Dr. Narendrakumar Amrutlal Patel

Name : Narendrakumar A. Patel 

Father’s Name : Amrutlal G. Patel 

Date of Birth : 10-05-1981 

Gender : Male 

Nationality : Indian. 

Languages known : Gujarati,Hindi, English 

Other Interests : Cricket, Table Tennis, Volley Ball 

My Strengths : Commitment towards work, Honesty and Integrity, Workaholic nature, Ability to continuous learning. 

PAN No : ALWPP2508D

Aadhar No : 8291 0463 7276 

Ph. D. (Mechanical) Dec ’21 

“Real Time Optimization and Automatic Manipulation of Machining Parameters Through Adaptive Control Methods.” 

Gujarat Technological University  

M. Tech. (CAD/CAM) Aug ’07 – Aug ’09 

U. V. Patel College of Engineering Ganpat University, Kherva 

Result : 85.5%  (Gold)

B.E in Mechanical Engineering Aug ‘98 – June’02 

Government Engineering College, Modasa, India 

Result – 78.8 (Gold) 

1. Worked as a Design Engineer in L & T Limited, Hazira works, Surat for 1.5 year.  

2. Working as a Assistant Professor in Mechanical Engineering Department, Ganpat University, Ganpat Vidyanagar, Kherva, Mehsana, Gujarat for 7.5 Years.  

3. Working as a Assistant Professor in Mechanical Engineering Department, Government Engineering College, Palanpur, Gujarat for 11 Years 6 Months

4. Working as a Assistant Professor in Mechanical Engineering Department, Government Engineering College, Patan, Since November 2022 

SKILLS: 

ENVIRONMENT:  

• DOS, Windows, Office, 

• Proficient with Internet  

• Computer Added Design & Drafting (CADD).  

• Computer Added Manufacturing (CAM) and Automation  

• Manufacturing Processes and Manufacturing Automation  

• Operating and Part programming for CNC Turning and Machining Center.  

• Enough knowledge about Computer hardware and Software 

SOFTWARE PACKAGES:  

• Autodesk AutoCAD, Inventor  

• Can work with MasterCAM and Unigraphics NX6 software for preparing CNC part program and interfacing with CNC machine  

• Can efficiently worked with Pro-Engineering (Especially I can do better modeling, assembly, detailing, kinematic and dynamic mechanism simulation and analysis, static analysis and optimization by using ProMecahnica).  

• Basic operating and knowledge about other 

• CAD software like Solid Works, Solid Edge and CATIA  Static analysis Using ANSYS 10  

• Efficiently worked with “STADD Pro” for steel structure analysis.  

• Patron and Nastran for Structural Analysis 

INTERFACING:  

• Interfacing of CNC Turning center and machining center with computer for Online Manufacturing by using Master CAM and Unigraphics NX6. 

1. Induction Training (Phase - I) was conducted from 13-02-2012 to 24-02-2012 at NITTTR, Ext. Centre, Ahmedabad.
   
   

2. Induction Training (Phase - II) was conducted from 09-03-2012 to 14-09-2012 at NITTTR, Ext. Centre, Ahmedabad.
   
   

3. Developing PEO's, PO's and CO's of degree and diploma programme for mechanical and allied branches was conducted from 30-09-2013 to 10-04-2013 at NITTTR, Ext. Centre, Ahmedabad.
   
   

4. Latest Development in CAD/CAM and PLM Technologies was conducted from 11-10-2014 to 15-11-2014 at IIT RAM, Ahmedabad.
   
   

5. CATIA for Mechanical and Allied Engineering was conducted from 25-05-2015 to 29-05-2015 at NITTTR, Ext. Centre, Ahmedabad.
   
   

6. CATIA for Mechanical Engineering was conducted from 28-11-2016 to 12-02-2016 at NITTTR, Ext. Centre, Ahmedabad.
   
   

7. Academic Audit and Preparation for NBA Accreditation was conducted from 14-05-2018 to 18-05-2018 at NITTTR, Ext. Centre, Ahmedabad.
   
   

8. Innovation and Advancement in Conventional Industrial Welding Practices was conducted from 28-05-2018 to 06-08-2018 at LDCE, Ahmedabad.
   
   

9. Entrepreneurship Development was conducted from 03-11-2019 to 15-03-2019 at EDII, Gandhinagar.
   
   

10. Industrial Based NDT Training and Practices was conducted from 07-08-2019 to 07-12-2019 at GEC, Gandhinagar.
    
    

11. Comprehensive Online Intellectual Property Rights (IPR) was conducted from 07-06-2020 to 14-09-2020 at Gujarat Students Startup and Innovation Hub (i-Hub).
    
    

12. UDAYAM (Unlimited Digital Advanced Yearlong Academic Method of Learning) E-Content Development Course was conducted from 28-07-2020 to 18-08-2020 at Knowledge Consortium of Gujarat, Education Department, Government of Gujarat.
    
    

13. Nurturing Innovation and Startup Ecosystem (NISE) was conducted from 09-08-2020 to 23-10-2020 at Gujarat Students Startup and Innovation Hub (i-Hub).
    
    

14. Recent Trends in Advanced Manufacturing Processes was conducted from 04-05-2021 to 04-09-2021 at L E College, Morbi.
    
    

15. Processing and Characterization of Materials (PCM) was conducted from 19-09-2022 to 23-09-2022 at GEC, Gandhinagar.
    
    

16. Smart Industry was conducted from 27-03-2023 to 31-03-2023 at NITTTR, Bhopal.
    
    

17. Exploring Measurement and Control in Robotics using Arduino and IoT Devices was conducted from 31-07-2023 to 08-04-2023 at IIT RAM, Ahmedabad.
    
    

18. Student Assessment was conducted from 01-01-2024 to 01-06-2024 at MOOC.

19. Embedded System Mastery: Development & Debugging Techniques course with SkyySkill Academy  from 27/03/2026 to 28/03/2026.

• Has been worked in Fabrication of 800 Crore Costing Offshore platform (MNW Platform) as a Design Engineer at Larson and Tubro Limited at Hazira Works, Surat. 

• Computer Integrated Manufacturing, J A Vadher and Prof. N A Patel, Books India Publications, Ahmedabad, June, 2014  

• Computer Aided Manufacturing, J A Vadher and Prof. N A Patel, Books India Publications, Ahmedabad, June, 2016. 

• AI Content Creation : AI Content Developer for the subject(s) "COMPUTER AIDED MANUFACTURING", during the State level AI-Assisted Content Creation Initiative.

• "Enhancing Manufacturing Efficiency through Design for Manufacturability: A Cost and Time Optimization Approach",  Intelligent Manufacturing and Human – Machine Interface: Challenges and Opportunities, Annual Technical Volume of Production Engineering Division Board, The Institution of Engineers (India), pg. 52-59

• “Open Source CMS Selection - A Mystery”, International Journal on Computer Science and Engineering (IJCSE), ISSN : 0975-3397 NCICT 2010 Special Issue, pg. 24-28  

• “A Review on Transient Thermal Analysis for Top Head Nozzle of Crack Gas Drier by Finite Element Method”, International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 www.ijera.com Vol. 2, Issue 2,Mar-Apr 2012, pp.339-345  

• “An Experimental Investigation On The Performance Of Cutting Tool Under Vibration Behavior With Variable System Parameters”, International Journal Of Creative Research Thoughts, © 2021 IJCRT | Volume 9, Issue 5 May 2021 | ISSN: 2320-2882, Pg. e814 to e823  

• “Implementation of Adaptive Control for Cutting Tool Vibration Minimization”, International Journal for Research in Engineering Application & Management (IJREAM) ISSN : 2454-9150 Vol-07, Issue-02, MAY 2021, DOI : 10.35291/2454-9150.2021.0262 © 2021, IJREAM All Rights Reserved, p.g. 398-403.  

• “Cantilever Beam Analogy for the Performance Assessment of Cutting Tools”, International Journal for Research in Engineering Application & Management (IJREAM) ISSN : 2454-9150 Vol-07, Issue-01, APR 2021, p.g. 105-111.  

• “Performance Assessment Of Cutting Tools–A Review”, Volume 11, Issue 12, December 2020, pp. 3202-3209, Article ID: IJARET_11_12_302 ISSN Print: 0976- 6480 and ISSN Online: 0976-6499 DOI: 10.34218/IJARET.11.12.2020.302, p.g. 3202 -3209 

• "An Optimization of Cutting Parameters in Hot Turning Machining Process- A Review", International Journal of Mechanical Engineering, Vol. 7, No. 4, April 2022, ISSN: 0974-5823, Pg. 472-476

• "Effect of Drilling Parameters on Different Fibre Reinforced Polymer Materials with Different Thickness", International Journal of Mechanical Engineering, Vol. 7, No. 4, April 2022, ISSN: 0974-5823, Pg. 477-486

• "Modeling and Parametric Analysis of Surface Roughness in Hot Turning of EN 36 Steels", International Journal of Applied Engineering & Technology, Vol. 5, No. 3, September 2023, ISSN: 2633-4828, Pg. 705-711 .

• "Evaluating the Cooking Oil Container Filling Machine's Performance by Altering the Actuation Devices (Experimental Methods)", International Journal of Applied Engineering & Technology, Vol. 5, No. S6, Oct-Dec 2023, ISSN: 2633-4828, Pg. 166-175 

• “A Review on development of adaptive control system for tool vibration minimization and feed optimization for turning center”, International Conference on Emerging Trends in Mechanical Engineering, Feb. 24-25,2017,G. H. Patel College of Engineering & Technology, Vallabh Vidyanagar- 388120 , Gujarat, India 

• “Finite Element Analysis Of Single Point Beam Type Load Cell To Optimize It’s Measuring Range”, Golden Jubilee International Conference on RECENT ADVANCES IN MANUFACTURING (RAM2010), 19-21 JULY 2010 S.V. National Institute of Technology, Surat – 395 007, Gujarat, India 

• “Improper Lubricants & Particle Size Effect On Vibration Level Of Ball Bearing : A Review”, Third International & Twenty forth All India Manufacturing Technology Design & Research Confenrence-2010 (3rd international & 24th AIMTDR-2010), By Andhra University College Of Engineering(A) , Andhra University, Visakhapatnam-530 003 , Andhra Pradesh , India. 

• “Centrifugal Separator Performance Characterization By Focusing Bearing Service Life”, Proc. of the 3rd International Conference on Advances in Mechanical Engineering, January 4-6, 2010, S.V. National Institute of Technology, Surat – 395 007, Gujarat, India 

• “Performance Evaluation of Edible Oil Drum Filling Machine ByChanging Control Devices (Experimental Methods)”, Proc. of the International Conference on ‘Advances in Mechanical Engineering’, December 15-17, 2008, S.V. National Institute of Technology, Surat – 395 007, Gujarat, India 

• “Modelling & Analysis Of Ball Bearing –Skf-6310 Mc/3 Of Oil Separator To Optimise It’s Performance”, Golden Jubilee National Conference On Recent Advances In Manufacturing (RAM-2010) 19-21JULY 2010S.V. National Institute of Technology, Surat – 395 007, Gujarat, India.  

• “Results Of Vibration Level Due To Contaminated Lubricants Of Ball Bearing : A Review”, Golden Jubilee National Conference On Recent Advances In Manufacturing (RAM 2010) 19-21july 2010, S.V. National Institute of Technology, Surat – 395 007, Gujarat, India.  

• “Design & Analysis Of Strain Guage Based Load Cell to Optimize it’s Performance”, All India National Conference on Advancement & Futurastic Trends In Mechanical & Material Engineering ,1st May 2010 Yagyavalkya Institute of Technology,Jaipur (Raj) – 302020.  

• “Determination of deformation (crake propagation) of deep groove ball bearing (SKF-6310 mc/3) through FEM-method-Ansys”, All India National Conference On Advancement & Futuristic Trends in Mechanical & Material Engineering 30-Apr & 1-May,2010,Yagyavalkya Institute of Technology, Jaipur, Rajsthan.  

• “Application and implementation of RFID techniques in manufacturing industries”, National Conference on Innovations in Engineering & Technology, (IET 2008), Takniki Shiksha Vidyarthi Parishad in association with Poornima Group of Colleges, Jaipur  

• “Performance Issues and its Solutions for Mobile Computing”, National Conference on Innovations in Engineering & Technology, (IET 2008), Takniki napatel.cadcam.googlepages.com Shiksha Vidyarthi Parishad in association with Poornima Group of Colleges, Jaipur  

• “Holonic Control Concept For Packaging Under Virtual Manufacturing Environment”, National Conference on Engineering Technology for Sustainable Development: Opportunities & Challenges, 18th & 19th January, 2008  

• “Optimizing the cost and manufacturing time by improving design of manufacturing”, NCDDM_2007 National Conference on Design Dynamics and Manufacturing SLIET Longowal (Pb), (16-17 March 2007) 

• "Basics of Pro-Engineer", U. V. Patel College of Engineering, Ganpat University, In-House Training on Pro-E, 2007

• "Laboratory Session – CAD/CAM Interfacing", U. V. Patel College of Engineering, Ganpat University, STTP, 2007

• "CNC Part Programming (2-Hrs)", VPMP Polytechnic, Gandhinagar, Short Term Training Programme, 2010

• “Mobile and Vehicle Robot”, SIT, Rajpur, Robotics Engineering workshop, 9th Feb 2011.  

• “CNC Programming”, VPMP Polytechnic,Gandhinagar, STTP on CAM, 2011  

• "CNC Part Programming", Sankarsinh Bapu College, Gandhinagar, VII Sem Students (60 Students), 2012

• "NC, CNC Machine Tools Introduction and Classifications", U. V. Patel College of Engineering, Ganpat University, Short Term Training Programme, 2013

• "CNC Part Programming", U. V. Patel College of Engineering, Ganpat University, Short Term Training Programme, 2013

• "Adaptive Control Machine Tools", U. V. Patel College of Engineering, Ganpat University, Short Term Training Programme, 2013

• “Basics of CNC“,VPMP Polytechnic,Gandhinagar, Expert Lecture, September 2013.  

• "Automatic Machine Tools", VPMP Polytechnic, Gandhinagar, Expert Lecture for Sem V Students (120 Students), 2013

• “CNC Machine Construction, Classification, Working, Part Programming & Adaptive Control” , U V Patel College of Engineering, Ganpat University, Kherva, STTP on CAM, 2014  

• “Computer Aided Design”, SIT, Rajpur, Expert Lecture, 2014.  

• “Recent Trends in Computer Aided Manufacturing”, G. P. Vadnagar, Expert Lecture, February 2015.  

• “CNC Machining and Programming”, Manav Rachna International Institute of Research and Studies, Faridabad, September 2020.  

• “CNC Machining and Programming”, Government Engineering College, Patan, Webinar, Octomber 2020.  

• “FEM Recent Way of Design”, K. D. Polytechnic, Patan, Webinar, November 2020.  

• “Adaptive Control in Machine Tools”, Gokul Globle University, FDP on “Recent trends in Mechanical Engineering” , July 2021. 

• "Finite Element Method and its Application in Machine Design",  K. D. Polytechnic, Patan, Webinar, 15 October 2022.

• "Finite Element Method and its Application in Machine Design", K. D. Polytechnic, Patan, Webinar, 02 March 2024. 

• "INTRODUCTION OF HERTZIAN CONTACT STRESS",  K. D. Polytechnic, Patan, Webinar, 02 March 2024. 

• "Application of Additive Manufacturing in Electrical Vehicles",  FDP on Electric Vehicles: Tribology and Additive Manufacturing EVTAM July 23 rd - 27 th 2024, 24 July 2024, Vellore Institute of Technology, Andhra Pradesh.

• "Robotics and AI in Modern Agriculture", Expert Session at the Regional Science Centre, Patan, organized by the Gujarat Council of Science and Technology (GUJCOST), Department of Science and Technology, Government of Gujarat.

• "SWOC Analysis", Vision and Mission Development through Strategic SWOC Insights, NBA PEDAGOGY for Mechanical Engineering, Civil Engineering, Electrical Engineering, Robotics and Automation department of Government Engineering College, Gandhinagar on 24/07/2025 .

• "Sustainable Development Goals " and "Refinement of Institute Vision and Mission" at NBA Mentor Meeting on 10/02/2026.

• "Fundamentals of NC/CNC and Machine Architecture", Workshop on NC & CNC Programming for Modern Manufacturing on 23/03/26 at Gujarat Technological University Institute of Technology & Research (GTU-ITR)

• “Awareness and Implementation of SSIP” – One day Workshop under SSIP, August-2019.  

• “ How to Start Startup?” – Webinar, Under SSIP, Octomber 2020.  

• “How to start Business through SSIP "-Webinar, SSIP, Octomber 2020. 

•  “Begin with an Entrepreneurial Mindset "-Webinar, SSIP, Octomber 2020.  

• “Career in Engineering and Job Opportunities” – Webinar, December 2020  

• “Role of Mechatronics in innovation"-Webinar, SSIP, Septemer 2021. 

• Has actively worked in Consultancy for Development of Workshop at Pandit Dindhayal Petroleum University. It includes the infrastructure requirement, layout and Purchasing for Machine shop, Fitting Shop, Carpentry Shop, Welding Shop and Foundry. 

• Has Actively worked in Consultancy for Development of 14 Vrundavan Gam (One Village from one Taluka) Vrundavan Gram Yogana (Banaskantha District) under District Rular Development Officer (DRDO).

• Gold Medal - B. E. Mechanical Engineering - North Gujarat University - Mechanical Branch First -2002 

• Gold Medal - B. E. Mechanical Engineering - North Gujarat University - University First -2002 

• Gold Medal - M. Tech. (CAD/CAM) Mechanical Engineering - Ganpat University University - Branch First - 2009  

• Gold Medal - M. Tech. (CAD/CAM) Mechanical Engineering - Ganpat University University - University First -2009

• I2OR - Life Time Achievement Award (International Award) - 2020-21 (Date: 23 Feb 2022)

• AKS Education Award - Global Faculty Award - 2022 (Date of Award: 11th Feb 2023)

• Science Publishing Group (Science PG) - Appointment as a Reviewer of American Journal of Mechanical and Industrial Engineering(AJMIE) ISSN Print: 2575-6079; ISSN Online: 2575-6060 from January 28, 2022 to January 28, 2024 

• American Journal of Mechanical and Industrial Engineer - Editorial Board Member from January 2022 to January 2024.

• Asian Society of Researchers -Joined as a Member of The Asia Society of Researchers (ASR). ASR Member Number: R219093421. 

• Advances in Science, Technology and Engineering Systems Journal (ASTESJ) - Reviewer for Advances in Science, Technology and Engineering Systems Journal. Reviewer Code: AJR0001. Issued Date: 04/04/2022 

• Blue Eyes Intelligence Engineering and Sciences Publication - Member of ‘Editorial Board’ of ‘Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP)’ and it’s journal(s) for year 2023-24. 

• EDWIN GROUP OF JOURNALS  - Member of Edwin Group of Journal (Editorial Member) - 003736620842 Issue Date 13th Dec 2023.

• Green ThinkerZ™ Society - Life Member of Green ThinkerZ™ Society w.e.f. October 2022 

• International Institute of Organized Research (I2OR) - Life Member of International Institute of Organized Research (I2OR) w.e.f. February 2022 

• International Association of Engineers - Member of IAENG. Membership Number - 302832. 5th January 2023.

• International Association of Innovation Professionals - Member of IAOIP Advisory Board for the year beginning July 1, 2022 and ending June 30, 2023. Board of Advisors Nominations for 2022 - 2023.

• Institute for Engineering Research and Publication - Member of  IFERP from 21-01-2022 to 31-12-2022. Membership ID Number : PM94532176.

• International Journal of Creative Research Thoughts - e IJCRT RMS(Reviewer) - Member ID : 117719  from 24th January 2024.

• International Journal of Engineering Research and Technology - Reviwer. Registration No: IJERTREW4457  Date: 18-01-2022.

•  International Journal of Science & Engineering Development Research - Member of referral/review management system. ISSN : 2455-2631  Member ID : 112167 Member Since : 18-January-2022.

• International Society for Development and Sustainability (ISDS) - Associate Membership Date: 30-05-2022.

• Journal of Emerging Technologies and Innovative Research - Review Member (ISSN : 2349-5162) Holding Member ID : 117108.

• Lattice Science Publication - Member of ‘Editorial Board’ of ‘Lattice Science Publication (LSP)’ and it’s journal(s) for year 2023-24.