Publishing Journals (Selected):

Edited Books:

  1. M. Rout and K. Debnath. Forming and Machining of Polymers, Ceramics, and Composites. CRC Press (Taylor & Francis Group), 2024. [ISBN: 9781032527901] LINK
  2. K. Debnath and I. Singh. Primary and Secondary Manufacturing of Polymer Matrix Composites. CRC Press (Taylor & Francis Group), 2017. [ISBN: 9781351228466] LINK

Chapters Contributed to Books:

  1. H. Dutta, J. Jayaramudu, K. Debnath, D.K. Sarma, P. Chetia, and S.P. Selvam. Introduction to Sustainable Manufacturing. In Progress in Sustainable Manufacturing. Springer, pp. 1-10, 2023. 
  2. B.C. Behera, B.R. Moharana, M. Rout, and K. Debnath. Application of Machine Learning in the Machining Processes: Future Perspective Towards Industry 4.0. In Intelligent Manufacturing Management Systems: Operational Applications of Evolutionary Digital Technologies in Mechanical and Industrial Engineering. Wiley, pp. 141-156, 2023.
  3. V. Murugabalaji, M. Rout, and K. Debnath. Tensile Properties and Anisotropy of Cross-Rolled Sheets. In Metal Forming Processes: Developments in Experimental and Numerical Approaches. CRC Press, pp. 169-182, 2022.
  4. P.K. Kharwar, R.K. Verma, K. Debnath, and A. Singh. Synthesis of Catalyst-Free Carbon Nano Onions (CNOs) for Advanced Functional Materials. In Trends in Fabrication of Polymers and Polymer Composites. AIP Publishing, pp. 8-1-8-22, 2022.
  5. K. Debnath and G. Surya Rao. Role of Different Forms of Bamboo and Chemical Treatment on the Mechanical Properties of Compression Molded Green Composite. In Bio-Fiber Reinforced Composite Materials. Springer, pp. 107-124, 2022. 
  6. M. Roy Choudhury and K. Debnath. Current and Future Trends in Micro-Joining and Nano-Joining. In Joining Processes for Dissimilar and Advanced Materials. Elsevier, pp. 209-238, 2022. 
  7. A. Gaikwad, K. Debnath, and M.K. Gupta. Nano-Structured Polymer-Based Composites. In Advances in Machining of Composite Materials: Conventional and Non-Conventional Processes. Springer, pp. 335-367, 2021. 
  8. M. Roy Choudhury and K. Debnath. Machining of Bio-Composites. In Advances in Machining of Composite Materials: Conventional and Non-Conventional Processes. Springer, pp. 421-457, 2021. 
  9. M. Roy Choudhury and K. Debnath. Green Composites: Introductory Overview. In Green Composites. Springer, pp. 1-20, 2021. 
  10. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Development and Characterization of PLA-based Green Composites: Experimental and Simulation Studies. In Green Composites. Springer, pp. 209-223, 2021. 
  11. K. Debnath, M. Roy Choudhury, G. Surya Rao, and R.N. Mahapatra. Milling Behavior of Injection Molded Short Fiber-Reinforced Green Composites. In Machining and Machinability of Fiber Reinforced Polymer Composites. Springer, pp. 149-171, 2021. 
  12. K. Debnath, H. Dutta, and D.K. Sarma. Influence of Different Tool Materials on the Machining Performance in µED-Milling of CFRP Composites. In Machining and Machinability of Fiber Reinforced Polymer Composites. Springer, pp. 207-224, 2021. 
  13. K. Debnath, H. Dutta, and D.K. Sarma. Green Manufacturing of Polymer Composites: A Futuristic Perspective. In Processing of Natural Fiber Reinforced Bio-Composites. Woodhead Publishing India, pp. 155-174, 2020.
  14. R. Chakraborty, M. Pradhan, and K. Debnath. Band-Gap Engineering Using Metal-Semiconductor Interfaces for Photocatalysis and Supercapacitor Application: A Nanoparticle Reinforced Ceramic Composite Perspective. In Interfaces in Particle and Fibre Reinforced Composites: Current Perspectives on Polymer, Ceramic, Metal and Extracellular Matrices. Elsevier, pp. 391-452, 2019. 
  15. T. Bose, S. Roy, and K. Debnath. Detection of Delamination in Fibre Metal Laminates Based on Local Defect Resonance. In Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment. Wiley, pp. 147-164, 2019. 
  16. K. Debnath. Drilling of Composite Laminates Using a Special Tool Point Geometry. In Hole-Making and Drilling Technology for Composites. Elsevier, pp. 63-76, 2019. 
  17. K. Debnath. Application of Ultrasonic-Assisted Machining Process for Making Hole in Composite Laminates. In Hole-Making and Drilling Technology for Composites. Elsevier, pp. 77-87, 2019. 
  18. K. Debnath, S. Roy, T. Bose, S. Adhikari, V. Sinha, and V. Rabha. A Study of Chemical Treatment of Natural Fiber and Its Effect on the Mechanical Properties of Developed Composites. In Processing of Green Composites. Springer, pp. 65-80, 2019. 
  19. K. Debnath, M. Roy Choudhury, and A.E.W. Jarfors. Primary Manufacturing of Thermoplastic Polymer Matrix Composites. In Primary and Secondary Manufacturing of Polymer Matrix Composites. CRC Press, pp. 17-42, 2017.
  20. K. Debnath, M. Roy Choudhury, and T.S. Srivatsan. Secondary Manufacturing Techniques for Polymer Matrix Composites. In Primary and Secondary Manufacturing of Polymer Matrix Composites. CRC Press, pp. 155-172, 2017.
  21. K. Debnath, M. Roy Choudhury, and J.I. Song. Research Progress in the Area of Advanced Machining of Polymer Matrix Composites. In Primary and Secondary Manufacturing of Polymer Matrix Composites. CRC Press, pp. 211-226, 2017.
  22. I. Singh and K. Debnath. Polylactic Acid (PLA) Based Bionanocomposites: A State-of-the-art Review Report. In Biodegradable Polymeric Nanocomposites: Advances in Biomedical Applications. CRC Press, pp. 95-108, 2016.
  23. I. Singh and K. Debnath. Advanced Machining Techniques for Fiber Reinforced Polymer Composites. In Processing Techniques and Tribological Behavior of Composite Materials. IGI Global, pp. 317-340, 2015. 
  24. A.P. Singh, K. Debnath, M. Sharma, and I. Singh. Optimal Control of Drilling Process for Hole Making in Fiber Reinforced Plastics: A Review. In Manufacturing Engineering: New Research. Nova Science Publishers, pp. 33-50, 2015.
  25. I. Singh, K. Debnath, and A. Dvivedi. Mechanical Behavior of Biocomposites Under Different Operating Environments. In Lignocellulosic Polymer Composites: Processing, Characterization, and Properties. Wiley, pp. 417-431, 2014. 
  26. K. Debnath, I. Singh, A. Dvivedi, and P. Kumar. Natural Fiber Reinforced Polymer Composites for Wind Turbine Blades: Challenges and Opportunities. In Recent Advances in Composite Materials for Wind Turbine Blades. World Academic Publishing, pp. 25-39, 2013.
  27. I. Singh, K. Debnath, and A. Dvivedi. Joining of Natural Fiber Reinforced Thermoplastic Composites. In Biomass-Based Biocomposites. Smithers Rapra Publishing, pp. 145-165, 2013.

Peer-Reviewed Journal Papers:

  1. S. Chaurasia, H. Bisaria, S. Singh, and K. Debnath. Powder Mixed Micro-Electric Discharge Milling of Ni-Rich NiTi SMA: An Investigation on Machining Performance and Biocompatibility. Materials and Manufacturing Processes. (Accepted)
  2. A. Gaikwad, M.K. Gupta, and K. Debnath. Characterization of Alkaline-Acid Treated Fiber of Arundo Donax L. from Mature and Immature Plant: A Comparative Study. Biomass Conversion and Biorefinery. (Accepted)
  3. C. Malakar, R. Ravivarman, V.P. Tripathi, K. Debnath, J. Paulraj, and P.V. Chellam. Agro-Based Kenaf/Bamboo/Polylactic Acid (KBP) Hybrid Composites for the Structural Roofing Applications: Statistical Evaluation of Physical and Mechanical Properties. Biomass Conversion and Biorefinery. (Accepted)
  4. M.R. Pal, K. Debnath, and R.N. Mahapatra. Machining Performance Analysis of Ti6-Al-4V in Powder-Mixed EDM Using Green Dielectric Oil. Journal of Molecular and Engineering Materials. (Accepted)
  5. M.R. Pal, K. Debnath, S.K. Sahu, and R.N. Mahapatra. Multi-Objective Optimization and Prediction of Responses Using GRA and ANN in Micro-EDM of Ti6Al4V Using Different Tool Materials. Journal of Advanced Manufacturing Systems. (Accepted)
  6. M.R. Pal, K. Debnath, G. Surya Rao, and R.N. Mahapatra. Micro-EDM of Ti-6Al-4V Using Various Tool Materials: Multi-Response Optimization and Surface Characterization. Surface Review and Letters. (Accepted)
  7. A. Das, A. Gautam, A. Panda, S.R. Das, K. Debnath, Ch. Ramakrishna, and S.K. Patel. Comparative Performance Evaluation Between Uncoated and TiAlN+AlCrN Coated Carbide Tools in Hard Turning of AISI H11 Steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. (Accepted)
  8. K. Debnath, M. Roy Choudhury, S. Chaitanya, I. Singh, and T.S. Srivatsan. Drilling of Injection Moulded Natural Fiber-Reinforced Composites Using Different Drill Bits: Analysis of Force, Temperature, and Damage. International Journal of Precision Technology. (Accepted)
  9. M. Roy Choudhury, H. Dutta, M.S. Srinivas, K. Debnath, T. Arunkumar, and V. Upadhyay. Optimizing Drilling Parameters for Fly Ash-Filled Hemp/Epoxy Composites: Investigating Drill Bit Geometries, Feed Rates, and Spindle Speeds. Materials Research Express, Vol. 11(6), 065302, 2024.
  10. M.R. Pal, K. Debnath, and R.N. Mahapatra. Optimization of Machining Parameters and Analysis of the Surface Characteristics in Micro-Electrical Discharge Machining of 310 and 316 Stainless Steel. Journal of Materials Engineering and Performance, Vol. 33(11), 5422–5438, 2024.
  11. S. Singh, R. Bhaskar, K.B. Narayanan, A. Kumar, and K. Debnath. Development of Silicon Carbide (SiC)-Based Composites as Microwave-Absorbing Materials (MAMs): A Review. Journal of the European Ceramic Society, Vol. 44, 7411–7431, 2024.
  12. H. Dutta, S. Chaurasia, T. Arun Kumar, S. Muralidharan, and K. Debnath. A Novel Investigation on Rotary Tool-Assisted Electrical Discharge-Micro Drilling of Carbon-Aramid Hybrid Composites. Materials Letters, Vol. 367, 136628, 2024. 
  13. H. Dutta, S. Saha, K. Debnath, D.K. Sarma, M. Roy Choudhury, and A. Bhowmik. Optimizing Processing Parameters in Electrical Discharge Milling of CFRP Using Metaheuristics. Materials and Manufacturing Processes, Vol. 39(8), 1131-1143, 2024.
  14. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Degradation Characteristics of the Pineapple Leaf Fibre Reinforced Green Composite Developed by Injection Moulding Under Different Environmental Conditions. Industrial Crops and Products, Vol. 214, 118429, 2024.
  15. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Recycling and Degradation Behaviour of the Bamboo Fibre Reinforced Green Composite Fabricated by Injection Moulding. Sustainable Materials and Technologies, Vol. 39, e00865, 2024.
  16. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Mechanical, Thermal, Morphological, and Fibre Characteristics During Injection Moulding of Green Composites. Fibers and Polymers, Vol. 25(1), 331-346, 2024.
  17. K. Debnath, B.C. Behera, M. Rout, and G. Surya Rao. Fabrication of Micro-Hole in 3D Printed CFRP Composite by Electrical Discharge Machining Process. Journal of Advanced Manufacturing Systems, Vol. 22(4), 741-752, 2023.
  18. S.K. Yadav, A. Singh, and K. Debnath. Experimental Investigation of Powder-Mixed Electrolyte on CFRP Composites using Electrochemical Discharge Machining Process. International Journal of Machining and Machinability of Materials, Vol. 25(3/4), 293-314, 2023.   
  19. A. Gaikwad, K. Debnath, and M.K. Gupta. Effects of Alkaline-Acid Treatment on the Physiochemical Attributes of Natural Cellulosic Fibre of Arundo Donax L. Journal of Applied Polymer Science, Vol. 140(48), e54724, 2023.
  20. S.K. Yadav, A. Singh, K. Debnath, S. Grover, and S. Singh. Experimental Investigation and Comparative Study Between Machining of CFRP Composite and CNT-Mixed CFRP Composite Using ECDM Process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 45(9), 454, 2023.
  21. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Mechanical, Thermal, and Morphological Behavior of Pineapple Leaf Fibre and Polylactic Acid Green Composites Fabricated by Varying Fibre Loading, Fibre Length, and Injection Parameters. Polymer Engineering and Science, Vol. 63(8), 2498-2510, 2023. 
  22. G. Surya Rao, R. Paul, S. Singh, and K. Debnath. Influence of Conventionally Drilled and Additively Fabricated Hole on Tensile Properties of 3D-Printed ONYX/CGF Composites. Journal of Materials Engineering and Performance, Vol. 32(13), 5849–5861, 2023.
  23. R. Davis, A. Singh, K. Debnath, A.K. Keshri, P. Soares, L. Sopchenski, H.A. Terryn, and V. Prakash. Surface Modification of Biodegradable Mg Alloy by Adapting μEDM Capabilities with Cryogenically-Treated Tool Electrodes. The International Journal of Advanced Manufacturing Technology, Vol. 126(9-10), 4617-4636, 2023.
  24. R. Vishwakarma, S. Kesarwani, R.K. Verma, K. Debnath, and J.P. Davim. Using Harris Hawk Algorithm for Experimental Study on the Hole Dilation Mechanism During Micro-Machining (µM) of Graphene Nanoplatelets/Carbon Fiber (GnP/C) Reinforced Polymeric Composite. Materials Research Express, Vol. 10(2), 024005, 2023.
  25. R. Davis, A. Singh, K. Debnath, P. Soares, S.H. Och, A.K. Keshri, L. Sopchenski, and H.A. Terryn. Enhanced Abrasive-Mixed-μ-EDM Performance towards Improved Surface Characteristics of Biodegradable Mg AZ31B Alloy. The International Journal of Advanced Manufacturing Technology, Vol. 124(7-8), 2685-2700, 2023. 
  26. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Multi-Response Optimization of the Chemical Treatment Process Parameters Influencing the Tensile, Flexural, Compression, and Shear Properties of the Injection Moulded Green Composites. Journal of Polymers and the Environment, Vol. 31(1), 112-130, 2023. 
  27. R. Rathore, S. Bhattacharjee, P. Bora, G. Surya Rao, S. Samanta, and K. Debnath. Effect of Injection Parameters on Tensile and Flexural Properties of Green Composites. Composites Theory and Practice, Vol. 22(4), 196-204, 2022. 
  28. G. Surya Rao, K. Debnath, R.N. Mahapatra, and T.S. Srivatsan. A Critical Review on Mechanical and Morphological Characteristics of Injection Molded Biodegradable Composites. Polymer Composites, Vol. 43(12), 8634-8672, 2022.
  29. S. Kesarwani, R.K. Verma, and K. Debnath. Modified JAYA Algorithm for Machinability Assessment and Conflicting Response Optimization During Milling of Nanostructured Carbon Onions Reinforced Epoxy Composites. Experimental Techniques, Vol. 46, 1007–1025, 2022.
  30. H. Dutta, K. Debnath, and D.K. Sarma. Experimental Investigation of Parametric Effects and Characterization of the Machined Surface in μED-milling of CFRP Composite. Arabian Journal for Science and Engineering, Vol. 47, 16341–16353, 2022.
  31. S.K. Yadav, A. Singh, and K. Debnath. Analysis of Mass Concentration and Morphology of Fume Particles During ECDM of CFRP Composites. Materials Science Forum, Vol. 1073, 29-35, 2022.
  32. S.K. Yadav, A. Singh, and K. Debnath. Investigation of Machining Characteristics During Micro-Hole Fabrication in CFRP Composite by ECDM Process. Engineering Research Express, Vol. 4, 035055, 2022. 
  33. H. Dutta, K. Debnath, and D.K. Sarma. Preliminary Investigation of Powder-Mixed Microelectrical Discharge Drilling of CFRP Composite. Surface Review and Letters, Vol. 29(8), 2250111, 2022. 
  34. M. Roy Choudhury, G. Surya Rao, K. Debnath, and R.N. Mahapatra. Analysis of Force, Temperature, and Surface Roughness During End Milling of Green Composites. Journal of Natural Fibers, Vol. 19(13), 5019-5033, 2022. 
  35. M. Roy Choudhury and K. Debnath. Analysis of Hybrid Joints of Green Composites Under Tensile and Compressive Loadings. Green Materials, Vol. 10(2), pp. 70-82, 2022.
  36. A. Das, D. Barrenkala, K. Debnath, P. Kumar, R. Rajan, and S.K. Patel. Comparative Assessments of Machining Forces in 3D Printed Polymer Composite During Milling Operation Using Two Coated Carbide End Mills. Materials Today: Proceedings, Vol. 62, pp. 6107-6114, 2022.
  37. S.K. Yadav, A. Singh, and K. Debnath. Experimental Study of Hole Overcut and Taper During Electrochemical Discharge Machining (ECDM) of CFRP Composite. Materials Today: Proceedings, Vol. 59, pp. 1054-1058, 2022. 
  38. R. Davis, A. Singh, K. Debnath, R.M. Sabino, K. Popat, P. Soares, A.K. Keshri, and B. Borgohain. Enhanced Micro-Electric Discharge Machining-Induced Surface Modification on Biomedical Ti-6Al-4V Alloy. Journal of Manufacturing Science and Engineering, Vol. 144(7), 071002, 2022.
  39. A. Kumar, O. Vichare, K. Debnath, and M.K. Paswan. Fabrication Methods of Metal Matrix Composites (MMCs). Materials Today: Proceedings, Vol. 46, pp. 6840-6846, 2021.
  40. H. Dutta, K. Debnath, and D.K. Sarma. Investigation on Cutting of Thin Carbon Fiber-Reinforced Polymer Composite Plate Using Sandwich Electrode-Assisted Wire Electrical-Discharge Machining. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 235(5), pp. 1628-1638, 2021.
  41. R. Davis, A. Singh, K. Debnath, R.M. Sabino, K. Popat, L.R.R. da Silva, P. Soares, and A.R. Machado. Surface Modification of Medical-Grade Ni55.6Ti44.4 Alloy via Enhanced Machining Characteristics of Zn Powder Mixed-μ-EDM. Surface and Coatings Technology, Vol. 425, 127725, 2021. 
  42. R. Davis, A. Singh, K. Debnath, M.J. Jackson, P. Soares, F.L. Amorim, and H. Dutta. Effect of Powder Particle Concentration and Tool Electrode Material amid Zinc Powder-Mixed µEDM of Biocompatible Mg Alloy AZ91D. Journal of Materials Engineering and Performance, Vol. 30(8), pp. 5704-5718, 2021. 
  43. G. Surya Rao, K. Debnath, and R.N. Mahapatra. Finite Element Analysis of Low-Velocity Impact Behavior of Green Composites. Materials Today: Proceedings, Vol. 46, pp. 1290-1297, 2021. 
  44. A.K. Samanta, K. Debnath, and M.K. Paswan. Review of Weldability of E 450 Grade High Strength Structural Steel. AIP Conference Proceedings, Vol. 2341, 040010, 2021. 
  45. H. Dutta, K. Debnath, and D.K. Sarma. Improving the Micro-Electrical-Discharge Drilling Performance of Carbon Fiber-Reinforced Polymer: Role of Assisting-Electrode and Shaped Tool. International Journal of Machining and Machinability of Materials, Vol. 23(2), pp. 191-207, 2021. 
  46. D. Prakash, M. Tariq, R. Davis, A. Singh, and K. Debnath. Influence of Cryogenic Treatment on the Performance of Micro-EDM Tool Electrode in Machining of Magnesium Alloy AZ31B. Materials Today: Proceedings, Vol. 39, pp. 1198-1201, 2021. 
  47. M. Roy Choudhury and K. Debnath. Improving the Mechanical Performance of Resistance-Welded Green Composite Joints Using Different Heating Elements. Polymer Testing, Vol. 94, 107059, 2021. 
  48. M. Roy Choudhury, H. Dutta, and K. Debnath. Analysis of Entry and Exit Delamination During Micro-Drilling of Green Composites Using Response Surface Methodology. International Journal of Precision Technology, Vol. 9(2/3), pp. 175-190, 2020. 
  49. N. Kumar, A. Singh, and K. Debnath. Influence of Surface Modification on the Performance of Borassus Fruit Fiber Composites. Emerging Materials Research, Vol. 9(3), pp. 686-694, 2020. 
  50. H. Dutta, K. Debnath, and D.K. Sarma. Multi-objective Optimization of Hole Dilation at Inlet and Outlet During Machining of CFRP by µEDM Using Assisting-Electrode and Rotating Tool. The International Journal of Advanced Manufacturing Technology, Vol. 110(9-10), pp. 2305-2322, 2020.  
  51. A.B. Khelkar, B.K. Debnath, and K. Debnath. Use of Sinusoidal Surface Profile in the Absorber Tube of a Parabolic Trough Solar Collector to Enhance Its Thermal Performance. Journal of Thermal Analysis and Calorimetry, Vol. 141(6), pp. 2589-2597, 2020. 
  52. N. Kumar, A. Singh, K. Debnath, and R. Ranjan. Mechanical Characterization of Animal Fibre-Based Composites. Indian Journal of Fibre & Textile Research, Vol. 45(3), pp. 293-297, 2020. 
  53. N. Kumar, A. Singh, and K. Debnath. Influence of Fiber Weight Ratio on the Mechanical and Water Absorption Performance of Borassus/Epoxy Composites. Materials Testing, Vol. 62(9), pp. 937-942, 2020. 
  54. J. Kumar, R.K. Verma, and K. Debnath. A New Approach to Control the Delamination and Thrust Force During Drilling of Polymer Nanocomposites Reinforced by Graphene Oxide/Carbon Fiber. Composite Structures, Vol. 253, 112786, 2020. 
  55. S. Kachhap, A. Singh, and K. Debnath. Process Optimization and Comparative Analysis of EDM and EDD Process in Machining Al6063/10% SiC Metal Matrix Composites. Indian Journal of Engineering & Materials Sciences, Vol. 27(3), 750-756, 2020. 
  56. V. Dhawan, K. Debnath, I. Singh, and S. Singh. Neural Network Modeling of Forces in Drilling of Glass/Epoxy Composites Filled with Agro-based Waste Materials. Indian Journal of Engineering & Materials Sciences, Vol. 27(3), 649-658, 2020. 
  57. H. Dutta, K. Debnath, and D.K. Sarma. Improving the Performance of µED-Milling Using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites. Materials Today: Proceedings, Vol. 28, pp. 755-760, 2020. 
  58. M. Roy Choudhury and K. Debnath. Analysis of Tensile Failure Load of Single-Lap Green Composite Specimen Welded by High-Frequency Ultrasonic Vibration. Materials Today: Proceedings, Vol. 28, pp. 739-744, 2020.
  59. A.K.R. Sharma, M. Roy Choudhury, and K. Debnath. Experimental Investigation of Friction Stir Welding of PLA. Welding in the World, Vol. 64(6), pp. 1011-1021, 2020. 
  60. N. Kumar, A. Singh, K. Debnath, and N. Kumar. Water Absorption and Mechanical Behaviour of Borassus Fruit Fibre-Reinforced Composites. Emerging Materials Research, Vol. 9(1), pp. 10-17, 2020.
  61. M. Roy Choudhury and K. Debnath. A Study of Drilling Behavior of Unidirectional Bamboo Fibre-Reinforced Green Composites. Journal of The Institution of Engineers (India): Series C, Vol. 101(2), pp. 219-227, 2020.
  62. M. Roy Choudhury and K. Debnath. Experimental Analysis of Tensile and Compressive Failure Load in Single-Lap Adhesive Joint of Green Composites. International Journal of Adhesion and Adhesives, Vol. 99, 102557, 2020. 
  63. R.M. Mazarbhuiya, H. Dutta, K. Debnath, and M. Rahang. Surface Modification of CFRP Composite Using Reverse-EDM Method. Surfaces and Interfaces, Vol. 18, 100457, 2020. 
  64. S. Roy, T. Bose, and K. Debnath. Behaviour of Glass Fiber-Reinforced Composite with Delamination Under Iosipescu Shear Test. International Journal of Modern Manufacturing Technologies, Vol. XI, No. 2, pp. 119-125, 2019. 
  65. M. Roy Choudhury and K. Debnath. On the Analysis of Compressive Failure Load of Single-Lap Bolted Joint of Green Composites. IOP Conference Series: Materials Science and Engineering, Vol. 635, 012028, 2019. 
  66. M. Roy Choudhury and K. Debnath. A Review of the Research and Advances in Electromagnetic Joining of Fiber-Reinforced Thermoplastic Composites. Polymer Engineering and Science, Vol. 59(10), pp. 1965-1985, 2019. 
  67. P.K. Gupta and K. Debnath. Electrochemical Discharge Machining of Glass Fiber-Reinforced Composites: A Challenging Approach. Journal of Physics: Conference Series, Vol. 1240, 012044, 2019. 
  68. M. Roy Choudhury and K. Debnath. Experimental Analysis of Tensile and Compressive Failure Load in Single-Lap Bolted Joint of Green Composites. Composite Structures, Vol. 225, 111180, 2019. 
  69. S. Kachhap, A. Singh, and K. Debnath. A Study of Material Removal During Electrical-Discharge Drilling of Hybrid Metal Matrix Composites. Journal of Scientific & Industrial Research, Vol. 78(6), pp. 364-367, 2019.  
  70. H. Dutta, K. Debnath, and D.K. Sarma. A Study of Material Removal and Surface Characteristics in Micro-electrical Discharge Machining of Carbon Fiber-Reinforced Plastics. Polymer Composites, Vol. 40(10), pp. 4033-4041, 2019. 
  71. K. Debnath, V. Dhawan, I. Singh, and T.S. Srivatsan. Wear and Frictional Behaviour of Composites Filled with Agro-Based Waste Materials. Emerging Materials Research, Vol. 8(1), pp. 84-93, 2019. 
  72. S. Roy, T. Bose, and K. Debnath. Detection of Local Defect Resonance Frequencies Using Bicoherence Analysis. Journal of Sound and Vibration, Vol. 443, pp. 703-716, 2019. 
  73. M. Roy Choudhury, M.S. Srinivas, and K. Debnath. Experimental Investigations on Drilling of Lignocellulosic Fiber Reinforced Composite Laminates. Journal of Manufacturing Processes, Vol. 34, pp. 51-61, 2018. 
  74. S. Kachhap, A. Singh, and K. Debnath. Electric Discharge Drilling of Hybrid Metal Matrix Composites Using Different Tool Electrodes. Journal of Scientific & Industrial Research, Vol. 77(6), pp. 325-329, 2018. 
  75. K. Debnath, I. Singh, and T.S. Srivatsan. An Innovative Tool for Engineering Good Quality Holes in Composite Laminates. Materials and Manufacturing Processes, Vol. 32(9), pp. 952-957, 2017. 
  76. K. Debnath and I. Singh. Low-Frequency Modulation-Assisted Drilling of Carbon-Epoxy Composite Laminate. Journal of Manufacturing Processes, Vol. 25, pp. 262-273, 2017.
  77. K. Debnath, I. Singh, and A. Dvivedi. On the Analysis of Force During Secondary Processing of Natural Fiber Reinforced Composite Laminates. Polymer Composites, Vol. 38(1), pp. 164-174, 2017. 
  78. P.K. Bajpai, K. Debnath, and I. Singh. Hole Making in Natural Fiber-Reinforced Polylactic Acid Laminates: An Experimental Investigation. Journal of Thermoplastic Composite Materials, Vol. 30(1), pp. 30-46, 2017. 
  79. A.V. Singhal, K. Debnath, I. Singh, and B.S.S. Daniel. Critical Parameters Affecting Mechanical Behavior of Natural Fiber Reinforced Plastics. Journal of Natural Fibers, Vol. 13(6), pp. 640-650, 2016.
  80. K. Debnath, A. Sisodia, A. Kumar, and I. Singh. Damage-Free Hole Making in Fiber-Reinforced Composites: An Innovative Tool Design Approach. Materials and Manufacturing Processes, Vol. 31(10), pp. 1400-1408, 2016.
  81. V. Dhawan, K. Debnath, I. Singh, and S. Singh. Prediction of Forces During Drilling of Composite Laminates Using Artificial Neural Network: A New Approach. FME-Transactions, Vol. 44(1), pp. 36-42, 2016. 
  82. V. Dhawan, K. Debnath, I. Singh, and S. Singh. A Novel Intelligent Software-based Approach to Predict Forces and Delamination During Drilling of Fiber-Reinforced Plastics. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 230(2), pp. 603-614, 2016. 
  83. V.K. Doomra, K. Debnath, and I. Singh. Drilling of Metal Matrix Composites: Experimental and Finite Element Analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 229(5), pp. 886-890, 2015. 
  84. K. Debnath, I. Singh, and A. Dvivedi. Rotary Mode Ultrasonic Drilling of Glass Fiber-Reinforced Epoxy Laminates. Journal of Composite Materials, Vol. 49(8), pp. 949-963, 2015. 
  85. D. Varshney, K. Debnath, and I. Singh. Mechanical Characterization of Polypropylene (PP) and Polyethylene (PE) Based Natural Fiber Reinforced Composites. International Journal of Surface Engineering and Materials Technology, Vol. 4(1), pp. 16-23, 2014. 
  86. K. Debnath, I. Singh, and A. Dvivedi. Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites. Materials and Manufacturing Processes, Vol. 29(11-12), pp.1401-1409, 2014.  
  87. K. Debnath, I. Singh, and A. Dvivedi. Evaluation of Surface Roughness During Rotary-Mode Ultrasonic Drilling of Glass/Epoxy Composite Laminates. Journal of Production Engineering, Vol. 17(1), pp. 16-20, 2014.
  88. K. Debnath, V. Dhawan, I. Singh, and A. Dvivedi. Adhesive Wear and Frictional Behavior of Rice Husk Filled Glass/Epoxy Composites. Journal of Production Engineering, Vol. 17(1), pp. 21-26, 2014. 
  89. K. Debnath, I. Singh, and A. Dvivedi. Dry Sliding Wear Behaviour of Glass Fibre Reinforced Epoxy Composites Filled with Natural Fillers. Reason-A Technical Journal, Vol. XII, pp. 61-68, 2013. 

Conference Proceedings:

  1. K. Debnath, G. Surya Rao, and P.N. Rao. Life Cycle Assessment (LCA) of Flax-Based Green Composite Product Fabricated by Injection Moulding Process. 7th International Conference on Mechanical Engineering and Robotics Research [ICMERR 2022], Krakow, Poland, 09-11th December, 2022, pp. 168-174.
  2. S.K. Yadav, A. Singh, and K. Debnath. Morphological Analysis of the Machined Surface During Nanopowder Mixed Micro-Electric Discharge Drilling (PM-μEDD) of Mg Alloy AZ91D. 8th International and 29th All India Manufacturing Technology, Design and Research Conference [AIMTDR 2021], PSG College of Technology & PSG Institute of Technology and Applied Research, Tamil Nadu, India, 09-11th December, 2021, pp. 475-485.
  3. R. Vishwakarma, R.K. Verma, and K. Debnath. Investigation on Micro Electric Discharge Machining of Polymer Nanocomposites Modified by Graphene Nanoplatelet. 8th International and 29th All India Manufacturing Technology, Design and Research Conference [AIMTDR 2021], PSG College of Technology & PSG Institute of Technology and Applied Research, Tamil Nadu, India, 09-11th December, 2021, pp. 331-341.
  4. G. Surya Rao, K. Debnath, and R.N. Mahapatra. FEA-Based Prediction of Tensile and Flexural Properties of Green Composites Under Different Fiber Loading. 8th International and 29th All India Manufacturing Technology, Design and Research Conference [AIMTDR 2021], PSG College of Technology & PSG Institute of Technology and Applied Research, Tamil Nadu, India, 09-11th December, 2021, pp. 217-230.
  5. A. Das, G. Surya Rao, K. Debnath, and R.N. Mahapatra. Parametric Investigation on Drilling Behavior of 3D Printed CFRP Composites. Online Conference on Processing and Characterization of Materials [CPCM 2020], National Institute of Technology Rourkela, Odisha, India, 18-20th December, 2020, pp. 223-233.
  6. S.K. Yadav, A. Singh, and K. Debnath. Powder-Mixed Micro-Electrical Discharge Machining of Biodegradable AZ91D Magnesium Alloy: An Experimental Investigation. International Conference on Industrial and Manufacturing Systems [CIMS 2020], National Institute of Technology Jalandhar, Punjab, India, 09-11th October, 2020, pp. 387-404.
  7. S. Roy, T. Bose, and K. Debnath. Nonlinear Ultrasonic Wave Spectroscopy for Detecting Local Defect Resonance Frequency in Delaminated GLARE Plate. The 12th International Workshop on Structural Health Monitoring [IWSHM 2019], Stanford University, California, USA, 10-12th September, 2019, pp. 2279-2286. 
  8. H. Dutta, K. Debnath, and D.K. Sarma. A Study of Wire Electrical Discharge Machining of Carbon Fibre Reinforced Plastic. 7th International and 28th All India Manufacturing Technology, Design and Research Conference [AIMTDR 2018], College of Engineering Guindy, Anna University, Tamil Nadu, India, 13-15th December, 2018, pp. 451-460. 
  9. S. Vishwakarma, P.K. Mehar, B.K. Debnath, and K. Debnath. Computational Analysis of Internally Grooved Absorber Tubes of Parabolic Trough Solar Collector for Constant Mass Flow Rate of the Heat Transfer Fluid. International Conference on Recent Innovations & Developments in Mechanical Engineering [IC-RIDME 2018], National Institute of Technology Meghalaya, Meghalaya, India, 8-10th November, 2018, pp. 1267-1279. 
  10. S. Vishwakarma, B.K. Debnath, K. Debnath, and B. Das. Comparative Analysis of Absorber Tubes of Parabolic Trough Solar Collector Using Therminol VP-1 as Heat Transfer Fluid. International Conference on Recent Innovations & Developments in Mechanical Engineering [IC-RIDME 2018], National Institute of Technology Meghalaya, Meghalaya, India, 8-10th November, 2018, pp. 1227-1240. 
  11. S. Roy, T. Bose, and K. Debnath. Detection of Local Defect Resonance Frequencies for Defect Imaging: A Nonlinear Ultrasound-Based Approach. International Conference on Recent Innovations & Developments in Mechanical Engineering [IC-RIDME 2018], National Institute of Technology Meghalaya, Meghalaya, India, 8-10th November, 2018, pp. 1163-1172. 
  12. N. Kumar, P. Avinash, A. Singh, and K. Debnath. Effect of Fiber Orientation on the Tensile and Wear Properties of Flax Fiber-Reinforced Composites. International Conference on Recent Innovations & Developments in Mechanical Engineering [IC-RIDME 2018], National Institute of Technology Meghalaya, Meghalaya, India, 8-10th November, 2018, pp. 505-513. 
  13. M. Roy Choudhury and K. Debnath. Drilling Analysis of Natural Fiber-Reinforced Polylactic Acid Composites Fabricated by Hot Compression Moulding. International Conference on Recent Innovations & Developments in Mechanical Engineering [IC-RIDME 2018], National Institute of Technology Meghalaya, Meghalaya, India, 8-10th November, 2018, pp. 487-496. 
  14. S. Vishwakarma, K. Debnath, and B.K. Debnath. Thermal Performance Study of Helically Grooved Absorber Tubes for Parabolic Trough Solar Collector. Proceedings of the ASME 2018 Power Conference [ASME, POWER 2018], The Disney's Contemporary Resort, Lake Buena Vista, USA, 24-28th June, 2018, pp. V001T06A009. 
  15. S. Roy, T. Bose, and K. Debnath. Analytical and Numerical Study of Local Damage Resonance Frequencies in Fibre Metal Laminates. 2nd International Conference on Energy, Power and Environment: Towards Smart Technology [ICEPE 2018], National Institute of Technology Meghalaya, Meghalaya, India, 1-2nd June, 2018, pp. 1-5. 
  16. S. Roy, T. Bose, and K. Debnath. Influence of the Delamination Geometry on the Shear Behaviour of Glass/Epoxy Composites. National Conference on Advanced Materials, Manufacturing and Metrology [NCAMMM 2018], CSIR-CMERI, Durgapur, West Bengal, India, 16-17th February, 2018, pp. 66-91. 
  17. M. Roy Choudhury, K. Debnath, and V. Upadhyay. Drilling of Unfilled Hemp/Epoxy and Fly Ash Filled Hemp/Epoxy Composites: Analysis of Force and Temperature. Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXV], The University of Auckland, Auckland, New Zealand, 22-25th January, 2017, pp. 750-765.
  18. K. Debnath, M. Roy Choudhury, S. Chaitanya, I. Singh, and T.S. Srivatsan. Drilling Investigation of Injection Molded Short Sisal Fiber Reinforced Polypropylene Composites. Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXV], The University of Auckland, Auckland, New Zealand, 22-25th January, 2017, pp. 738-749.
  19. I. Singh, U.K. Komal, P.K. Rakesh, and K. Debnath. Is Hole Making in Fiber Reinforced Polymers (FRPs) a Challenging Task? Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXV], The University of Auckland, Auckland, New Zealand, 22-25th January, 2017, pp. 572-579.
  20. K. Debnath, M. Sisodia, I. Singh, and T.S. Srivatsan. Design and Development of an Innovative Tool for Making of Good Quality Holes in Composite Laminates. Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials [PFAM-XXIV], Kansai University, Osaka, Japan, 18-20th December, 2015, pp. 458-465.
  21. V. Dhawan, K. Debnath, I. Singh, and S. Singh. Prediction of Thrust Force During Drilling of Glass Fiber-Reinforced Composite Laminates Using Artificial Neural Network. National Conference on Latest Developments in Materials, Manufacturing and Quality Control [MMQC-2015], Giani Zail Singh Punjab Technical University Campus, Bathinda, Punjab, India, 19-20th February, 2015, pp. 385-389.
  22. D. Jindal, K. Debnath, and I. Singh. Seismic Performance of an Unreinforced Masonry Building: Finite Element Analysis. National Conference on Latest Developments in Materials, Manufacturing and Quality Control [MMQC-2015], Giani Zail Singh Punjab Technical University Campus, Bathinda, Punjab, India, 19-20th February, 2015, pp. 380-384.
  23. V. Dhawan, K. Debnath, and S. Singh. Prediction and Comparison of Thrust Force and Torque in Drilling of Glass/Epoxy Composites Filled with Natural Fillers. Twenty-Third International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXIII], Indian Institute of Technology Roorkee, Uttarakhand, India, 5-7th December, 2014, Vol. 1, pp. 170-178.
  24. V. Dhawan, S. Singh, K. Debnath, and S. Wadhawan. Predictive Modeling of Drilling-Induced Damage in Drilling of Composite Laminates Using Fuzzy Logic. Twenty-Third International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXIII], Indian Institute of Technology Roorkee, Uttarakhand, India, 5-7th December, 2014, Vol. 1, pp. 110-118.
  25. K. Debnath, I. Singh, and A. Dvivedi. Drilling Behavior of Natural Fiber Reinforced Polymer (Thermosetting and Thermoplastic) Composites. Twenty-Second International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXII], National University of Singapore, Singapore, 18-20th December, 2013, pp. 685-690.
  26. K. Debnath, V. Dhawan, I. Singh, and A. Dvivedi. Effect of Natural Fillers on Wear Behavior of Glass Fiber Reinforced Epoxy Composites. International Conference on Research and Innovations in Mechanical Engineering [ICRIME-2013], Guru Nanak Dev Engineering College, Punjab, India, 24-26th October, 2013, pp. 441-450. 
  27. V. Dhawan, K. Debnath, I. Singh, and S. Singh. Drilling of Glass Fibre Reinforced Epoxy Laminates with Natural Fillers: Thrust Force Analysis. International Conference on Research and Innovations in Mechanical Engineering [ICRIME-2013], Guru Nanak Dev Engineering College, Punjab, India, 24-26th October, 2013, pp. 105-115. 
  28. K. Debnath, I. Singh, and A. Dvivedi. Development and Tribological Characterization of GFRP Laminates with Natural Fillers. 4th International and 25th All India Manufacturing Technology, Design and Research Conference [AIMTDR-2012], Jadavpur University, West Bengal, India, 14-16th December, 2012, Vol. II, pp. 771-775.
  29. K. Debnath, I. Singh, and A. Dvivedi. Ultrasonic Vibration Assisted Hole Making in Glass-Epoxy Laminates. Twenty-First International Symposium on Processing and Fabrication of Advanced Materials [PFAM-XXI], Indian Institute of Technology Guwahati, Assam, India, 10-13th December, 2012, Vol. II, pp. 969-974.

Paper & Poster Presentations:

  1. M.R. Pal, K. Debnath, and R.N. Mahapatra. An Experimental Investigation and Comparison Between Steel 310 and 316 During a Micro-EDM Process. 4th International Conference on Processing and Characterization of Materials [ICPCM-2022] and 12th National Conference on Processing and Characterization of Materials [NCPCM-2022], National Institute of Technology Rourkela, Odisha, India, 09-11th December, 2022. 
  2. A.D. Dubey, O.R. Aryan, S. Chaurasia, and K. Debnath. Electrical-Discharge Milling of 3D Printed Polymer Composite using Different Electrodes Fabricated by Electrical-Discharge Grinding Process. North East Research Conclave [NERC 2022], Indian Institute of Technology Guwahati, Assam, India, 20-22nd May, 2022.
  3. K. Debnath, B.C. Behera, and M. Rout. Analysis of Different Process Parameters of 3D Printing and Micro-EDM for Fabricating Precise Micro-Hole in CFRP Composites. 2nd International Workshop on Structural Integrity of Additively Manufactured Materials [SIAMM22], Brono, Chez Republic, 4-5th February, 2022.
  4. P. Chattoraj and K. Debnath. Reduction of Thermal Gradient of Molten Pool in AM Process. National Conference on Advancement of Manufacturing and Structuring [AMS 2021], The ICFAI Foundation for Higher Education, Hyderabad, India, 15th November, 2021.
  5. P. Chattoraj, M.L. Pavan Kishore, and K. Debnath. Structural Analysis of 3D Printed Scapula Prosthesis. National Conference on Advancement of Manufacturing and Structuring [AMS 2021], The ICFAI Foundation for Higher Education, Hyderabad, India, 15th November, 2021.
  6. P. Chattoraj, A. Manmadhachary, and K. Debnath. Structural Analysis of 3D Printed Dental Implant Using Different Materials. National Conference on Advancement of Manufacturing and Structuring [AMS 2021], The ICFAI Foundation for Higher Education, Hyderabad, India, 15th November, 2021.
  7. A.B. Khelkar, B.K. Debnath, and K. Debnath. Use of Sinusoidal Surface Profile in the Absorber Tube of a Parabolic Trough Solar Collector to Enhance Its Thermal Performance. 2nd International Mechanical Engineering Congress [IMEC 2019], National Institute of Technology Tiruchirappalli, Tamil Nadu, India, 29th November-1st December, 2019.
  8. K. Debnath. Secondary Manufacturing of Sustainable Polymer-based Fiber-Reinforced Composites. International Symposium on Sustainable Polymers [ISSP-2019], Indian Institute of Technology Guwahati, Assam, India, 23-25th August, 2019.
  9. M. Roy Choudhury and K. Debnath. Experimental Analysis of Failure Load in Single-Lap Hybrid Joint (Bonded/Bolted) of Green Composites. 40th MATADOR International Conference on Advanced Manufacturing and Design [MATADOR-2019], Hangzhou, China, 8-10th July, 2019.
  10. P.K. Gupta and K. Debnath. Experimental Study on Electro Chemical Discharge Machining of Sustainable Materials. Third International Conference on Sustainable Energy and Environmental Challenges [3rd SEEC], Indian Institute of Technology Roorkee, Uttarakhand, India, 18-21st December, 2018. 
  11. M. Roy Choudhury, J. Ghosh, V. Upadhyay, and K. Debnath. Influence of Tool Geometry and Cutting Parameters on the Quality of Hole During Drilling of Hemp Fibre Reinforced Composites. The 4th International Conference on Advances in Materials and Materials Processing [iCAMMP-iv], Indian Institute of Technology Kharagpur, West Bengal, India, 5-7th November, 2016.
  12. K. Debnath, I. Singh, and T.S. Srivatsan. Innovation in Making of Damage-Free Holes in Fiber-Reinforced Plastics (FRPs). Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials [PFAM-XXIV], Kansai University, Osaka, Japan, 18-20th December, 2015.
  13. K. Debnath, I. Singh, and A. Dvivedi. Analysis and Modelling of Forces in Drilling of Nettle/Epoxy Composite Laminates. 9th Asian-Australasian Conference on Composite Materials [ACCM-9], Suzhou, China, 15-17th October, 2014.
  14. K. Debnath, I. Singh, and A. Dvivedi. Comprehensive Analysis of Forces During Drilling of Nettle/Polypropylene Bio-Composites. International Symposium on Green Manufacturing and Applications [ISGMA-2014], Busan, South Korea, 24-28th June, 2014.
  15. K. Debnath, I. Singh, and A. Dvivedi. Vibration-Assisted Drilling of Carbon Fiber Reinforced Composites. Twenty-Second International Conference on Processing and Fabrication of Advanced Materials [PFAM-XXII], National University of Singapore, Singapore, 18-20th December, 2013.
  16. K. Debnath, I. Singh, and A. Dvivedi. Rotary Ultrasonic Drilling of Glass/Epoxy Composite Laminates. International Conference and Exhibition on Reinforced Plastics [ICERP-2013], Bombay Exhibition Center, Mumbai, India, 4-6th April, 2013.
  17. S. Biswas, K. Debnath, and A. Patnaik. Mechanical Behavior of Short Bamboo Fiber Reinforced Epoxy Composites Filled with Alumina Particulate. Kathmandu Symposia on Advanced Materials [KASAM-2012], Nepal Polymer Institute, Kathmandu, Nepal, 09-12th May, 2012.
  18. K. Debnath, A. Dvivedi, and I. Singh. Wear Behavior of Glass/Epoxy Composites Filled with Rice Husk. Third International Multicomponent Polymer Conference [IMPC-2012], Mahatma Gandhi University, Kottayam, Kerala, India, 23-25th March, 2012.
  19. S. Biswas and K. Debnath. Effect of Alumina Particulate on Erosion Wear Behaviour of Short Bamboo Fiber Reinforced Epoxy Composites. 11th Annual UNESCO/IUPAC Workshop and Conference on Functional Polymeric Materials and Composites [FPMC-2011], University of Stellenbosch, South Africa, 26-29th April, 2011.
  20. K. Debnath and S. Biswas. Mechanical Behavior of Particulate Filled Short Glass Fiber Reinforced Epoxy Composites: Effect of Filler Type and Content. International Conference on Advances in Polymer Science and Rubber Technology [APSRT-2011], Indian Institute of Technology Kharagpur, West Bengal, India, 3-5th March, 2011.