SolidWorks

Pressure Plate

Process

Product

Lesson 1-3

Revolves and Sweep (Understanding)

Pattern Features (Process)

Pattern Features (Understanding)

Loft Hammer hand (Process)

Loft Hammer hand ( Understanding)

Surfaces (Process)

3D Sketching (Process)

3D Sketching (Understanding)

Pressure Plate

Process

This lesson includes:

Creating base, boss, and cut features from sketches
Adding fillets to smooth edges
Creating a circular pattern
Adding drawing views
Adding centerlines, center marks, and dimensions to the drawing.

Media2.mp4

Product

Media3.mp4

Lesson 1-3

Lesson 1

Lesson 1 :

Setting up a new part document
Creating the base feature
Adding a boss feature
Creating a cut feature
Adding fillets
Adding a shell feature
Editing features
Completed Part

Media5.mp4

Lesson 2

Lesson 2 - Assemblies

Adding parts to an assembly
Moving and rotating components in an assembly
Creating display states in an assembly

Media4.mp4

The top of both so that they are on the same line.

Both right sides so that in the end they fit as a line is formed, meaning the box goes backwards and the other goes forwards.

Lesson 3

Fillets

Process

Building the Fillet Features Sample Part

The steps include: (Part 1)

Using relations in sketches
Adding draft angles to extruded features

Media10.mp4

Fillet Process ( part 2)

Adding different fillet types:

- Face
- Constant radius
- Variable radius
- Using mirroring to assure symmetry
Applying a library feature

Media11.mp4

Fillet Product

Media12.mp4

MOUSE GESTURES

Go to tools-customize.
In the bar select Enable mouse gestures.
You will get something like the first image
In the figure called part you will put the ones you prefer but first you have to change it to 8 gestures that you find Under Enable mouse gestures.
Press Ctrl to move and change it your way then press okey.
Finally, keep the right side of your mouse pressed and move it slowly.
The second image is my shape that I made using this trick

Revolves and Sweep

Creating a revolve Feature
Creating a Sweep Feature
Creating an extruded out feature with a draft angle

Revolves and Sweep (Understanding)

Pattern Features (Process)

First tried :

I've been having problems after making the figure, I have to make the rectangle that goes in the middle, after that you have to use Cut -Extrude, select through then use linear pattern for the others, and I would have to come out with the cut extrude, but that didn't happen to me and I did it many times and nothing disappeared, so I made the decision to do the opposite, that is to use pattern first and then use Extrude -Cut, in this one I couldn't find equations either so I didn't use it and I couldn't put my name either.

Second Tried : I still can not do it that way they ask, which is to use Extrude Cut first and then use Linear Pattern but I can't do it. But this time I found equation found in tools and I was able to put my name.
It took me less time, to be honest the first one took me 3 hours, this time two or less

Here in My Gif I'm showing my whole process how you can see there is not linear pattern because it wasnt working for me but I used is inside Sketch 4

Pattern Features (Understanding)

Loft Hammer hand (Process)

Loft Hammer hand ( Understanding)

Surfaces (Process)

3D Sketching (Process)

3D Sketching (Understanding)

Dileinka Fayruz Jimenez