65. Air-cooled and PCM-cooled battery thermal management systems of an electric vehicle: a technical review
Hole, J.A., Devshette, A.R., Arakerimath, R.R., ...Kumar, A., Rathore, S.S.
Engineering Research Express 7(2) 2025
64. Optimizing Performance and Emissions of VCR Diesel Engines Using Grey-Taguchi Methods and ANN with Biodiesel from Waste Cooking Soybean Oil
Hole, J., Kajale, T., Pawar, A., ...Dubal, S.
International Journal of Heat and Technology
43(1), pp. 228-240,2025
63. Selection of Optimal Waste Cooking Soybean Oil Biodiesel Blends for Emission Reduction in CI Diesel Engines Under Variable Loads: A Combined Analytic Hierarchy Process (AHP)-Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) Analysis
ole, J., Kajale, T., Pawar, A., ...Dubal, S.
International Journal of Automotive Science and Technology
8(4), pp. 457-466,2024
62. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF VACUUM INFUSED RHA REINFORCED POLYMER COMPOSITES
Hole, J., Patil, N.A., Wankhede, S., ...Kumbhar, P., Andhare, S.
UPB Scientific Bulletin Series D Mechanical Engineering
86(2), pp. 225-2382024
61. RSM approach for optimising engine operating parameters of VCR engine fuelled with Xanthium strumarium L. seed oil biodiesel blends
Hole, J., Pawar, S., Bankar, M.
International Journal of Ambient Energy
44(1), pp. 1271-1283, 2023
60 Use of Fatty Acid Chemical Composition for Predicting Higher Calorific Value of Biodiesel
Hole, J., Pawar, S., Bankar, M., ...Khan, S., Wankhade, S.Materials Today Proceedings,2023
59. A comparative performance and emission investigation CI engine fuelled with neem oil esters with varying engine compression ratios
Hole, J.A., Srinidhi, C., Jawale, M., ...Utikar, V., Channapattana, S.V.
Heat Transfer 51(8), pp. 7990-8004 2022
58 A Taguchi Method Optimization for Engine Parameters of VCR Engine Fuelled with Xanthium strumarium L. Oil Biodiesel Blend
Hole, J., Pawar, S., Bankar, M.
International Journal of Renewable Energy Research
12(3), pp. 1584-1600 , 2022
57 An Experimental Investigation of Wear Particles Emission and Noise Level from Smart Braking System
Hole, J.A., Patil, L.N., Khairnar, H.P., ...Panchal, R.N., Hiwase, V.B.
Evergreen, 9(3), pp. 711-720 , 2022
56 MOORA and TOPSIS based selection of input parameter in solar powered absorption refrigeration system
Hole, J.A., Wankhede, S.V.
International Journal of Ambient Energy
43(1), pp. 3396-3401, 2022
55. Performance of tetrafluoroethane (R134a)-dimethyl formamide (DMF) diffusion absorption air cooling system with variable power input
Hole, J.A., Wankhede, S.V., Patil, B.L.
International Journal of Ambient Energy
43(1), pp. 2019-2025
54 Studies on Xanthium strumarium L seed Oil : Biodiesel Synthesis and Process Optimization
Material Today : Proceedings
Elsevier
Web of Science , Scopus & UGC
2022
53 Proposed strategies to achieving financial strength of Indian teacher
Turkish Journal of Physiotherapy and Rehabilitation;
Turkish Physiotherapy Association Publication
Scopus & UGC
2021
0.14
52 Syllabus Structure of Product Based Education and Product Economy
Journal of Xi'an University of Architecture & Technology
JXUAT Publication
Scopus & UGC
2021
0.203
51 Disaster management planning to fight against COVID-19 war
Journal of Xi'an University of Architecture & Technology
JXUAT Publication
Scopus & UGC
2021
0.203
50 Performance of Tetrafluoroethane (R134a) -Dimethylformamide (DMF) diffusion absorption air cooling system with variable power input
International Journal of Ambient Energy
Taylor & Francis
Web of Science , Scopus & UGC
2020
1.74
49 MOORA and TOPSIS Based Selection of Input Parameter in solar powered absorption refrigeration system
International Journal of Ambient Energy
Taylor & Francis
Web of Science , Scopus & UGC
2020
1.74
48 Experimental Comparison and Validation in the Simulation of Natural and Forced Convection Used in Photovoltaic Setup
International Journal of Advanced Science and Technology
Science and Engineering Research Support Society
Scopus & UGC
2020
47 The effect of Nickel oxide nano-additivies in Azadirachtaindica biodiesel-diesel blend on engine perfromance and emission characteristics bt varying compression ratio
Environmental Progress and Sustainable Energy
Wiley-Blackwell
Web of Science , Scopus & UGC
2020
1.73
46 Estimating Calorific value of biodiesel using free fatty acid chemical composition
International Journal of Mechanical and Production Engineering Research and Development
Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC)
Scopus & UGC
2020
45 Correcting Working Postures and Reducing the Effect of Pollution is Improves Environment and Productivity of Thermal Power Plant.
Asian Journal of Chemical and Environmental Research
Peer reviewed and UGC Listed
2008
44 Continuous Exposure to Hot Temperature Work Environments does Affect the Productivity of Thermal Power Plant
Asian Journal of Chemical and Environmental Research
Peer reviewed and UGC Listed
2008
43 Experimental Investigation and Performance Evaluation of Stepped Solar Still with ETC Collector
International Journal of Advanced Research in Engineering and Technology
IAEME Publication
Scopus & UGC
2020
42 Review of various techniques for separating free fatty acids from vegetable oil.
International Journal of Advanced Research in Engineering and Technology
IAEME Publication
Scopus & UGC
2020
41 Preliminary Optimization of Duel Fuel Engine using Dimethyl Ether Premixed Combustion
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 10 | Oct 2018 www.irjet.net p-ISSN: 2395-0072
IRJET
Publication
UGC Approved Journal
2018
40 Effect of Dimethyl Ether Port Injection on Direct
Injection Diesel Engine
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ
Volume 6 Issue X, Oct 2018
IJRASET
Publication
UGC Approved Journal
2018
39 Experimental Investigation of Radiator using TiO2 Nano fluid As Coolant
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 08 | Aug 2018 www.irjet.net p-ISSN: 2395-0072
IRJET
Publication
UGC Approved Journal
2018
38 Experimental Investigation of Pipe in Pipe Tube Heat Exchanger Using Sio2 Nanofluid
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 08 | Aug 2018 www.irjet.net p-ISSN: 2395-0072
IRJET
Publication
UGC Approved Journal
2018
37 Oxidation Stability Improvement of Biodiesel by using Antioxidant and its effect on Engine Performance Combustion and Emission
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887
Volume 6 Issue VIII, August 2018- Available at www.ijraset.com
IJRASET
Publication
UGC Approved Journal
2018
36 Investigation On Performance and Emission Characteristics Of C.I. Engine Fuelled With Honne Oil Methyl Ester”
International Journal of Engineering and Science Invention (IJESI)
Volume 3 Issue 5 May 2014 PP.59-66
IJESI
Publication
UGC Approved Journal
2014
35 “INTRODUCTION TO VARIOUS BIODIESEL FUEL ADDITIVES FOR
IMPROVING CI ENGINE PERFORMANCE”
Journal of Analysis and Computation (JAC) (An International Peer Reviewed Journal), www.ijaconline.com, ISSN 0973-2861
JAC
Publication
UGC Approved Journal
2019
34 A Review of A Latent Heat Storage Through PCMs with VCC System Integrations for Domestic Refrigerator
International Journal of Innovative Science and Research Technology ISSN No:-2456 –2165
IJISRT Publication
Peer reviewed
2018
33 Performance Evaluation of Heat Pipe using Hybrid Nanofluid
IJSRD - International Journal for Scientific Research & Development| Vol. 6, Issue 03, 2018 | ISSN (online): 2321-0613
IJSRD
Publication
Peer reviewed
2018
32 Parameter affecting productivity of solar still and improvement technique –A detailed review
International Journal of engineering technology and management and applied sciences Feb.2017, volume -05 Issue -02 ISSN 2349-4476
IJETMAS
Publication
Peer reviewed
2017
31 Experimental setup of exhaust gas recirculation system of engine performance work on biodiesel blend
International Journal of Innovative Science and Research Technology)
Volume 03, Issue 05 May 2018 ,ISSN 2456-2165
IJISRT
Publication
Peer reviewed
2018
30 Experimental analysis and CFD Analysis of Helical Coiled Tube Heat Exchanger
International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 ©2016
IJCET
Publication
Peer reviewed
2016
29 Experimental and CFD Analysis of Helical Coil Tube Heat Exchanger
IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613
IJSRD Publication
Peer reviewed
2016
28 Exhaust Heat Recovery and Performance Improvement of Jaggery Making Furnace
International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161
©2016, All Rights Reserved Available at http://inpressco.com/category/ijcet
IJCET
Publication
Peer reviewed
2016
27 A review on waste Heat recovery and Utilization of Exhaust gas of IC Engine
International Journal of scientific Research and Development Volume: 3, Issue: 1, March 2015
ISSN: 2321-0613
IJSRD Publication
Peer reviewed
2015
26 Performance and Emission Analysis of 4 Stroke Compression Ignition Engine Using Turmeric Leaf Oil as a Fuel
International Journal of Multidisciplinary Research and Development
Volume: 2, Issue: 9, 703-706 ,Sep 2015,e-ISSN: 2349-4182
p-ISSN: 2349-5979
IJMRD Publication
Peer reviewed
2015
25 A Review on Alternative Fuel for Diesel
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 04, 2015 ISSN (online): 2321-0613
IJSRD Publication
Peer reviewed
2015
24 Heat Transfer Enhancement of tube in tube heat exchanger using CuO/H2O Nanofluid under turbulent flow.
International Journal of Mechanical, Civil, Automobile and Production Engineering, Vol. 3 No. 3 March 2013, ISSN : 2249-8303, p-ISSN : 2319-2208
IJMCAPE
Publication
Peer reviewed
2013
23 Design Analysis and performance evaluation of Heat
pipe-based intercooler for compressed air cooling in
Multistage compressor.
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT (IJSREM)
I. VOLUME: 03 ISSUE: 06 | JUNE -2019 ISSN: 2590-1892
IJSREM Publication
UGC & Peer reviewed
2019
22 Comparative Study of Analytical & Experimental Work for Enhancement of Rate of Heat Transfer in Automotive Radiator
JOURNAL FOR INNOVATIVE DEVELOPMENT IN PHARMACEUTICAL AND TECHNICAL SCIENCE Volume-2,Issue-10 (Oct-2019) ISSN (O) :- 2581-6934
ITDPTS publication
Peer reviewed
2019
21 Experimental Study on Enhancement of COP of VCC Refrigeration System by using Diffuser after Compressor
IJSRD - International Journal for Scientific Research & Development| Vol. 7, Issue 05, 2019 | ISSN (online): 2321-0613
IJSRD Publication
Peer reviewed
2019
20 Performance Evaluation of Heat Pipe using TiO2 – CuO Nanofluid
IJSRD - International Journal for Scientific Research & Development| Vol. 6, Issue 06, 2018 | ISSN (online): 2321-0613
IJSRD Publication
Peer reviewed
2018
19 Review Paper on Radiators By Using Different Nano-Fluid
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE)
e-ISSN: 2278-1684,p-ISSN: 2320-334X ,PP. 64-66
www.iosrjournals.org
IOSR-JMCE Publication
Peer reviewed
2018
18 A novel household refrigerator with a phase change material (PCM) heat exchanger: An experimental investigation
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,ISSN: 2320-334X, Volume 15, Issue 3 Ver. I (May. - June. 2018), PP 72-82 www.iosrjournals.org
IOSR-JMCE Publication
Peer reviewed
2018
17 Synergetic effect on engine performance, combustion, emission by using additive biodiesel
International Engineering Research Journal (IERJ), Volume 3 Issue 1 Page 4845-4850, 2018 ISSN 2395-1621
IERJ Publication
Peer reviewed
2018
16 A Review on different domestic design of solar still
International Journal of multidisciplinary and current research ISSN 2321-3124 Nov. 2016
IJMCR Publication
Peer reviewed
2016
15 A Review of poly phenylene sulphide material for spiral coil in shell heat exchanger
International engineering research journal special issue pp. 329-333 june 2016 ISSN 2395-1621
IERJ Publication
Peer reviewed
2016
14 Review of Analysis of Heat Recovery from Top
Coat Oven Exhaust in Paint Shop
International Journal of Engineering Research & Technology (IJERT)
ISSN: 2278-0181
IJERTV4IS020909 www.ijert.org
(This work is licensed under a Creative Commons Attribution 4.0 International License.)
Vol. 4 Issue 02, February-2015
IJERT
Publication
Peer reviewed
2015
13 Waste Heat Recovery from Engine Exhaust by using Heat Wheel.
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, PP 84-87 www.iosrjournals.org
IOSR-JMCE Publication
Peer reviewed
2015
12 Experimental validation of heat transfer enhancement in plate heat exchanger with nonconventional shapes of rib
International Journal of Science, Engineering and Technology Research (IJSETR) Vol. 5 Issue 03, March-2016
(IJSETR) Publication
Peer reviewed
2016
11 Review of Heat Transfer Enhancement in Plate Heat Exchanger with Non-Conventional Shapes of Rib
International Journal of Engineering Research & Technology (IJERT)
ISSN: 2278-0181
IJERTV4IS020909 Vol. 4 Issue 02, February-2015
IJERT Publication
Peer reviewed
2015
10 Nano fluid based radiator for efficient and compact design
IJISRT (International Journal of Innovative Science and Research Technology) Vol.3, Iss.05 May 2018 ISSN 2456-2165
IJISRT Publication
Peer reviewed
2018
9 Experiment on Heat Transfer Through Fins Having Different Notches
International Journal of Engineering Research & Technology (IJERT)
Vol. 2 Issue 12, December - 2013
IJERT Publication
Peer reviewed
2013
8 Use of Peltier Effect To Increase The COP Of Air
Conditioning System
Global Journal of Engineering Research and Technology
ISSN 2249-3107 Volume 5, Number 1 (2015), pp. 91-101
GJERT Publication
Peer reviewed
2015
7 A Review on use of Peltier Effects
Pratibha: international journal of science, spirituality, business and technology (IJSSBT), Vol. 2, No. 2, May 2014 ISSN (Print) 2277—7261
Pratibha Publication
2014
6 Simultaneous improvement of safety and productivity using ergonomic in thermal power plant –A Case study
International journal, of emerging technologies and applications in engineering , technology and sciences
Vol.3 , issue 2 ISSN No. 0974-3588
IJETAETS publication
2010
5 To demonstrate the heat transfer ability and effectiveness of helical coil tube type heat exchanger in counter flow
Journal of thermal engineering and technology Vol.01, Iss. 01 2016, ISSN No.
MANTECH Publication
2016
4 Preliminary optimization of duel fuel engine using dimethyle ether premixed combustion
International Research Journal of Engineering and Technology Vol.05, issu.07 , 2018 , ISSN no. 2395-0072
IRJET Publication
2018
3 Practical Approaches to Ergonomics Interventions in Workplaces and Improvements of Productivity, Occupational Health and Safety of Ergonomic in the Power Generation Plant.
International journal, of Innovation in Mechanical and Automobile Engineering, Issue-II
ISSN :2249-2968
IJIMAE
Publication
2012
2 Simultaneous improvement of Safety and Productivity using Ergonomics in Thermal Power Plant - A Case Study
International journal, of Innovation in Mechanical and Automobile Engineering, Issue-II
ISSN :2249-2968
IJIMAE
Publication
2012
1 Ergonomically perfect workplace design to improve the productivity of boiler in sugarcane factory
International journal, of Innovation in Mechanical and Automobile Engineering, Issue-II
ISSN :2249-2968
IJIMAE
Publication
2012
Research Publication in Conference
20) International conference on renewable energy sources.(JSPM’S RSCOE, Tathawade, Pune) ,2020
Recent methods of extracting oil from seeds for producing biodiesel
19) International conference on renewable energy sources.(JSPM’S RSCOE) 2020
An overview of flat plate collector installed with transparent insulating material
18) International conference on renewable energy sources.(JSPM’S RSCOE),2020
Development and recent trends in wind energy
17)2nd World congress on Engineering and Applications( WCEA-2017), Pattaya, Thailand, 2017
Experimental investigation and performance evaluation of solar still with phase change material (PCM)
16) 2nd World congress on Engineering and Applications( WCEA-2017), Pattaya, Thailand, 2017
Utilization of solar energy with the help of Flat Plate Solar Collector (FPSC) Installed with Transparent Insulating Material (TIM) to operate vapour absorption refrigeration system
15)International conference on mechanical and aerospace Engineering, Oxford,Aug.19-20,2017
Analysis of Spiral Path Single Actuator Solar Tracking System to Maximize Solar Panel Output
14)International conference on Latest concept in science , Technology and Management ,NITTTR & MHRD Govt.of India , Chandigad, India , 5th February 2017
Parameter affecting Productivity of solar still and improvement technique :A Detailed Reveiw
13) National Symposium on Engineering and Technology,2016 (NSET 2016),11th – 12th March, 2016, Pune, Maharashtra, India.
Sources of noise generation in wind turbine
12)National conference on “Innovation in Engineering Sciences & Technology at RSCOE and SPPU Pune, 28&29th December 2015
Waste heat recovery from engine exhaust by using heat wheel
11)IEEE,IEEM09 , Hong Kong, Dec.09 -11,2009
Worker Productivity, And Occupational Health, Safety And Environmental Issues In Thermal Power Plants.
10)International 15th ISME AME Conference At RGPV Bhopal, March 18-19, 2008
Practical Approaches to Ergonomics Interventions in Workplaces and Improvements of Productivity, Occupational Health and Safety of Ergonomic in the Power Generation Plant.
9)NCIME2012 AT Sinhagad Institute of technology, Lonawala on 19th & 20th April 2012
Working posture does effects on workers productivity of sugar industries
8) Natural Resource Management for Sustainable Development, 1st And 2nd Feb., 2010.
Working Postures and Environmental Effects Does Effects on Workers’ Productivity of Thermal Power Plant
7) National Seminar On Innovation In Mechanical Engg. JTMCOE Faizpur Jan, 28-29,2010
Productivity Improvement Using Ergonomics
6)National Seminar On Innovation in Mechanical Engg. JTMCOE Faizpur July 27, 2007.
Optimizing Levels of Productivity and Efficiency in the Power Generation Industry
5)National Conference on Natural resource management for Sustainable development,
NMU Jalgaon,
Working posture and Environmental effects does effects on workers productivity of thermal Power plants
4)National seminar on Automation in Mechanical Engg. JTMCOE Faizpur July 27, 2004.
Automation in Automotive Crash Test
3) National seminar on Automation in Mechanical Engg. JTMCOE Faizpur July 27, 2004.
Computational Modeling of the Generation and Transport of Aerodynamic losses in Turbine Blades Rows
2)National seminar on Automation in Mechanical Engg. JTMCOE Faizpur July 27, 2004.
Robotics & Its Application in Automation
1)National seminar on “Geo-Environmental Hazards- A Future Perspective” GEO-ENVIR 2003 JTMCOE Faizpur Oct. 6-7, 2003.
Reduction of Environmental Pollution through fly Ash Collector in Industries