Research & Consultancy Projects
Research & Consultancy Projects
CONSULTANCY OFFERED
(a) Experimental:
Slump Test
Compaction Factor Test
Flow Table Test
Vee-Bee Consistometer Test
Compressive Strength Test (Cube / Cylinder)
Split Tensile Strength Test
Flexural Strength Test (Modulus of Rupture)
Modulus of Elasticity Test
Rapid Chloride Penetration Test (RCPT)
Water Absorption Test
Sorptivity Test
Permeability Test
Accelerated Carbonation Test
Half-Cell Potential Test
Surface Resistivity Test
Setting Time Test (Initial and Final)
Soundness Test
Heat of Hydration Test
Ultrasonic Pulse Velocity (UPV) Test
Rebound Hammer Test
Mix Design as per IS / ACI Guidelines
Cement Content and Water–Cement Ratio Verification
Core Cutting and Core Strength Testing
Chemical Analysis of Cement and Concrete
Sulphate Resistance Evaluation
Flexural Testing of RCC Beams
Shear Testing of Beams
Column Axial Load Capacity Test
Two-Point and Four-Point Loading Tests
Load–Deflection Behaviour Study
Bond Strength Test (Rebar–Concrete)
Pull-Out Test on Reinforcement
Universal Testing Machine (UTM) Test for tension, compression and bending
Bearing Capacity Test
Structural Model Testing (Scaled Models)
Impact Load Test
Buckling Test on Steel Members
Connection Testing (Bolted and Welded Joints)
Retrofitted Member Performance Testing
Rebound Hammer Test
Ultrasonic Pulse Velocity (UPV) Test
(b) Numerical:
FE Non-linear analysis using Abaqus
SAP Analysis of performance of multistorey building
ETABs
COMPLETED CONSULTANCY WOK
1. Performance of Engineering bricks made using waste materials and fly ash: 2024
2. Compressive strength of brick, concrete cubes: 2024
3. Rupture strength of concrete cube: 2024
4. In-direct tensile strength of concrete: 2024
5. Strengthening of Bridge Pier and Abutment: 2023
Supervisor: Dr. Vaibhav Singhal
This project focused on structural strengthening and performance evaluation of bridge pier and abutment components to enhance durability and load-carrying capacity under service and extreme loading conditions.
6. Rehabilitation of School Building, Sikkim: 2022
Supervisor: Dr. Vaibhav Singhal
Assessment and retrofitting of an existing school building to improve structural safety and seismic resilience.
7. Rehabilitation of Masonry Building (Patna): 2020
Supervisor: Dr. Vaibhav Singhal
Structural evaluation and strengthening of a heritage masonry building to improve its performance under seismic and service loads.
8. Testing & Rehabilitation of Fire-Burnt Buildings, Kishanganj: 2016
Supervisors: Dr. Vaibhav Singhal & Dr. Koushik Roy
Post-fire structural assessment and rehabilitation planning of damaged building structures.
9. Ph.D. Research Project
Title: Strengthening of Unreinforced Masonry Using Steel Wire Reinforced Cementitious Matrix (SWRCM)
The research involved experimental investigation and analytical modeling of masonry strengthening techniques to enhance in-plane and flexural performance under cyclic loading conditions.