Conference

10. Sang Min Yang+, Do Young Kim, Hyung Wook Park*, Analysis of the tool wear for a large pulsed electron beam (LPEB) irradiated cutting tools in the turning process of Ti-6Al-4V, World Congress on Micro and Nano Manufacturing (WCMNM), Evanston, USA, September 18-21 (2023)

9. Joon Hyeok Choe+, Sang Min Yang, Hyung Wook Park, Jisoo Kim*, Do Young Kim, Enhanced tool life of a tungsten carbide cutting tools via the surface modification using a large pulsed electron beam in machining of Ti alloys, International Conference of Manufacturing Technology Engineers (ICMTE), Ilsan, South Korea, May 25-26 (2023)

8. Do Young Kim+, Dong Min Kim, Dong Chan Kim, Hyung Wook Park*, Numerical modeling of the AISI 316LN plastic deformation during machining using a modified genetic algorithm, World Congress on Micro and Nano Manufacturing (WCMNM), Raleigh, USA, September 9-12 (2019)

7. Dong Min Kim, Do Young Kim+, Hyung Wook Park*, Experimental observation of the cryogenic assisted hard turning process, International Conference on Manufacturing, Machine Design and Tribology (ICMDT), Kagoshima, Japan, April 24-26 (2019)

6. Do Young Kim+, Dong Min Kim, Hyung Wook Park*, Predictive cutting force modeling for cryogenic end-milling of Ti-6Al-4V alloy, International Conference of Manufacturing Technology Engineers (ICMTE), Seoul, South Korea, October 2-5 (2018)

5. Do Young Kim+, Dong Min Kim, Hyung Wook Park*, Predictive cutting force modeling for cryogenic machining process considering micro-structural analysis of Ti-6Al-4V alloy, World Congress on Micro and Nano Manufacturing (WCMNM), Portoroz, Slovenia, September 18-20 (2018)

4. Do Young Kim+, Dong Min Kim, Hyung Wook Park*, Predictive force model for cryogenic milling process of CGI (Compacted Graphite Iron), International Conference of Asian Society for Precision Engineering and Nanotechnology Program (ASPEN), Seoul, South Korea, November 14-17 (2017)

3. Do Young Kim+, Dong Min Kim, Hyung Wook Park*, Predictive force model for cryogenic turning process using micro-structural analysis of Ti-6Al-4V alloy, World Congress on Micro and Nano Manufacturing (WCMNM), Kaohsiung, Taiwan, March 27-30 (2017)

2. Do Young Kim+, Dongmin Kim, Hyung Wook Park*, Force predictive model for cryogenic orthogonal cutting process of Ti-6Al-4V incorporating the phase transformation, International Symposium on Green Manufacturing and Applications (ISGMA), Bali, Indonesia, June 21-25 (2016)

1. Do Young Kim+, Dongmin Kim, Hyung Wook Park*, An experimental observation on cryogenic orthogonal cutting process of Ti-6Al-4V alloy, International Conference of Asian Society for Precision Engineering and Nanotechnology Program (ASPEN), Harbin, China, August 15-20 (2015)

26. M. G. Ha+, D. Y. Kim, J. S. Yoon*, A quality analysis study on process variables in machining of DED additive manufactured titanium, KSPE Spring Conference, Jeju, South Korea, May 8 – 10 (2024)

25. S. M. Yang+, D. Y. Kim, H. W. Park*, Analysis of the tool wear behavior in turning process of Ti-6Al-4V material based on large-pulsed electron beam irradiated cutting tool, KSPE Spring Conference, Jeju, South Korea, May 8 – 10 (2024)

24. D. Y. Kim+*, Improvement of machinability of difficult-to-cut material using energy beam irradiated cutting tool, KSMTE Autumn Conference, Jeju, South Korea, December 13 – 16 (2023)

23. M. G. Ha+, D. Y. Kim, J. S. Yoon*, A study on the quality analysis of DED lamication of titanium materials according to process variables, KSMTE Autumn Conference, Jeju, South Korea, December 13 – 16 (2023)

22. S. H. Lee+, M. G. Ha, Y. J. Kim, H. N. Kim, D. Y. Kim*, A study on process parameter in DED additive manufacturing of SCM415 material, KSME Spring Conference, Muju, South Korea, June 22 – 24 (2023)

21. S. H. Lee+, D. Y. Kim*, A study on deposition structure in DED additive manufacturing of steel, KSMTE Autumn Conference, Jeju, South Korea, December 11 – 14 (2022)

20. J. H. Ha+, Y. J. Kim, H. N. Kim, D. Y. Kim*, A study on the effect of post-processing parameter on surface quality in SLA additive manufactuing, KSMTE Autumn Conference, Jeju, South Korea, December 11 – 14 (2022)

19. S. H. Lee+, D. Y. Kim*, A study on the effect of DED process parameters on deposition characteristics of steel, KSPE Autumn Conference, Daegu, South Korea, October 19 – 21 (2022)

18. D. Y. Kim+, S. M. Yang, J. H. Choe, J. Kim, H. W. Park*, Analysis of WC tool wear according to Large Pulsed Electron Beam (LPEB) irradiation energy during titanium machining, KSMTE Spring Conference, Gangneung, South Korea, July 13 – 17 (2022)

17. G. H. Kim+, Y. S. Jung, J. H. Shin, S. H. Cha, J, K, Lee, D. Y. Kim*, J. H. Kim, Bearing Structure Analysis of T/L and T/S Decelerator for Harbor RTGC, KSME Spring Conference, Inje University, South Korea, June 10 (2022)

16. Y. S. Jung+, G. H. Kim, J. H. Shin, S. H. Cha, J, K, Lee, D. Y. Kim*, J. H. Kim, A Study on the Analysis of Deformation and Stress according to the Gear Loads of the Tire Crane Decelerator, KSME Spring Conference, Inje University, South Korea, June 10 (2022)

15. J Kim+*, D. Y. Kim, Study on the machinability of cryogenic milling for compacted graphite iron, KSMTE Autumn Conference, Jeju, South Korea, December 8 – 10 (2021)

14. D. Y. Kim+*, D Kim, Simulation model optimization for the stainless steel milling process using a genetic algorithm, KSMTE Spring Conference, Gangwon, South Korea, July 8 – 9 (2021)

13. Do Young Kim+*, Study on tool wear characteristics of the cryogenic milling process for titanium alloy, KSME Spring Conference, Busan, South Korea, June 30 – July 3 (2021)

12. Do Young Kim+*, Numerical and experimental analyses of the cryogenic machining process of difficult-to-machine materials, KSME Online Conference, December 16 - 24 (2020)

11. D. Y. Kim+*, H. W. Park, Numerical modeling for cryogenic end-milling of compacted graphite iron (CGI), KSMTE Spring Conference, Gangwon, South Korea, July 13 - 14 (2020)

10. D. Y. Kim+, D. M. Kim, O. B. Kwon, H. W. Park*, Simulation of the AISI 316LN milling process with the plastic behavior modeling, KSMTE Autumn Conference, Jeju island, South Korea, November 6 - 8 (2019)

9. Do Young Kim+, Dong Min Kim, Hyung Wook Park*, Predictive cutting force modeling for milling process of compacted graphite iron (CGI) material, KSAE Autumn Conference, Changwon, South Korea, November 9 (2018)

8. Do Young Kim, Dong Chan Kim, Oh Seop Kwon, Hyung Wook Park*+, Predictive modeling for cryogenic milling process of titanium alloy, KSME Spring Conference, Seoul, South Korea, May 31 – June 2 (2018)

7. D. Y. Kim+, D. M. Kim, H. W. Park*, Predictive cutting force modeling for cryogenic milling process incorporating an analysis of tool geometry, KSPE Autumn Conference, Gwangju Gyeonggi Province, South Korea, December 13-15 (2017)

6. D. Y. Kim+, D. M. Kim, H. W. Park*, Study on predictive cutting force model for cryogenic milling process of compacted graphite iron, KSPE Spring Conference, Jeju island, South Korea, May 17-19 (2017)

5. D. Y. Kim+, D. M. Kim, H. W. Park*, Study on machining characteristics for cryogenic orthogonal cutting process in different tool coatings, KSMTE Spring Conference, Daegu, South Korea, April 26-28 (2017)

4. D. Y. Kim+, D. Kim, H. W. Park*, Study on the force predictive model for cryogenic based milling process of titanium alloy, KSPE Autumn Conference, Yeosu, South Korea, October 25-28 (2016)

3. D. Y. Kim+, D. Kim, H. W. Park*, Force predictive model for cryogenic milling process of titanium alloy, KSPE Spring Conference, Jeju island, South Korea, May 11-13 (2016)

2. D. Y. Kim+, D. Kim, H. W. Park*, An analytical approach in cryogenic orthogonal machining process of Ti-6Al-4V alloy with phase transformation, KSPE Autumn Conference, Gangwon, South Korea, December 16-18 (2015)

1. D. Y. Kim+, D. M. Kim, H. W. Park*, An experimental and analytical approach in cryogenic orthogonal machining process of Ti-6Al-4V alloy, KSPE Spring Conference, Jeju island, South Korea, May 13-15 (2015)