplinary Optimization, vol. 42, no. 5, pp. 783–796, 2010.
[1] J. Lee and N. Kikuchi, “Structural topology optimization of electrical machinery to maximize stiffness with body force distribution,” IEEE Transactions on Magnetics, vol. 46, no. 10, pp. 3790–3794, 2010.
International Conference
[11] Yonghwa Ji*, Jaewook Lee, "Multiscale Topology Optimization of Spatially-varying Structures for Heat Flux Manipulation", WCSMO, Ireland, 2023. 06.
[10] Dohun Lee*, Jaewook Lee, "Unit-cell Design of Electromagnetic Wave Absorbing Sandwich Core using Topology Optimization", WCSMO, Ireland, 2023. 06.
[9] Jaewook Lee*, "Topology optimization in magnetic fields using homogenization design method", ACSMO 2020, Online, 2020. 11
[8] Jaejoon Lee, Jaewook Lee*, "Design Optimization of Current Distribution for Magnetic Force Enhancement in Actuators", ACSMO 2020, Online, 2020. 11
[7] Jaejoon Lee*, Jaewook Lee, "Topology Optimization to Improve Vibration Response of Electric Motors for Hybrid Electric Vehicles", COMPUMAG, Paris, France, 2019. 07.
[6] Jaewook Lee*, Tsuyoshi Nomura, Ercan M. Dede, "Topology optimization of functionally graded fiber-reinforced composite for compliant mechanism design", WCSMO 13, Beijing, China, 2019. 05.
[5] Taehoon Jung*, Jaejoon Lee, "Topology Optimization of Coupled Magnetic Field and Thermal Problems in Magnetic Actuators", WCSMO 13, Beijing, China, 2019. 05.
[4] Jaewook Lee*, Tsuyoshi Nomura, Ercan Dede, "Pattern Design of Permanent Magnet Segments using Topology Optimization", WCCM XIII, New York, USA, 2018. 07.
[3] Dongjn Kim*, Jaewook Lee, "Auto Parameter Tuning in Topology Optimization Using Deep Reinforcement Learning", WCCM XIII, New York, USA, 2018. 07.
[2] Dongjn Kim*, Jaewook Lee, "Complexity control in topology optimization result usingreinforcement learning", ACSMO, Dalian, China, 2018. 05.
[1] Jaejoon Lee*, Jaewook Lee, "Design of permanent magnet in actuators using topology optimization", ACSMO, Dalian, China, 2018. 05.
Student awards
[6] "2022년 대한기계학회 학술대회 (본부)", 석사과정 정주안, 2023. 05.
[5] "2021년 대한기계학회 CAE 및 응용역학부문 우수논문상", 박사과정 김동진, 2022. 05.
[4] "2021년 한국멀티스케일역학회 심포지움 최우수 포스터 논문상", 박사과정 이도훈, 2021. 12.
[3] "2020년 GIST 창업 아이디어 경진대회, 우수상", 박사과정 이재준, 2020. 11.
[2] "2020년 대한기계학회 CAE 및 응용역학부문 우수논문상", 박사과정 지용화, 2020. 08.
[1] "2020년 대한기계학회 CAE 및 응용역학부문 우수학생발표상", 박사과정 이도훈, 2020. 08.