what format? If your PC/MAC/Linux? box can read it but the error looks like the Ducky cant read it then format would be likely cause. Also visually check there's no fluff/dirt in the sd card slot, squirt of can air if you got it.

Else maybe you tried flashing one of the 3rd party firmware's and bricked the ducky? If so then try and get back to DFU boot mode by holding in button while plugging in. You may need drivers. But if hardware is detected (ideally a DFU device) then you should be able to recover. However if you cant get a working DFU bootmode (if there was a bad flash or not) then it looks like it may be a dead duck.

Download Rubber Ducky

DOWNLOAD 🔥 https://bltlly.com/2yGbU0 🔥

Hi friends I read all the posts here and I understand I have a similar problem, I tried to buy another sd card and in both cases the duck stays solid red. Do i Need to create a specific folder on the sd? Because I just put the bin file normally alone

You can also try to format the SD card in the same way as I've described it in my post linked below. It's aimed for the WiFi Pineapple Nano, but I use the same procedure for the Ducky as well, so it's "transparent".

I appreciate your response, I put the file this way on two different sd cards (the same one I got in the order and another one I made sure I had for backup) in both cases as soon as I connect the ducky to the computer I get a solid red light.

I have gone over the possible problems here ( -us/articles/360010555093-My-USB-Rubber-Ducky-shows-a-solid-red-LED-now-what-) and I can not troubleshoot where the problem is in my case.

maybe someone how sees this can share some wisdom with me ?

The truth is I have already tried with three different sd cards, and the problem remains, the support gave me steps to go through them but they also did not really solve the problem and I am pretty stuck

I did received mine today as well. However mine worked fine. I had the feeling that it was not going to do anything, but it did lighted up with a green led. A quick tip, do not use the SD card reader that comes with the Ducky. instead use another one. Mine SD card came blank, with no inject.bin. so I created one, the hello world to be exact, and then loaded it to the SD card and popped to to Ducky and it did worked just fine. I am totally new to the Ducky, so as long as I achieve what I'm trying to accomplish, I will give the Ducky 10 stars. ?

I got my ducky a few days ago and when i plugged it in for the first time nothing happened. I knew that a Hello World script was supposed to run. I thought that maybe it needed the right firmware so i flashed it with c_ducky.v2.1.hex using the master zip. I contacted Hak5 regarding my issue but still no response. I wrote my script, encoded it, and put it on the sd card. Still nothings happening. Please Help!

Hi to all, I've bought this device for pentesting and learning. I'm quite a newbie about that kind of hardware..but it seems that the actual Windows Defender of 1903 Windows Edition prevent every kind of payload working. Is that true? I've tried quite 50 payloads. With a System with Defender on it not starts at all. I've also flashed the Ducky with Twin Ducky...it seems that is worse..it takes sometimes to analyze the usb and sometimes finds the inject.bin and remove it. All payload with "gmail send" are not working because of authentication, every payload with password grabbing are not working because Nirsoft removed command line text export for security purposes...so this is a useless expensive usb key and nothing more?

Now, my question: It's really possibile outside Mister Robot series using that device in a real environment? Because I've invested about 20 hours on it and i don't find a way to make it really have a real use if the system is protected..but i've spent aout 90$ in my country for buying it.

Some of the payloads will not work due to security patches. This is not a device that you can plug into a computer and magically works just because you saw it in a video ... Obviously, you will have to modify and =/= or create (your own) payloads to bypass Windows Defender. I do not own a ducky, but I do own a bunny, which does work in a real environment (because I craft my own payloads).

Sorry...there must be a kind misunderstanding. I'm telling that if you plug the ducky into a Windows 10 actual environment, this environment doesn't permit the launch of the ininjection file...you're telling me that i've to improve. ? If isn't possible to launch a file from a USB keyboard emulator like Rubber Ducky is the device is useless and how do you right told, good only for demo online and for selling it. The thing that hurt me is that is still sold on Amazon and on the HAK5 site when it's clear that today you can't use it in a real environment. If you tell me that bunny works maybe i can try...but i've doubt that you can bypass a windows machine with an antivirus full modules enabled..have you tried? if not bypass, will turn also that hardware in a useless one.

Guess I need a little more info. What is the build of your win10 box? My latest is 17763 and the one I'm on at the moment is 14393. Both have defender fully updated and I've been testing different inject.bin files on my rubber ducks all day. One even has the twin duck firmware on it. Win10 and defender and not blocking or deleting anything. Could you give a bit more info on your machine? Or has anyone else run into issues with this as well? I'll gladly test what I can on my side to see if I can replicate the issues you are having.

Worse case you could always setup a VM and have it attack the VM and with that you could put any OS you want on there. But like theUNKNOWN said, you'll have to do some work to get the duck to do what you'd like to do.

The windows version i'm using is the latest 1903 (build 18362.295) the ducky has installed the 2.1 firmware, also tried with twin ducky 2.1 but has a keyboard bug i've seen so i've used 2.001. With twin ducky the AV inspect immediately the partition and lock the injection file, sometimes it removes it.

I've tried 2 phisical machines and 1 vm. Same behaviour. I still not understand what you guys mean when tell "you've to work on it", if the system lock immediately the usb device when you plug it you can work for years but there's no solution to that...making device a useless peace of plastic. :)

Ok so very briefly I tried mine on 1903 and still so far so good. That was a vm though and I probably didn't give it enough time to fully update itself. So I'm going to let it run for a bit and make sure everything is fully up to date. I'll also install it on a fresh system and see if that makes a difference at all. But you did bring up a very good point and that's firmware on the duck. Not sure how I can check mine but my ducks are older. I know back in the day there was a hardware version or something that had to do with the duck's color. I have a blue one and a green one. I think I've seen pics where there's red and maybe even black ones as well. Wouldn't think that would make a difference but maybe it does. I'll keep digging. I am glad to see that your experimenting a bit though, using two physical machines and a vm. Much better than some people just saying it doesn't work it doesn't work. Awesome that your troubleshooting. If you wouldn't mind, could you get an older version of Win10 and make a VM out of it? I'd be curious if you have the same issues or if it starts to work. One of the VMs I tested yesterday was from: -us/microsoft-edge/tools/vms/

Bob, firstly thank you..I own 35 technical certifications in systems, networks and security...I'm a 6 times MVP and a CEH...before coming here crying i've done somekind like 10 hours of trials. ? I'm quite sure that on a 1703 or 1803 Windows distribution is working, but, surely, i can do a try.

If Defender is in down in the system (and there's a different suite like Kaspersky for example) the Ducky runs. BUT if i put on rogue keyboard option in Kaspersky suite you obtain the same behaviour: the payload don't works at all. Now, as you understand, it's clear that i don't want a magic wand for hacking everything, but a simple system with a professional AV is quite mandatory today. When i go to attend at some colleagues speeches about cybersecuirty they're every time showing a magic disposal that putted on is working and cracks magically the host. I was tired to see that...so i tried to buy also a "magic one" but that has only enforced my idea..if a system is right protected, cracking it without a social engineering attack is quite impossibile.

Anyway, sorry for the talk. My duck is quite blue-green inside and black outside. It would be fantastic if you could tell the firmware you've installed..but there are only 3 versions i've found for classic duck and only other 3 for twin duck..all others ar for other purposes.

I wish I could have been more helpful but both a physical machine with 1903 and a vm with 1903 didn't seem to mind either of my ducks. Both were fully updated and I made sure defender had all of the latest definitions. Is there anything else that could make your machine not like the duck? Your just using the defender that came with Win10 correct? When you say you turn defender off and use Kaspersky you also run into issues, does that mean you have two AV's installed on your machine? If so I wonder if it's Kaspersky the whole time. Which if that's the case then that's a good thing...Kaspersky is smart enough to not let a computer fall for the duck. 152ee80cbc

how to download modern warship on pc

safari world bangkok map pdf download

naruto shippuden download game