Arduino

ARDUINO IS AN OPEN-SOURCE PHYSICAL COMPUTING PLATFORM DESIGNED TO MAKE EXPERIMENTING WITH ELECTRONICS MORE FUN AND INTUITIVE. ARDUINO HAS ITS OWN UNIQUE, SIMPLIFIED PROGRAMMING LANGUAGE, A VAST SUPPORT NETWORK, AND THOUSANDS OF POTENTIAL USES, MAKING IT THE PERFECT PLATFORM FOR BOTH BEGINNER AND ADVANCED DIY ENTHUSIASTS.

Circuit One

Circuit one original code

Slow blink

Using this diagram and the code, the LED should turn off and on by itself.

Circuit one manipulated code

The LED is programmed to blink so fast, so that the viewer barely can see it.

Circuit Two

A potentiometer is a device that connects its two outer pins to 5v while the middle pin outputs a voltage between 0 and 5 depending on the position of the potentiometer's knob. As you turn the knob the light begins to blink faster as it is in the video.

Circuit Three

Circuit Three orignial code

Circuit three manipulated code, it voids, or bypasses the main colors code.

Circuit Four

Circuit Four orignial code

Circuit Five

As the button is pushed, the LED lights up

Circuit Six

This code uses autoTune to turn the light on and off.

This code uses manualTune to turn the light on

Circuit Seven

As the sensor gains temperature, the light turns on. As the sensor cools down, the light turns off.

Circuit Seven manipulated code

Circuit Eight

I manipulated code to make the motor spin faster.

Further manipulated code, I changed the delay to make it move even faster.

Circuit Nine

Circuit nine original code

IMG_3658 (2).MOV

Maniupulated code to sound like jingle bells

IMG_3659.MOV

Circuit Ten

Circuit Ten working

Circuit Ten manipulated code, the motor will go on then off with speed instead of just on then off.

Circuit Eleven

Circuit Eleven with the relay alternating the lights.

Circuit Twelve

Circuit twelve original code working

Page updated

Google Sites

Report abuse